Guidelines for the Fabrication of Cellular Concrete Products
Инструкция по изготовлению изделий из ячеистого бетона
Status: Effective
It is intended to guide the manufacture in the factory of reinforced and unreinforced products and structures of cellular concrete of all varieties.
Предназначена для руководства при изготовлении в заводских условиях армированных и неармированных изделий и конструкций из ячеистого бетона всех разновидностей.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
2/7/1980
SKU: RUSS145284
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
As a Replacement Of:
SN 277-70: Instructions on the technology of manufacturing products from cellular concrete
The Document References:
GOST 10086-77: Amplitude modulation factor meters. Types. General technical requirements
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10564-75: Synthetic latex CKC-65 ГП. Specifications
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11118-73: Autoclave cellular concrete panels for exterior walls of buildings. Technical requirements
GOST 12852.0-77: Cellular concrete. General requirements to test
GOST 12852.1-77: Cellular concrete. Method for the determination of compression strength
GOST 12852.2-77: Cellular concrete. Method for determination of moisture and bulk density
GOST 12852.3-77: Cellular concrete. Method for determining shrinkage upon drying
GOST 12852.4-77: Cellular concrete. Methods for the determination of frost-resistance
GOST 12852.6-77: Cellular concrete. Method of hygroscopic moisture determination
GOST 12871-93: Chrysotile asbestos - chrysotile. General specifications
GOST 13004-77: Polyethylsiloxane fluids. Specifications
GOST 13032-77: Polymethylsiloxane fluids. Specifications
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 1571-82: Turpentine oil
GOST 17057-89: Glass carpet-mosaic facing tiles and carpets from them. Specifications
GOST 17657-79: Data transmission. Terms and definitions
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19113-84: Pine common rosin
GOST 19570-74: Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements
GOST 19587-74: Hydrodynamic transmissions. Terms and definitions
GOST 20282-86: General-purpose polystyrene. Specifications
GOST 202-84: Zinc white
GOST 2067-93: Bone glue. Specifications
GOST 20833-75: Water-dispersion paints for exterior works. Specifications
GOST 2102-67: Dibutyl phthalate
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 22688-77: Lime for building purposes. Test methods
GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 310.1-76: Cements. Test methods
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3134-78: White spirit
GOST 3252-80: Hide glue. Specifications
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 4221-76: Reagents. Potassium carbonate. Specifications
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 4753-68: Lamp oil. Specification
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5100-85: Soda ash technical. Technical conditions
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 5494-71: Pegmentary aluminium powder
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 6617-76: Petroleum construction bitumen
GOST 6993-70: Enamels of perchlorovinyl grade HV-1100 of various colors
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 8268-82: Gravel for construction work
GOST 8273-75: Packing paper
GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
GOST 9179-77: Lime for building purposes. Specifications
GOST 9389-75: Carbon steel spring wire
GOST 9603-69: Foaming agent PO-6
GOST 965-89: Portland cements, white. Specification
GOST 9949-76: Coal xylene. Specifications
SN 277-70: Instructions on the technology of manufacturing products from cellular concrete
The Document is Referenced By:
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 19010-82: Concrete and reinforced concrete blocks for walls of buildings. General specifications
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II
RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
STO NAAG 3.1-2013: Designs using autoclaved aerated concrete in the construction of buildings and structures. Design and Construction Rules
TU 102-454-88: Expanded clay and concrete for building envelopes. Technical specifications
TU 34-4014-74: Fly ash of thermal power plants as an additive in concrete
VSN 06-77/USSR Minselstroy: Instructions for the manufacture of two-layer wall panels and blocks of lightweight concrete for agricultural buildings in series 1.832-5
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.