Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods
Правила производства и приемки работ по герметизации стыков и отверстий сборной тоннельной обделки при закрытом способе строительства
Status: Effective
The rules establish general requirements for the production and acceptance of works on the sealing of joints, bolted joints, mounting holes and holes for the injection of precast cast iron and reinforced concrete lining of subway tunnels and transport tunnels constructed by the closed method, with the expected hydrostatic pressure of groundwater to 0.5 MPa for cast iron and up to 0.15 MPa for reinforced concrete lining. With an expected pressure of more than 0.5 MPa, sealing issues should be reflected in a special section of the project.
Правила устанавливают общие требования к производству и приемке работ по герметизации стыков, болтовых соединений, монтажных отверстий и отверстий для нагнетания сборной чугунной и железобетонной обделок тоннелей метрополитенов и транспортных тоннелей, сооружаемых закрытым способом, при ожидаемом гидростатическом давлении грунтовых вод до 0,5 МПа для чугунных и до 0,15 МПа для железобетонных обделок. При ожидаемом давлении более 0,5 МПа вопросы герметизации должны быть отражены в специальном разделе проекта.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Corporation Transstroy,
3/23/1992
SKU: RUSS144380
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of tunnels and subways »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.060 Tunnel construction »
As a Replacement Of:
VSN 130-66: Technical guidelines for waterproofing the joints of injection ports and bolt holes in the precast concrete lining of tunnels, subways constructed by the closed method
VSN 149-68: Technical guidelines for waterproofing the joints of the team lining of metro tunnels with a quick-set BEAD sealant
The Document References:
GOST 10296-79: Isol-hydroinsulating material. Specifications
GOST 10597-87: Painting brishes. Specifications
GOST 12.4.010-75: Means of individual protection protective mittens
GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications
GOST 12302-83: Bags made of polymeric and composite materials. General specifications
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 18578-89: Builders axes. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 5802-86: Mortars. Test methods.
GOST 6617-76: Petroleum construction bitumen
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.04.01-87: Insulation and finishing coatings
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
VSN 127-91: Dewatering Planning and Execution Guidelines for Subsurface Water Removal to Permit Tunnel and Subway Construction
VSN 132-92: Execution and Acceptance Requirements for Injection Grouting Behind Tunnel Liner
VSN 149-68: Technical guidelines for waterproofing the joints of the team lining of metro tunnels with a quick-set BEAD sealant
VSN 189-78: Guidelines for Planning and Execution of Artificial Soil Freezing Used in Subway and Tunnel Construction
The Document is Referenced By:
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
Manual AV-22-r: Guidelines for technical diagnostics of road tunnels
ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
