RD 34.35.618
РД 34.35.618
|
|
Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
Взрывозащищенные показывающие электроконтактные манометры типа ВЭ-16рб. Руководство по капитальному ремонту
Status: Effective
The manual can be used in the current repair of devices, as well as in preparing them for periodic departmental or state calibration.
Руководство может быть использовано при текущем ремонте приборов, а также при подготовке их к периодической ведомственной или государственной поверке.
Choose Language:
Format: Electronic (pdf/doc)
Approved: VPO Soyuzenergoremont,
11/10/1987
SKU: RUSS144404
The Product is Contained in the Following Classifiers:
Power Industry »
35. Automation, protection, interlocks, measuring instruments (including IIS ACS TP) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.100 Measurement of force, weight and pressure »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.01 Switchgear and control equipment in general »
The Document References:
GOST 1.25-76: State system of standardization. Metrological assurance. General
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1051-73: Calibrated quality steel
GOST 1066-90: Brass wire
GOST 10905-86: Surface plates and face-plates. Specifications
GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 12997-84: SSI Products. General specifications
GOST 13717-84: Pressure-operated indicating electrical-contact instruments
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 14192-77: Marking of cargoes
GOST 14809-69: No-go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions
GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions
GOST 1491-80: Cheese-head screws. Product grades A and B. Construction and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types
GOST 16337-77: High-pressure polyethylene. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17308-88: Twines. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18251-87: Gummed tape on paper substrate. Specifications
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 2.602-68: Unified system for design documentation. Repair documents
GOST 21930-76: Tin-lead solders in pigs. Specifications
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23706-79: Ohmmeters. General specifications
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 25706-83: Magnifiers
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 2930-62: Measuring instruments. Characters and signs
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7222-75: Wire of gold, silver and their alloys
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 7935-74: General-purpose homological oils. Specifications
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8273-75: Packing paper
GOST 8291-83: Back pressure piston gages
GOST 8560-78: Calibrated hexahedral rolled stock
GOST 882-75: Probes. Specification
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9.402-80: Metal surface preparation for painting
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 9359-80: Urea-formaldehyde and melamine-formaldehyde moulding materials (aminoplasts). Specifications
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
GOST 9389-75: Carbon steel spring wire
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
MI 925-85: State system for ensuring uniformity of measurements. Pressure gauges, vacuum gauges and vacuum gauges showing and recording. Method of verification
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
The Document is Referenced By:
RD 34.01.201-90: Index of Minenergo USSR Guidelines Applying to Hot Water Boilers at Cogeneration Plants and District Hot Water Boiler Plants for Piped Heat Supply Networks (as of 07/01/90)
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.