RK 34-38-025-87
РК 34-38-025-87
|
|
Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
Руководство по капитальному ремонту показывающих манометров для точных измерений типа МТИ
Status: Effective
Guidelines for the overhaul of indicating manometers for accurate measurements of the MTI type produced by the Moscow Production Association Manometer are the main technical document, the requirements of which are mandatory for enterprises of the USSR Ministry of Energy that carry out an overhaul of instruments of the specified type.
Руководство по капитальному ремонту показывающих манометров для точных измерений типа МТИ производства Московского производственного объединения "Манометр" является основным техническим документом, требования которого обязательны для предприятий Минэнерго СССР, выполняющих капитальный ремонт приборов указанного типа.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Ministry of Energy,
12/15/1987
SKU: RUSS145008
The Product is Contained in the Following Classifiers:
Power industry »
35. Automation, protection, interlocks, measuring instruments (including IIS ACS TP) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.100 Measurement of force, weight and pressure »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.30 Boilers and heat exchangers »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.01 Switchgear and control equipment in general »
The Document References:
GOST 1.25-76: State system of standardization. Metrological assurance. General
GOST 10197-70: Stands and supports for measuring heads. Specifications
GOST 1066-90: Brass wire
GOST 10905-86: Surface plates and face-plates. Specifications
GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 14192-77: Marking of cargoes
GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods
GOST 14809-69: No-go plain plug gauges with inserts of diameter from 1 to 6 mm. Design and dimensions
GOST 14810-69: Plain double-end plug gauges with inserts of diameter over 3 to 50 mm. Design and dimensions
GOST 14955-77: Quality round steel with a special surface finish
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types
GOST 17308-88: Twines. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 1805-76: Apparatus oil МВП. Specifications
GOST 18251-87: Gummed tape on paper substrate. Specifications
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 2.602-68: Unified system for design documentation. Repair documents
GOST 2060-2006: Brass rods. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21930-76: Tin-lead solders in pigs. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 25706-83: Magnifiers
GOST 2930-62: Measuring instruments. Characters and signs
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3266-81: Machine and hand taps. Design and dimensions
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 5221-77: Tin-zinc bronze wire
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6456-82: Abrasive paper
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7935-74: General-purpose homological oils. Specifications
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8273-75: Packing paper
GOST 8291-83: Back pressure piston gages
GOST 882-75: Probes. Specification
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9045-80: Low carbon cold-rolled quality steel sheets for cold stamping. Specifications
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9178-81: Basic requirements for interchangeability. Cylindrical fine-pitch gears. Tolerances
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 931-90: Brass sheets and strips. Specifications
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
GOST 9389-75: Carbon steel spring wire
GOST 9587-81: Basic requirements for interchangeability. Gears. Basic rack of cogged fine module gears
GOST 9740-71: Circular screw dies. Specifications
MI 925-85: State system for ensuring uniformity of measurements. Pressure gauges, vacuum gauges and vacuum gauges showing and recording. Method of verification
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.