SP 23-101-2000
СП 23-101-2000
|
|
Design of thermal performance of buildings
Проектирование тепловой защиты зданий
Status: Not effective
The rules establish requirements for the design of enclosing structures of buildings and structures for various purposes in accordance with SNiP II-3, providing for an optimal reduction in heat consumption during the operation of facilities.
Правила устанавливают требования по проектированию ограждающих конструкций зданий и сооружений различного назначения в соответствии со СНиП II-3, предусматривающими оптимальное сокращение расхода тепла при эксплуатации объектов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
12/22/2000
SKU: RUSS143849
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document is Replaced With:
SP 23-101-2004: Design of thermal protection of buildings
The Document References:
GOST 10140-80: Thermal insulating mineral wool slabs on bituminous binder. Specifications
GOST 10499-95: Heat insulating products made of glass staples fibre. Technical requirements
GOST 10632-89: Wood particle boards
GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10923-93: Ruberoid. Specifications
GOST 111-90: Polished glass. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12865-67: Expanded vermiculits.
GOST 15588-86: Polystyrene foam boards. Specifications
GOST 16136-80: Thermal insulating Perlite bitumen slabs. Specifications
GOST 16381-77: Thermal insulating building materials and products. Classification and general technical requirements
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 18108-80: Polyvinylchloride linoleum with heat and sound-insulating backing. Specifications
GOST 18124-95: Asbestos cement flat sheets. Specifications
GOST 19177-81: Rubber porous sealing gaskets
GOST 19222-84: Arbolit and its products. General specifications
GOST 20916-87: Foam plastic heat-insulating slabs based on resol phenol-formaldehyde resins. Specifications
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 21880-94: Thermo insulating mineral wool broached mats. Specifications
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22950-95: Mineral wool slabs of higher rigidity on synthetic bond. Specifications
GOST 23250-78: Building materials. Method of specific heat determination
GOST 23835-79: Rolled roofing and hydroinsulatings materials. Classification and general technical requirements
GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications
GOST 24816-81: Building materials. Method of hygroscopic moisture determination
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25380-82: Buildings and structures. Method of measuring density of heat flows passing through enclosure structures
GOST 25485-89: Cellular concretes. Specifications
GOST 25609-83: Soft and tile materials for floor covering. Procedure for determining the heat absorption value
GOST 25820-83: Lightweight concrete. Specifications
GOST 25891-83: Buildings and structures. Methods of determination of air tightness of enclosing structures
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26253-84: Buildings and structures. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26629-85: Buildings and structures. Method of thermovision control of enclosing structures of thermal insulation quality
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 2697-83: Roofing asphalt felt. Specifications
GOST 28013-89: Mortars. General specifications
GOST 28013-98: Mortars. General specifications
GOST 30256-94: Building materials and products. The method of the thermal conductivity determination by a cylindrical probe
GOST 30290-94: Building materials and products. Surface converter method of thermal conductivity determination
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 30547-97: Roofing and hydraulic insulating materials in rolls General specifications
GOST 379-95: Silicate brick and stones. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 4640-93: Mineral wool. Specifications
GOST 530-95: Ceramic bricks and stones. Technical specifications
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6266-97: Gypsum plasterboards
GOST 6428-83: Plaster slabs for partitions. Specifications
GOST 6617-76: Petroleum construction bitumen
GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control
GOST 7076-87: Building materials and products. Method of thermal conductivity determination
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7251-77: Polyvinilohloride linoleum with woven and unwoven backing. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8673-93: Plywood panels
GOST 8736-93: Sand for construction works. Specifications
GOST 8740-85: Linerboard
GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9462-88: Round timber of broadleaf sorts
GOST 9463-88: Round wood products
GOST 9480-89: Sawn facing slabs of stone. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9573-96: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
TU 5760-160-00284807-96: Polystyrene Concrete Thermal Insulating Slabs. Technical Specifications
The Document is Referenced By:
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 23-101-2004: Design of thermal protection of buildings
SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame
SP 55-102-2001: Structures made with gypsum fiber sheets
TR 12279-TI.2004: Thermal insulation products "Thermo" in enclosing structures of buildings and structures. Recommendations for use with technical solutions album
TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems
TSN 23-316-2000: Thermal protection of residential and public buildings. Tomsk region
TSN 23-319-2000 Krasnodar region: Energy efficiency in residential and public buildings. The norms for thermal performance of the buildings
TSN 23-320-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Chelyabinsk region
TSN 23-321-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Astrakhan region
TSN 23-322-2001: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Kostroma region
TSN 23-323-2001: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Khanty-Mansi Autonomous Area
TSN 23-324-2001: Energy-saving thermal protection of residential and public buildings. Komi Republic
TSN 23-325-2001: Energy efficiency of residential and public buildings. Energy-saving thermal protection of buildings. Design Standards. Altai region
TSN 23-326-2001: Energy efficiency of residential and public buildings. Guidelines for energy-efficient thermal protection of buildings. Republic of Kalmykia
TSN 23-327-2001: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Bryansk region
TSN 23-328-2001: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Amur region
TSN 23-331-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Chita region
TSN 23-332-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Penza region
TSN 23-333-2002: Energy consumption and thermal protection of residential and public buildings. Nenets Autonomous Okrug
TSN 23-334-2002: Energy efficiency of residential and public buildings. Standards for energy-saving heat protection. Yamal-Nenets Autonomous Okrug
TSN 23-335-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Ulyanovsk region
TSN 23-336-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kemerovo region
TSN 23-338-2002: Energy saving in civil buildings. Standards for heat consumption and heat protection. Omsk region
TSN 23-339-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Rostov region
TSN 23-340-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. St. Petersburg
TSN 23-341-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Ryazan Oblast
TSN 23-343-2002: Heat protection and energy consumption of residential and public buildings. The Republic of Sakha (Yakutia)
TSN 23-344-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Altai Republic
TSN 23-348-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Pskov region
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TSN 23-355-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kirov region
TU 5284-002-20582582-02: Three-layer metal panels with polyurethane foam insulation for enclosing structures. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
