SP 42-101-96
СП 42-101-96
|
|
Design and construction of polyethylene gas pipeline up to 300 mm in diameter
Проектирование и строительство газопроводов из полиэтиленовых труб диаметром до 300 мм
Status: Not effective
The set of rules defines the rules for designing and building new and reconstructed gas pipelines from polyethylene pipes with a diameter of up to 300 mm and pressure up to 0.6 MPa, dilapidated steel gas pipelines with a pressure up to 0.3 MPa, restored by pulling polyethylene pipes into them, transporting natural gas, gas and gas and oil deposits that meet the requirements of GOST 5542-87, not containing aromatic and chlorinated hydrocarbons, and gas-air mixtures that do not contain these hydrocarbons.
Свод правил определяет правила проектирования и строительства новых и реконструируемых газопроводов из полиэтиленовых труб диаметром до 300 мм и давлением до 0,6 МПа , ветхих стальных газопроводов давлением до 0,3 МПа, восстанавливаемых методом протяжки в них полиэтиленовых труб, транспортирующих природные газы газовых и газонефтяных месторождений, отвечающие требованиям ГОСТ 5542-87, не содержащие ароматических и хлорированных углеводородов, и газовоздушные смеси, не содержащие указанных углеводородов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: JSC VNIIST,
5/14/1996
SKU: RUSS143782
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
K.42 Gas supply »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.40 Gas supply systems »
The Document is Replaced With:
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
The Document References:
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 21.610-85: System of building design documents. Gas supply. Outside gas pipe-lines. Working drawings
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
SNiP 1.06.05-85: Regulation on construction design supervision of enterprises, buildings and installation by design organizations
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-01-95: Instructions on the procedure of elaboration, coordination, approval, and composition of design documentation for construction of enterprises, buildings, and structures
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 3.01.04-87: Project acceptance for operation after construction
VSN 003-88: Design and Installation Guidelines to Plastic Piping
The Document is Referenced By:
Manual: Manual for impulse and low consumption fire extinguishing systems
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 51-1.15-004-97: Instructions on the design and construction of fiber-optic communication lines (FOCL) for gas pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
