Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities
Инструкция по монтажу пластмассовых трубопроводов на объектах Госагропрома СССР
Status: Not effective
The instruction has been developed to develop existing building codes and regulations, instructions and specifications for the production of billets, installation, delivery and acceptance of plastic pipelines at agricultural construction sites. The requirements of this Instruction should be fulfilled in the production and acceptance of works for the manufacture of billets and installation of pipelines with a diameter of up to 400 mm from polyethylene (low and high pressure - HDPE and LDPE, as well as from secondary polyethylene - PEV), polypropylene (PP) and polyvinyl chloride a) pipes.
Инструкция разработана в развитие действующих строительных норм и правил, инструкций и технических условий на производство работ по изготовлению трубных заготовок, монтажу, сдаче и приемке пластмассовых трубопроводов на объектах сельскохозяйственного строительства. Требования настоящей Инструкции должны выполняться при производстве и приемке работ по изготовлению трубных заготовок и монтажу трубопроводов диаметром до 400 мм из полиэтиленовых (низкого и высокого давления - ПНД и ПВД, а также из вторичного полиэтилена - ПЭВ), полипропиленовых (ПП) и поливинилхлоридных (ПВД) труб.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosagroprom of the USSR,
8/15/1986
SKU: RUSS145138
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design of agricultural enterprises »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.01 Agricultural machinery and equipment in general »
ISO classifier »
65 AGRICULTURE »
65.060 Agricultural machinery, accessories and equipment »
65.060.35 Irrigation and drainage equipment »
The Document is Replaced With:
OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia
The Document References:
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11371-78: Washers. Specifications
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 18599-83: Polyethylene pressure pipes
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 9065-75: Washers for flanged connection with medium temperature 0 to 650 °C. Types and general sizes
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
SN 478-80: Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 3.05.06-85: Electrical devices
The Document is Referenced By:
OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
