TSN 50-304-2000
ТСН 50-304-2000
|
|
Foundation Beds, Foundations, and Underground Structures
Основания, фундаменты и подземные сооружения. г. Москва
Status: Not effective - Superseded
The standards apply to the design of foundations and foundations of newly constructed and reconstructed buildings and structures and underground structures.
Нормы распространяются на проектирование оснований и фундаментов вновь строящихся и реконструируемых зданий и сооружений и подземных сооружений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: The government of Moscow,
2/10/1998
SKU: RUSS144655
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
15. Supports, foundations and foundations of artificial structures »
15.1. Support design and construction documents »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.50 Foundations and foundations of buildings and structures »
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of Moscow »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.45 Foundations »
The Document is Replaced With:
TSN 50-304-2001: Basements, foundations, and underground constructions
The Document References:
GOST 12071-84: Soils. Sampling, packing, transportation and keeping of samples
GOST 12248-96: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 19912-81: Soils. Field test method by dynamic sounding
GOST 20069-81: Soils. Field test method by static sounding
GOST 20276-85: Soils. Field methods for determining deformation characteristics
GOST 20522-96: Soils. Statistical treatment of the test results
GOST 21719-80: Soils. In-situ methods of shearing test in boreholes and in massive
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23161-78: Soils. Laboratory method for determination of subsiding characteristics
GOST 23278-78: Soils. Fields methods of permeability tests
GOST 23462-95: Production of mixed fodder industry
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 23741-79: Soils. In-situ methods of shearing test mine openings
GOST 24143-80: Soils. Laboratory methods for determination of swelling and shrinking characteristics.
GOST 24846-81: Soils. Measuring methods of strains of structures and buildings bases
GOST 24847-81: Soils. Determination methods of seasonable depth of freezing
GOST 24942-81: Soils. Test methods by standard pile
GOST 25100-95: Soils. Classification
GOST 25260-82: Rocks. Field test method by penetration logging
GOST 25358-82: Soils. Field method of determining temperature
GOST 25584-90: Soils. Laboratory methods for determination of filtration factor
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 28514-90: Construction geotechnics. Determination of soil density by volume displacement method
GOST 28622-90: Soils. Laboratory method for determination of frost-heave degree
GOST 30416-96: Soils. Laboratory testing. General requirements
GOST 5180-84: Soils. Laboratory methods for determination
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
MGSN 2.02-97: Allowable levels of ionizing radiation and radon at the construction sites
SN 477-75: Interim Design Guidelines for Foundation Walls and Retaining Walls Constructed as Diaphragm Walls
SNiP 1.02.07-87: Engineering Research for Construction
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design
SNiP 2.02.03-85: Pile foundations
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices
SNiP 2.06.09-84: Hydrotechnical tunnels
SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.06.04-91: Bridges and pipes
SNiP II-25-80: Wood constructions
SNiP II-44-78: Railway Tunnels and Highway Tunnels
SNiP II-94-80: Underground headings.
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
VSN 358-76: Guidelines for Pile Driving Near Buildings and Structures
VSN 490-87: Design and Installation of Pile Foundations and Sheet Pile Retaining Walls for Industrial Facility Rehabilitation and Urban Development
The Document is Referenced By:
Manual: Manual for impulse and low consumption fire extinguishing systems
MDS 11-21.2009: Method of determination of exact location and depth, as well as ruptures of underground utilities (power, signal cables, pipelines, gas, water, etc.) to prevent their damage during excavation
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 13-22.2009: Methods of geodetic monitoring of the technical condition of high-rise buildings and unique buildings and structures
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TSN 21-301-2001: Passenger Motor Vehicle Parking Facilities
TSN 50-304-2001: Basements, foundations, and underground constructions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.