RD 34.26.203
РД 34.26.203
|
|
Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
Инструкция по производству обмуровочных работ при монтаже котельных и энерготехнологических установок. Том 1
Status: Effective
The instruction is a normative-technical document for the production of tiling work when installing steam boilers with a steam output of 2.5 to 3950 tons
Инструкция является нормативно-техническим документом для производства обмуровочных работ при монтаже паровых котлов паропроизводительностью от 2,5 до 3950 т/ч, водогрейных тепловой мощностью от 10 Гкал/ч и более, а также энерготехнологических установок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: VPSMO Soyuzenergosashchita,
6/15/1981
SKU: RUSS145056
The Product is Contained in the Following Classifiers:
Power industry »
26. Boiler plants »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of energy facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
3 Energy security »
3.3 Requirements for order of work on thermal power plants and heat networks »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.13 Operation of power plants and heat networks »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.01 Burners and boilers in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
The Document References:
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10153-70: High refractory silicon carbide products. Specifications
GOST 10178-62: Portland cement slag, pozzolanic Portland cement and their varieties
GOST 10178-76: Portland cement and slag Portland cement. Specification
GOST 10181.0-81: Concrete mixtures. General requirement to test methods
GOST 10181-2000: Concrete Mixtures Test method
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10277-90: Putties. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 10396-84: Crepe cable paper
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1051-73: Calibrated quality steel
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10678-76: Thermal orthophosphoric acid. Specifications
GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 10950-78: Sawn timber and semi-manufactures. Antiseptic methods of immersion
GOST 10994-74: Precision alloys. Grades.
GOST 1133-71: Forged round and square steel. Dimensions
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications
GOST 12.4.089-86: Occupational safety standards system. Building. Safety belts. General technical specifications
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 1216-87: Magnesite caustic powder. Specifications
GOST 12271-76: The copolymers of styrene. Specifications
GOST 12865-67: Expanded vermiculits.
GOST 12871-93: Chrysotile asbestos - chrysotile. General specifications
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 13079-81: Sodium silicate soluble. Technical conditions
GOST 13493-86: Sodium tripolyphosphate. Technical conditions
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 13950-91: Welded and folded steel barrels
GOST 1412-85: Flakish graphite cast iron
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16109-70: Carnallite enriched. Technical conditions
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17308-88: Twines. Specifications
GOST 1779-83: Asbestos cord
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 18051-83: Wooden containers for heat-insulating materials and products
GOST 18143-72: Corrosion resistant
GOST 18343-80: Pallets for bricks and hollow clay tiles
GOST 18477-79: Universal containers
GOST 18501-73: Lifting-and-conveying machines. Conveyers, hoists, loaders and stackers. Terms and definitions
GOST 18690-82: Cables, wires, cord and armature. Marking, packing, carriage and storage
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19041-85: Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage
GOST 19170-2001: Fibre glass. Constructive woven fabrics. Specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 19667-74: Special-purpose group container of gross mass 5,0 th for piece-goods
GOST 19822-88: Industrial container. Specifications
GOST 20072-74: Heat-resistant steel
GOST 20910-90: Refractory concretes. Specifications
GOST 21029-75: Aluminum barrels for chemical products
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 21880-94: Thermo insulating mineral wool broached mats. Specifications
GOST 2210-73: Ammonium chloride technical. Technical conditions
GOST 22237-85: Cements. Packing, labelling, transport and storage
GOST 2226-88: Paper bags
GOST 2228-81: Paper for bags
GOST 2246-70: Welding steel wire. Specifications
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 23037-78: Unshaped refractories. Aggregates for concrete articles, masses, mixtures, coatings and mortars. Specifications
GOST 23619-79: Refractory heat-insulating mullite-silica glass-fibrous materials and products. Specifications
GOST 23779-79: Asbestos paper. Specifications
GOST 2409-95: Refractories. Method for determination of bulk density apparent and true porosity, water absorption
GOST 24454-80: Sawn timbers of coniferous species
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24717-2004: Refractories and refractory raw materials. Marking, packing, transportation and storage
