Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes
Инструкция по проектированию и монтажу сетей водоснабжения и канализации из пластмассовых труб
Status: Not effective - Superseded
Requirements Instructions should be followed in the design and installation of external and internal water supply and sewerage networks laid using plastic pipes with an outer diameter of up to 630 mm from low density polyethylene (PNP), high density polyethylene (PNP), polyvinyl chloride (PVC) and polypropylene (PP) . The instruction does not apply to the design of internal fire-fighting water supply and pipelines transporting abrasive media (sand, ash, slag). The manual describes the features of the design and installation of water and sewer networks of these plastic pipes with specific properties.
Требования Инструкции должны выполняться при проектировании и монтаже наружных и внутренних сетей водоснабжения и канализации, прокладываемых с применением пластмассовых труб наружным диаметром до 630 мм из полиэтилена низкой плотности (ПНП), полиэтилена высокой плотности (ПНП), поливинилхлорида (ПВХ) и полипропилена (ПП). Инструкция не распространяется на проектирование внутреннего противопожарного водопровода и трубопроводов, транспортирующих абразивные среды (песок, золу, шлак). В Инструкции приведены особенности проектирования и монтажа водопроводных и канализационных сетей из указанных пластмассовых труб, обладающих специфическими свойствами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/31/1980
SKU: RUSS145266
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
к.40 Water supply and sewerage »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Polymers »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.4 Requirements for protection of surface water bodies in implementation of activities »
2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.60 Water supply systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.80 Drainage Systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
The Document is Replaced With:
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
As a Replacement Of:
SN 478-75: Instructions for the design and installation of water supply networks and sewage from plastic pipes
The Document References:
GOST 11262-80: Plastics. Tensile strength test method.
GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 18599-83: Polyethylene pressure pipes
GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification
GOST 22689.1-89: Polyethylene waste-pipes and fittings.
Assortment
GOST 22689.2-89: Polyethylene waste-pipes
And related shaped parts. Construction
The Document is Referenced By:
B3-60: Recommendations for the hydraulic calculation of pipelines for cold, hot water and sewerage systems
Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas
Manual for SNiP 3.01.01-85: A guide to the development of projects for the organization of the construction of large industrial complexes using the nodal method
Manual for SNiP 3.01.01-85: A guide for the development of construction organization projects and civil works construction projects
Manual for SNiP 3.01.01-85: A guide for the organization of high-speed construction of roads and airfields using sets of machines of the DS-100 type
Manual for SNiP 3.01.01-85: Manual on the development of construction projects and agricultural production projects
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for the reconstruction of existing enterprises, buildings and structures. Reference manual to SNiP
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for industrial construction
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
RD 12.13.53-86: Guidelines for the design of the organization of the construction of the mine using electronic computers
SNiP 3.05.01-85: Indoor plumbing systems
SP 40-101-96: Design and installation of pipelines made of polypropylene "Random copolymer"
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
TR 95.08-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 08: Installation of Domestic Cold and Hot Water Supply Systems
VSN 003-88: Design and Installation Guidelines to Plastic Piping
VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings
VSN 201-88: Guidelines to Installation of Building Sanitary and Storm Drainage Systems Made of Polyvinyl Chloride Pipes in Residential and Public Buildings
VSN 20-95: Industry-Specific Building Code for the Design and Installation of Underground Sewer and Water Mains Made of Polyvinylchloride Pipes
VSN 212-85: Guidelines for Acceptance, Stockpiling, Storage, and Transportation of Main Building Materials and Products at Outfitting Depots and Outfitting Departments of Construction Organizations Administered by Glavmosstroy
VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems
VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities
VSN 415-81: General Specified Quantity Allowances for Building Materials. Compendium 19: Installation of Domestic Heating, Water Supply, Drainage, and Gas Supply Systems
VSN 47-96: Industry-Specific Building Code for the Design and Installation of Domestic Water Supply Systems Made of Polypropylene Random Copolymer (PPRC) Pipes
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
