RD 34.35.606
РД 34.35.606
|
|
General Guide to Overhaul of Thermal Automation and Measuring Equipment
Общее руководство по капитальному ремонту средств тепловой автоматики и измерений
Status: Effective
This Guide is one of the regulatory and technical repair documents and is intended to streamline the repair of TAI tools at enterprises of the USSR Ministry of Energy.
Настоящее Руководство является одним из нормативно-технических ремонтных документов и предназначается для упорядочения ремонта средств ТАИ на предприятиях Минэнерго СССР.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Ministry of Energy,
3/24/1987
SKU: RUSS144822
The Product is Contained in the Following Classifiers:
Power Industry »
35. Automation, protection, interlocks, measuring instruments (including IIS ACS TP) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.17 Safety requirements for repair work »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.010 Energy and heat engineering in general »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.01 Switchgear and control equipment in general »
The Document References:
GOST 10587-84: Uncured epoxy resins. Specifications
GOST 10597-87: Painting brishes. Specifications
GOST 10-88: Inside micrometers. Specifications
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 1277-75: Reagents. Silver nitrate. Specifications
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12997-84: SSI Products. General specifications
GOST 13837-79: General purpose dynamometers
GOST 14192-77: Marking of cargoes
GOST 14809-69: No-go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions
GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16422-79: Transmission grease ЦИАТИМ-208. Specifications
GOST 16631-80: Square punches. Construction and dimensions
GOST 166-89: Vernier callipers. Specifications
GOST 16962-71: Electronic and electrical equipment. Mechanical and climatic influence. Requirements and test methods
GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18179-72: Grease OKБ-122-7. Specifications
GOST 18355-73: Plain single-ended double-limit snap gauges for length over 10 to 360 mm. Design and dimensions
GOST 18604.0-83: Bipolar transistors. General requirements for measuring of electrical parameters
GOST 18604.10-76: Transistors bipolar. Input resistance measurement technique
GOST 18604.1-80: Transistors bipolar. Method for measuring collector-to base time constant at high frequencies
GOST 18604.3-80: Transistors bipolar. Methods for measuring collector and emitter capacitances
GOST 18604.4-74: Transistors. Method for measuring collector reverse current
GOST 18604.5-74: Transistors. Method for measuring collector-emitter reverse current
GOST 18604.6-74: Transistors. Method for measuring emitter reverse current
GOST 18604.7-74: Transistors. Method for measuring current transfer coefficient
GOST 18604.8-74: Transistors. Method for measuring output conductivity
GOST 18604.9-82: Transistors bipolar. Methods for determining cut-off frequency and transition frequency
GOST 18986.16-72: Rectifier diodes. Methods of measuring average forward voltage and average reverse current
GOST 18986.1-73: Semiconductor diodes. Method for measuring direct reverse current
GOST 18986.3-73: Semiconductor diodes. Method of measuring of direct forward voltage and direct forward current
GOST 19113-84: Pine common rosin
GOST 19672-74: Cylindrical worm gear pairs. Modules and coefficients of worm diameter
GOST 20458-89: Grease Torsiol-55. Specifications
GOST 21150-87: Litol-24 grease
GOST 21240-89: Medical scalpels and knives
GOST 21342.0-75: Resistors. General requirements at measuring of electrical parameters
GOST 21342.19-78: Resistors. Methods of measuring noise level
GOST 21342.20-78: Resistors. Method of measuring resistance
GOST 21342.3-87: Variable resistors. Test methods for resistance law
GOST 21342.7-76: Thermal resistors. Method of measuring resistance
GOST 21342.8-76: Thermal resistors. Method of measuring resistance temperature coefficient
GOST 21743-76: Aviation oils
GOST 2185-66: Spur gears. Basic parameters
GOST 21931-76: Tin-lead solders in the form of products. Specifications
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23706-79: Ohmmeters. General specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 24121-80: Keyway gauges for dimensions over 3 to 50 mm. Design and dimensions
GOST 24810-81: Rolling bearings. Clearances
GOST 25129-82: Primer GF-031. Specifications
GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications
GOST 25706-83: Magnifiers
GOST 2712-75: Grease АМС. Specifications
GOST 2768-84: Acetone technical. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2-85: Ammonium nitrate
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5208-81: Technical normal butyl alcohol. Specifications
GOST 5494-71: Pegmentary aluminium powder
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 610-72: Oils for axle journals. Specifications
GOST 6456-82: Abrasive paper
GOST 6507-90: Micrometers. Specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.305-78: State system for ensuring the uniformity of measurements. Manometric thermometers. Methods and means of calibration
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8026-92: Levelling rules. Specifications
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 8728-88: Plasticizers. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.402-80: Metal surface preparation for painting
GOST 901-78: Bakelite lacquers. Specifications
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
GOST 9433-80: Grease ЦИАТИМ-221. Specifications
GOST 9569-79: Paraffin paper
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9762-76: Grease МС-70. Specifications
The Document is Referenced By:
RD 34.01.201-90: Index of Minenergo USSR Guidelines Applying to Hot Water Boilers at Cogeneration Plants and District Hot Water Boiler Plants for Piped Heat Supply Networks (as of 07/01/90)
RD 34.35.602-81: Guidelines for the overhaul of semiconductor amplifiers of types U and UPD
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.