VSN 34-91/MT-st
ВСН 34-91/МТ-ст
|
|
Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
Правила производства и приемки работ на строительстве новых, реконструкции и расширении действующих гидротехнических морских и речных транспортных сооружений. Часть III
Status: Effective
The rules must be observed in the production and acceptance of works on the construction, reconstruction or expansion of sea and river port and shore protection hydraulic structures, as well as hydraulic structures of shipbuilding and ship repair enterprises. Production and acceptance of these works in special conditions (seismic areas, in the zone of distribution of subsiding soils) must be performed in compliance with the requirements of the relevant chapters of building codes and other All-Union regulatory documents, which are valid for work in these conditions.
Правила необходимо соблюдать при производстве и приемке работ по строительству, реконструкции или расширению морских и речных портовых и берегозащитных гидротехнических сооружений, а также гидротехнических сооружений судостроительных и судоремонтных предприятий. Производство и приемка указанных работ в особых условиях (сейсмических районах, в зоне распространения просадочных грунтов) должны выполняться с соблюдением требований соответствующих глав строительных норм и правил и других общесоюзных нормативных документов, действие которых распространяется на работы в этих условиях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Transport Construction of the USSR,
11/1/1991
SKU: RUSS144379
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
18. Retaining walls and other special structures and types of work »
18.6. Sea and river transport facilities (moorings, embankments) »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of hydraulic structures »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Assembly devices »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.4 Hydraulic structures of water facilities industry »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.140 Construction of waterways, ports and dams »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
As a Replacement Of:
VSN 6/118-74: Minmorflot, Mintransstroy Instructions on ensuring the durability of concrete and reinforced concrete structures of offshore hydraulic structures
The Document References:
GOST 10060-87: Concretes. Methods of frost resistance determination
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10268-80: Heavy concrete. Technical requirements for fillers
GOST 10922-75: Reinforcement products and embedded parts, welded for reinforced concrete structures. Requirements and test methods
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.1.004-85: Occupational safety standards system. Fire safety. General requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.035-78: Occupational safety standards system. Diving equipment and means for providing diving trips and works. General safety requirements
GOST 12.3.012-77: Occupational safety standards system. Diving works. General safety requirements
GOST 12071-84: Soils. Sampling, packing, transportation and keeping of samples
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12801-84: Asphaltic concrete mixtures for roads and airdromes, tar concrete mixtures for roads, asphaltic concrete and tar concrete. Methods of testing
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 14098-85: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, construction and dimensions
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17343-83: Universal single-bucket excavators with flexible suspension of working attachment
GOST 1779-83: Asbestos cord
GOST 19804.0-78: Piles driven of reinforced concrete. General specifications
GOST 19804.2-79: Prestressed reinforced-concrete driven square piles. Structure and dimensions
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19912-81: Soils. Field test method by dynamic sounding
GOST 20069-81: Soils. Field test method by static sounding
GOST 20425-75: Concrete Tetrapod for Costal Protecting Installations
GOST 21719-80: Soils. In-situ methods of shearing test in boreholes and in massive
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22236-85: Cements. Rules of acceptance
GOST 22245-76: Viscous petroleum road bitumens. Specification
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 22827-85: General purpose self-propelled boom cranes
GOST 22894-77: Universal single-bucket hydraulically driven excavators. Technical conditions
GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 25100-82: Soils. Classifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 310.1-76: Cements. Test methods
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 380-88: Common quality carbon steel. Grades
GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 5382-73: Cements. Chemical testing methods
GOST 5686-78: Piles. Field test methods
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7410-79: Caterpillar bulldozers. Specification
GOST 8267-82: Crushed stone made from natural stone for construction works. Specification
GOST 8268-82: Gravel for construction work
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications
GOST 8736-85: Sand for construction work. Technical requirements
GOST 9.402-80: Metal surface preparation for painting
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
RD 31.31.23-81: Guide to Design of Narrow Cast-in-Place Piers and Mooring Posts for Arctic Conditions
RD 31.35.10-86: Port facilities and aquatic areas operation rules
RD 31.74.04-79: Technology surveying works in the production of dredging.
SanPiN 4631-88: Sanitary rules and standards for preservation of coastal sea water against pollution in areas of water use by population
SN 423-71: Guidelines for the Determining Return on Capital Investments in Construction
SN 509-78: Guidelines for Determination of Return on Investment from the Use of New Technologies, Inventions, and Innovations in Construction
SNiP 1.01.02-83: System of normative documents in construction. The procedure for the development and approval of regulatory documents
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.02.03-85: Pile foundations
SNiP 2.03.01-84: Concrete and reinforced concrete structures
SNiP 2.06.01-86: Hydraulic facilities. basic provisions of design activities
SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.01-87: Insulation and finishing coatings
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.05.06-85: Electrical devices
SNiP 3.06.03-85: Automobile roads
SNiP 3.07.01-85: Hydraulic engineering river constructions
SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP II-18-76: Foundations and foundations on permafrost soils. Design Standards
SNiP III-10-75: Regulations for execution and acceptance of works. Site Improvement
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
VSN 139-80: Construction Guidelines for Cement Concrete Road Pavements
VSN 5-84/MMF: Application of natural stones in sea hydrotechnical construction
VSN 6/118-74: Minmorflot, Mintransstroy Instructions on ensuring the durability of concrete and reinforced concrete structures of offshore hydraulic structures
VSN 94-77: Railway Track Construction Guidelines
The Document is Referenced By:
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
Order 217/pr/124: On the recognition as invalid and not valid on the territory of the Russian Federation of some acts and documents issued by the central government bodies of the RSFSR and the USSR in the field of construction
RD 34.03.215: Safety instructions for excavation work using the hydromechanization method at the facilities of the USSR Ministry of Energy
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
