MDS 40-2.2000
МДС 40-2.2000
|
|
Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
Пособие по проектированию автономных инженерных систем одноквартирных и блокированных жилых домов (водоснабжение, канализация, теплоснабжение и вентиляция, газоснабжение, электроснабжение)
Status: Effective
The allowance is necessary in the design of autonomous (decentralized) systems of water supply, sewerage, heating and ventilation, gas supply, power supply for single-family and blocked residential buildings.
Пособие необходимо при проектировании автономных (децентрализованных) систем водоснабжения, канализации, теплоснабжения и вентиляции, газоснабжения, электроснабжения для одноквартирных и блокированных жилых домов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the Russian Federation,
5/15/1997
SKU: RUSS143830
The Product is Contained in the Following Classifiers:
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.4 Requirements for protection of surface water bodies in implementation of activities »
2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.01 Engineering equipment of buildings in general »
The Document References:
Code 167-FZ: Water Code of the Russian Federation
Federal Law 174-FZ: Ecological Conformity Assessment
Federal Law 28-FZ: Civil Defense
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 13109-87: Electric energy. Requirements for quality of electric energy in general-purpose networks
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 2.114-70: Unified system for design documentation. Technical requirements. Rules for lay-out, wording and designing
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20448-90: Liquefied hydrocarbon fuel gases for domestic use. Specifications
GOST 23274-84: Mobile buildings. Electrical devices. General specifications
GOST 25297-82: Compact treatment plants for surface potable water. Types, basic parameters and dimensions
GOST 25298-82: Compact treatment plants for domestic sewage water. Types, basic parameters and dimensions
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 30331.1-95: Electrical installations of buildings. General
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 380-88: Common quality carbon steel. Grades
GOST 4543-71: Structural alloyed steel
GOST 4753-68: Lamp oil. Specification
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 8846-87: Knitted fabrics and garments. Methods for determination of linear dimensions, distortion number of courses and wales and yarn length in the loop
GOST 8847-85: Knitted fabrics. Methods for determination of breaking characteristics and extensibility under loads less than breaking loads
GOST 8948-75: Ductile iron and steel fittings with parallel thread for pipelines. Straight tees. Basic dimensions
GOST 8949-75: Ductile iron and steel fittings with parallel thread for pipelines. Transition tees. Basic dimensions
GOST 8950-75: Ductile iron fittings with parallel thread for pipelines. Tees with two passages. Basic dimensions
GOST 8951-75: Ductile iron fittings with parallel thread for pipelines. Straight four-way junction pieces. Basic dimensions
GOST 8952-75: Ductile iron fittings with parallel thread for pipelines. Transition four-way junction pieces. Basic dimensions
GOST 8953-75: Ductile iron fittings with parallel thread for pipelines. Four-way junction pieces with two passages. Basic dimensions
GOST 8954-75: Ductile iron fittings with parallel thread for pipelines. Straight short sockets. Basic dimensions
GOST 8955-75: Ductile iron fittings with parallel thread for pipelines. Straight long sockets. Basic dimensions
GOST 8956-75: Ductile iron fittings with parallel thread for pipelines. Compensation sockets. Basic dimensions
GOST 8957-75: Ductile iron fittings with parallel thread for pipelines. Transition sockets. Basic dimensions
GOST 8959-75: Ductile iron fittings with parallel thread for pipelines. Connection nuts. Basic dimensions
GOST 8963-75: Ductile iron fittings with parallel thread for pipelines. Plugs. Basic dimensions
GOST 8966-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Straight sockets. Basic dimensions
GOST 8968-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Lock-nuts. Basic dimensions
GOST 8969-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
NPB 106-95: One-Family Dwellings. Fire Protection Requirements
OST 102-39-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). Types, main parameters and dimensions
OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification
OST 34-42-758-85: Details and prefabricated units of TPS pipelines, Pnom≤4 MPa (40 kg/cm2). Welded flat caps. Construction and dimensions.
OST 34-42-759-85: Details and prefabricated units of TPS pipelines, Pnom≤4 MPa (40 kg/cm2). Welded flat caps with edges. Construction and dimensions.
OST 36-20-77: Pipeline details DN 500-1400 mm welded from carbon steel at PN <= 2.5 MPa (25 kgf / cm2) Forged and welded elbows R = 1,5 DN at an angle of 90 degrees
OST 36-21-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (about 25 kg/cm2). Sectional pipe-bend R = 1.5, Dy angle of 30°, 45°, 60° and 90°. Dimensions.
OST 36-22-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom ≤ 2.5 MPa (about 25 kg/cm2). Concentric and eccentric transitions. Dimensions.
OST 36-23-77: Pipeline details DN 500-1400 mm welded from carbon steel at PN
OST 36-24-77: Welded carbon steel pipeline fittings Dn 500 - 1400 mm for Рn ≤ 2.5 MPa (≈ 25 kgf/cm2)
OST 36-25-77: Pipeline details DN 500-1400 mm welded from carbon steel at PN <= 2.5 MPa (25 kgf / cm2) Elliptical plugs
OST 36-42-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Curved bends. Construction and dimensions.
OST 36-43-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Welded taps. Construction and dimensions.
OST 36-44-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Welded transitions. Construction and dimensions.
OST 36-46-81: Welded and bent piping parts made of carbon steel Dn up to 500 mm designed for Pn up to 10 MPa (100 kgf/cm2) welded t-joints
OST 36-47-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Flat caps. Construction and dimensions.
OST 36-48-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Finned caps. Construction and dimensions.
PB 12-245-98: Safety Requirements for Gas Supply Facilities
RDS 10-232-94: GOST R. certification system. Procedure for certification of products in construction
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SanPiN 2.1.4.027-95: Potable water and water supply of inhabited areas Sanitary protection zones Around water supply sources and domestic/ potable water mains
SanPiN 2.1.4.559-96: Potable water. Hygienic requirements to water quality in centralized potable water systems. Quality control
SanPiN 42-128-4690-88: Sanitary Regulations of Maintenance of Populated Areas
SanPiN 4630-88: Sanitary rules and standards for preservation of surface waters against pollution
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 3.05.01-85: Indoor plumbing systems
SNiP II-12-77: Noise protection
TU 14-3-190-82: Seamless steel pipes for boiler plants and pipelines
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.