imgalt

VSN 003-88

ВСН 003-88

Design and Installation Guidelines to Plastic Piping

Строительство и проектирование трубопроводов из пластмассовых труб

Status: Effective

Apply to the design and construction of new and reconstructed intra-and inter-site pipelines of oil and gas fields and pipelines - branches to individual consumers constructed from plastic pipes made of low-pressure polyethylene (HDPE), high-density polyethylene (LDPE), polypropylene (PP) and non-plasticized polyvinyl chloride (PVC) with a nominal diameter of from 50 to 600 mm inclusive with an excess pressure of the medium not more than 1 MPa (10 kgf

Распространяются на проектирование и строительство новых и реконструируемых внутри- и межплощадочных трубопроводов нефтяных и газовых промыслов и трубопроводов - ответвлений к отдельным потребителям, сооружаемых из пластмассовых труб, изготовленных из полиэтилена низкого давления (ПНД), полиэтилена высокого давления (ПВД), полипропилена (ПП) и непластифицированного поливинилхлорида (ПВХ) с условным диаметром от 50 до 600 мм включительно при избыточном давлении среды не более 1 МПа (10 кгс/см2) для транспортировки нефти, природного газа, попутного газа, стабильного конденсата, воды, водных растворов, ингибитора.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Minneftegazstroy, 7/15/1988

SKU: RUSS143790

Price: $947.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of oil and gas industry facilities »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Polymers »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 2003.200.13 Pipelines and their components »


As a Replacement Of:

VSN 190-85: Technology for Assembly and Welding of Polyethylene Piping in Oil and Gas Fields

The Document References:

GOST 11262-80: Plastics. Tensile strength test method.

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing

GOST 1465-80: Files

GOST 166-89: Vernier callipers. Specifications

GOST 18599-83: Polyethylene pressure pipes

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 24472-80: Marking instrument. Compasses. Types and main dimensions

GOST 24473-80: Marking instrument. Marking tools. Types and main dimensions

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5378-88: Vernier protractors. Specifications

GOST 6645-86: Hacksaw blades for metal cutting

GOST 6854-88: Woodworking equipment. Bandsawing machines. Basic parameters standards of accuracy

GOST 7502-98: Measuring metal tapes. Specifications

GOST 980-80: Flat ring saws for wood sawing

SN 478-80: Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes

SN 550-82: Specification for plastic process pipeline design

SNiP 2.04.03-85: Sewage. External systems and structures

SNiP 3.01.04-87: Project acceptance for operation after construction

SNiP 3.02.01-87: Earthen structures, foundation and basis

VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields

VSN 179-85: Guidelines for the Remediation of Lands Used for the Construction of Pipelines

VSN 190-85: Technology for Assembly and Welding of Polyethylene Piping in Oil and Gas Fields

VSN 51-3-85: Design of field steel pipelines

The Document is Referenced By:

Manual for SNiP 3.05.02-88: Manual on technology and organization of the construction of pipelines for gas supply systems in rural areas of the Non-chernozem zone of the RSFSR

SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter

SP 81.13330.2017: The reclamation systems and construction

TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"

VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!