SP 33-101-2003
СП 33-101-2003
|
|
Determination of design hydrological performance
Определение основных расчетных гидрологических характеристик
Status: Effective
The set of rules establishes general provisions and requirements for the organization and procedure for carrying out engineering hydrological calculations for determining hydrological characteristics to justify the design of new, expansion, reconstruction and technical re-equipment of existing enterprises, buildings and structures for all types of construction and engineering protection of territories. The provisions of the Code of Practice do not apply to the determination of the calculated hydrological characteristics during surveys and design of objects located on the sections of rivers located in the zone of influence of tidal waters, as well as on mud-prone rivers.
Свод правил устанавливает общие положения и требования к организации и порядку проведения инженерных гидрологических расчетов по определению гидрологических характеристик для обоснования проектирования новых, расширения, реконструкции и технического перевооружения действующих предприятий, зданий и сооружений для всех видов строительства и инженерной защиты территорий. Положения Свода правил не распространяются на определене расчетных гидрологических характеристик при изысканиях и проектировании объектов, расположенных на участках рек, находящихся в зоне влияния морских приливов, а также на селеопасных реках.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
12/26/2003
SKU: RUSS143885
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
17.120.01 Measurement of parameters of fluid flow in general »
As a Replacement Of:
SNiP 2.01.14-83: Determination of design hydrologic characteristics
The Document References:
GOST 19179-73: Hydrology of land. Terms and definitions
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 2.01.14-83: Determination of design hydrologic characteristics
SNiP 33-01-2003: Hydraulic engineering constructions. Basic principles of designing
SP 11-103-97: Code of practice. Engineering hydrometeorological survey for construction
The Document is Referenced By:
GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification
GOST R 55260.4.1-2013: Hydro power plants. Part 4-1. Hydroelectric power plants. The technological part hydroelectric power plants and pumped storage plants. General specifications
GOST R 58283-2018: Oil and gas industry. Arctic operations. Accounting for ice loads in the design of offshore platforms
GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards
MRR 3.2.64-01-16: Collection of basic prices for design work on flow-type sewage treatment plants carried out with the involvement of funds from the budget of the city of Moscow
MSN 33-01-2011: Hydraulic Structures. Basic statements
NTP 1.30.03.01-06: Norms of technological design of irrigation systems using livestock runoff
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.036-2013: Guidelines for the design, repair, maintenance and operation of ferries and floating bridges
ODM 218.2.049-2015: Recommendations for the design and construction of gabion structures on highways
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.082-2017: Guidelines for conducting hydraulic calculations of small ISSO on roads
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
ODM 218.5.003-2010: Recommendations for the use of geosynthetic materials in the construction and repair of roads
ODM 218.6.034-2019: Recommendations for designing motorway backups on approaches to large cities
PNST 765-2022: Security in emergency situations. Safe City. Flood forecasting. General requirements
R 52.08.874-2018: Determination of hydrographic characteristics by cartographic method
R 52.24.765-2012: Method of calculating the cost of work on the review of draft standards for permissible discharges of substances into water bodies and the preparation of certificates of the design characteristics of watercourses
R 52.24.765-2018: Methodology for calculating the cost of the preparation of certificates of design characteristics used to establish standards for permissible discharges of substances into water bodies
RD 52.24.622-2017: Procedure for calculating reference background concentrations of chemicals in water of water bodies in order to establish allowable waste water discharge standards
RD 52.24.622-2019: The procedure for calculating the conditional background concentrations of chemicals in the water of water bodies to establish standards for permissible wastewater discharges
SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions
SNiP 33-01-2003: Hydraulic engineering constructions. Basic principles of designing
SO 34.21.204-2005: Recommendations on the forecast of channel transformation in the downstream of waterworks
SP 100.13330.2016: The reclamation systems and construction
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 116.13330.2011: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 119.13330.2012: Railways of 1520 mm
SP 119.13330.2017: Railways with 1520 mm track
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction
SP 32-105-2004: Subways
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 350.1326000.2018: Norms for technological design of sea ports
SP 37.13330.2012: Industrial transport
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone
SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules
SP 447.1325800.2019: Railways in permafrost areas. Design Fundamentals
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
SP 482.1325800.2020: Engineering and hydrometeorological surveys for construction. General rules for the production of work
SP 58.13330.2012: Hydraulic Structures. Basic statements
STO GGI 52.08.40-2017: Determination of the morphometric characteristics of land water bodies and their watersheds using the technology of geographical information systems using digital maps of the Russian Federation and satellite images
STO GGI 52.08.41-2017: The main hydrological characteristics with non-stationary time series due to the influence of climatic factors. Calculation Recommendations
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
