SP 42-103-2003
СП 42-103-2003
|
|
Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
Проектирование и строительство газопроводов из полиэтиленовых труб и реконструкция изношенных газопроводов
Status: Effective
The set of rules applies to the design and construction of new gas pipelines from polyethylene pipes, as well as to the reconstruction of worn-out steel gas pipelines.
Свод правил распространяется на проектирование и строительство новых газопроводов из полиэтиленовых труб, а также на реконструкцию стальных изношенных газопроводов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
11/26/2003
SKU: RUSS143781
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
K.42 Gas supply »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.40 Gas supply systems »
As a Replacement Of:
SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter
SP 42-103-97: Renovation of steel underground gas pipelines used synthetic flexible pipes and complicated adhesiyes
SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 14192-96: Cargo marking
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 166-89: Vernier callipers. Specifications
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 18573-86: Wooden boxes for the production of chemical industry
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 19667-74: Special-purpose group container of gross mass 5,0 th for piece-goods
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2226-88: Paper bags
GOST 22852-77: Corrugated fibre boxes for products of instruments making industry. Specifications
GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure
GOST 2930-62: Measuring instruments. Characters and signs
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 4045-75: Hand-operated bench vice
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 9.402-80: Metal surface preparation for painting
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9142-90: Boxes of corrugated board. General specifications
GOST 9396-88: Boxes wooden reusable
GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
R 50-57-88: Procedure for Acceptance of Instruments for Repair and Release from Repair
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
SNiP 11-01-2003: Instructions on the order of development, coordination, approval and composition of project documentation for the construction of enterprises, buildings and structures
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
SP 42-103-97: Renovation of steel underground gas pipelines used synthetic flexible pipes and complicated adhesiyes
SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines
The Document is Referenced By:
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Order 5214: The list of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of application and execution of the Government of the Russian Federation of October 29, 2010 № 870 "On approval of technical regulations on the safety of gas distribution and gas consumption networks" (as amended on June 23, 2011) and implementation of conformity assessment
Order 5214: On approval of the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations "On safety of gas distribution and gas consumption networks" approved by the Government of the Russian Federation on October 29, 2010 N 870 (as amended on April 22, 2013) (lost force from 01.04.2022 on the order of Rosstandart from 10.01.2022 N 3)
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
