RTM 26-303-78
РТМ 26-303-78
|
|
Isothermic Tanks for Liquefied Hydrocarbon Gas. Standards and Calculation Methods
Изотермические резервуары для сжиженного углекислого газа. Нормы и методы расчета
Status: Effective - Introduced for the first time
The governing thermal material establishes norms and methods for calculating isothermal tanks intended for the storage and transportation of low-temperature liquefied carbon dioxide under pressure by road and rail. The methods and norms of calculation described in this RTM are applicable for horizontal isothermal tanks. RTM is recommended when calculating pressure up to 2.5 MPa.
Руководящий термический материал устанавливает нормы и методы расчета изотермических резервуаров, предназначенных для хранения и транспортирования автомобильным и железнодорожным транспортом низкотемпературного сжиженного углекислого газа под давлением. Методы и нормы расчета, изложенные в настоящем РТМ, применимы для горизонтальных изотермических резервуаров. РТМ рекомендуется применять при расчетах на давление до 2,5 МПа.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Ministry of Chemical and Petroleum Engineering,
12/26/1978
SKU: RUSS146056
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of chemical facilities »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
71.120.99 Other chemical industry equipment »
The Document References:
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 5-78: Constructive textile and asbestos laminates. Specification
The Document is Referenced By:
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials
RDM 929-02-93: Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials
RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials
RDM 929-04-93: Certificate of measurement of the mass fraction of manganese in carbon steels and unalloyed iron in the control of raw materials
RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials
RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials
RDM 929-07-93: Certificate for the method of measuring the mass fraction of manganese by the titrimetric method with a cobalt-copper catalyst in carbon steel in the control of raw materials and finished products
RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium
RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel
RDM 929-10-93: Certificate for the method of measuring the mass fraction of chromium in carbon steel in the control of raw materials and finished products
RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials
RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials
RDM 929-13-93: Certificate for the method of measuring the mass fraction of nickel in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials
RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products
RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products
RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products
RDM 929-22-93: Certificate for the method of measuring the mass fraction of cerium in carbon steel in the control of raw materials and finished products
RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.