imgalt

RMD 40-20-2013 Sankt-Peterburg

РМД 40-20-2013 Санкт-Петербург

Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

Устройство сетей водоснабжения и водоотведения в Санкт-Петербурге

Status: Not effective - Superseded

The document contains guidelines for technical customers, design and construction organizations for constructing new and reconstructing the existing water supply and wastewater networks in St. Petersburg from the outlet stop valves of the city’s waterworks to water metering stations, buildings and structures, as well as from control wells to reception chambers of sewage treatment plants of the city, with the exception of the objects specified in Article 48.1 of the Town Planning Code of the Russian Federation 151.

В документе содержатся методические указания для технических заказчиков, проектных и строительных организаций по устройству новых и реконструкции существующих сетей водоснабжения и водоотведения на территории Санкт-Петербурга от выходных запорных задвижек водопроводных станций города до водомерных узлов учета, зданий и сооружений, а также от контрольных колодцев до приемных камер очистных сооружений города, за исключением объектов, указанных в статье 48.1 Градостроительного кодекса Рф 151.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Committee for the Construction of the Government of St. Petersburg, 10/25/2013

SKU: RUSS143870


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of Russian Federation subjects » Regulatory documents of St. Petersburg »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 2 Protection and protection of surface water bodies » 2.3 Water use » 2.3.2 Requirements for use of water bodies for domestic, drinking and public water use »


The Document is Replaced With:

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

The Document References:

Code 190-FZ: Town Planning Code of the Russian Federation

Federal Law 184-FZ: About technical regulation

Federal Law 190-FZ: About heat supply

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 416-FZ: About water supply and sanitation

Federal Law 69-FZ: Fire Safety

Federal Law 7-FZ: Environmental Protection

GOST 10006-80: Metal pipes

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10708-82: Pendulum impact machines

GOST 11262-80: Plastics. Tensile strength test method.

GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements

GOST 12.3.005-75: Painting works

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16310-80: Welded joints of polyethylene, polypropylene and polyvinyl chloride. Main types, design elements and dimensions

GOST 166-89: Vernier callipers. Specifications

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 20426-82: Radiation methods of defectoscopy

GOST 21.110-2013: System of design documents for construction. Specification of equipment, products and materials

GOST 21.110-95: System of building design documents Rules of developing specifications for equipment, products and materials

GOST 21.604-82: System of building design documents. Water supply and sewerage. Outside networks. Working drawings

GOST 21.704-2011: System of design documents for construction. Rules for execution of working documentation of outside networks of water supply and sewerage

GOST 23049-78: Non-destructive check. Ultrasonic flaw detectors. General technical requirements

GOST 23667-85: Non-Destructive Testing Ultrasonic Flaw Detectors Methods for Measuring the Main Parameters

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 24297-87: Input inspection of products. General provisions.

GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures

GOST 25.603-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures

GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures

GOST 27077-86: Thermoplastic fitting. Methods of determination of the fittings appearance alteration after heating

GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 3845-75: Metallic tubes. Hydraulic pressure testing method

GOST 4648-2014: Plastics. Method of static bending test

GOST 4648-71: Plastics. Method of static bending test

GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents

GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications

GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches

GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications

GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R ISO 12176-1-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion

GOST R ISO 12176-2-2011: Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 2. Electrofusion

GOST R ISO 2531-2008: Ductile iron pipes, fittings, accessories and their joints for water or gas applications. Specifications

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

Manual for SN 550-82: Manual for the design of technological pipelines from plastic pipes

PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 11-05-2007: Instruction On Keeping Construction Log Book

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

RD 34.23.601-96: Recommendations for the repair and safe operation of metal and reinforced concrete tanks for storing fuel oil

Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services

Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content

RMD 11-08-2009 SPb: Guidelines for preparation of capital construction projects in St. Petersburg City

RMD 11-08-2009 St. Petersburg: Guide to the design preparation of capital construction in St. Petersburg

RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

SanPiN 2.1.4.1175-02: Hygienic requirements for water quality of centralized water supply. Sanitary protection of sources

SN 550-82: Specification for plastic process pipeline design

SP 24.13330.2011: Pile foundations

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants

SP 33.13330.2012: Steel pipelines strength analysis

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80

SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 45.13330.2012: Earth structures, bases and foundations

SP 48.13330.2011: Organization of construction

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

TR 170-05: Technical recommendations for the design and construction of underground drainage networks of non-pressure polyethylene pipes with a double-layer wall

TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg

TSN 30-306-2002: Reconstruction and development of historically developed areas of St. Petersburg

TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment

TSN 50-302-2004: Designing the foundations of buildings and structures in St. Petersburg

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!