GOST 24717-81: Refractory materials and products. Marking, packing, transportation and storage
GOST 24748-81: Heat insulation lime-siliceous products. Specification
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 2551-75: Roll roofing and hydroinsulating materials. Packing, marking, storage and transportation
GOST 25880-83: Heat insulating construction materials and products. Packing, marking, transportation and storage
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 26327-84: Silicon carbide grinding materials
GOST 2642.1-86: Refractories and refractory raw materials. Method for the determination of hygroscopic moisture
GOST 2642.2-86: Refractories and refractory raw materials. Methods for the determination of mass change ignition
GOST 2642.3-97: Refractories and refractory raw materials. Methods for the determination of silicon (IV) oxide
GOST 2694-78: Foamed diatomite and diatomite thermo insulating products. Technical requirements
GOST 2697-83: Roofing asphalt felt. Specifications
GOST 27436-87: Internal noise of motor vehicles. Permissible level and methods of measurement
GOST 2771-81: Cold-drawn round wire. Gauge
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2850-80: Asbestos millboard. Specifications
GOST 2912-79: Chrome oxide technical. Technical conditions
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3135-82: Roofing felt
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3306-88: Square mesh screens made of corrugated steel wire
GOST 3560-73: Sealing tepe
GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods
GOST 3808.1-80: Lumber from softwood
GOST 380-94: Normal quality carbon steel
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 3885-73: Reagents and superpure substances. Regulations of acceptance, sampling, packing, marking, transportation and storage
GOST 390-83: General-purpose refractory fire-slay articles
GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications
GOST 4071-80: Refractory articles. The determination of cold crushing strength
GOST 4108-72: Reagents. Barium chloride, 2-aqueous. Specifications
GOST 4147-74: Reagents. Ferric chloride hexahydrate. Specifications
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 4640-93: Mineral wool. Specifications
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications
GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications
GOST 5044-79: Thin-walled steel drums for chemical products
GOST 515-77: Bitumized and tarred packaging paper
GOST 5279-74: Crystal graphite for foundry purposes. Specifications
GOST 530-80: Glay ordinary brick
GOST 5336-80: Single woven steel grids
GOST 5341-69: Fireclay refractories for linings of steel-teeming ladles. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 6024-75: Refractory silica and fireclay articles for the openhearth brickwork. Form and dimensions
GOST 6102-94: Asbestos fabric
GOST 6137-80: Refractory aluminosilicate plasticized mortars. Specifications
GOST 6137-97: Refractory alumosilicate mortars. Specifications
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 6552-80: Reagents. Orthophosphoric acid. Specifications
GOST 6564-84: Lumbers and blanks
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7031-75: Quartzy sand for fine ceramics
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7377-85: Paper for corrugation
GOST 7417-75: Calibrated round steel
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 7494-87: Sakhalin coals for domestic needs. Specifications
GOST 7566-94: Metal products
GOST 7759-73: Magnesium chloride technical (bischofite). Technical conditions
GOST 7769-82: Alloyed cast iron for castings with special properties
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 8179-98: Refractory products. Sampling and acceptance testing
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 8273-75: Packing paper
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8559-75: Square bar steel. Products sizes
GOST 8560-78: Calibrated hexahedral rolled stock
GOST 8691-73: General-purpose refractory articles. Form and dimensions
GOST 8736-93: Sand for construction works. Specifications
GOST 8777-80: Tight and slack wooden barrels
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9078-84: Flat pallets
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9165-59: Canned meat. Ham
GOST 9179-77: Lime for building purposes. Specifications
GOST 9338-80: Plywood drums. Specifications
GOST 9369-77: Globoid gear pairs. Basic parameters
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9569-79: Paraffin paper
GOST 9573-82: Thermal insulating mates of mineral wool on synthetic binder. Specifications
GOST 9573-96: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST 969-91: Alumina and high alumina cements. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST 9758-86: Non-organic porous aggregates for construction work
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SN 482-76: Instructions for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures
SNiP III-24-75: Industrial Furnaces and Brick Smokestacks
ST SEV 1406-78: Concrete and reinforced concrete structures. Basic provisions in design
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.