imgalt

SP 86.13330.2014

СП 86.13330.2014

Main (Trunk) pipelines

Магистральные трубопроводы

Status: Effective

The set of rules establishes the basic requirements for the production and acceptance of construction and installation work during the construction and reconstruction of the linear part of trunk pipelines. The set of rules applies to the construction of new and reconstruction of the existing linear part of trunk pipelines and branches from them with a nominal diameter of up to 1,400 mm (inclusive) with an overpressure of not more than 10 MPa for transporting the following products: oil, oil products, natural and associated, natural and artificial hydrocarbon gases; liquefied hydrocarbon gases (C3 and C4 fractions and their mixtures), as well as unstable gasoline and unstable condensate and other liquefied hydrocarbons with the elasticity of saturated vapors not higher than 1.6 MPa (16 kgf

Свод правил устанавливает основные требования к производству и приемке строительно-монтажных работ при строительстве и реконструкции линейной части магистральных трубопроводов. Свод правил распространяется на строительство новых и реконструкцию действующей линейной части магистральных трубопроводов и ответвлений от них условным диаметром до 1400 мм (включительно) с избыточным давлением среды не свыше 10 Мпа для транспортирования следующих продуктов: нефти, нефтепродуктов, природного и попутного, естественного и искусственного углеводородных газов; сжиженных углеводородных газов (фракций С3 и С4 и их смесей), а также нестабильного бензина и нестабильного конденсата и других сжиженных углеводородов с упругостью насыщенных паров не выше 1,6 Мпа (16 кгс/см2) при температуре 45 градусов Цельсия. Не распространяется на строительство промысловых трубопроводов, а также строительство магистральных трубопроводов в морских акваториях.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of construction and housing and communal services of the Russian Federation, 2/18/2014

SKU: RUSS146354

Price: $2,583.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » K.34 Main and field pipelines »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Polymers »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.1 Strength calculations »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.4 For pipeline transport of oil and gas »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 2003.200.13 Pipelines and their components »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.040 Construction » 91.040.01 Construction in general »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.040 Construction » 91.040.01 Construction in general »


The Document is Replaced With:

SP 86.13330.2022: Trunk piping

As a Replacement Of:

SP 86.13330.2012: Main pipelines

The Document References:

Code 136-FZ: Land Code of the Russian Federation

Code 190-FZ: Town Planning Code of the Russian Federation

Code 200-FZ: Forest Code of the Russian Federation

Code 24-FZ: Code of Inland Water Transport of the Russian Federation

Code 74-FZ: Water Code of the Russian Federation

Federal Law 184-FZ: About technical regulation

Federal Law 257-FZ: On Roads and Road Activities in the Russian Federation and on Amending Certain Legislative Acts of the Russian Federation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 33-FZ: About Specially Protected Natural Areas

Federal Law 49-FZ: On the territories of traditional nature management of the indigenous peoples of the North, Siberia and the Far East of the Russian Federation

Federal Law 7-FZ: Environmental Protection

Federal Law 89-FZ: Production and Consumption Wastes

Federal Law 96-FZ: Atmospheric Protection

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.032-84: Occupational safety standards system. Electric installation works. General safety requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 15836-79: Bitumen-rubber insulating mastic. Specifications

GOST 17.2.3.02-2014: Regulations for establishing permissible limits of harmful pollutants emissions from industrial enterprises

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17.4.1.02-83: Nature protection. Soils. Classification of chemicals for pollution control

GOST 17.4.3.02-85: Nature protection. Soils. Requirement for fertile layer conservation in performing earth-moving

GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection

GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions

GOST 17.5.3.05-84: Nature protection. Land reclamation. General requirements for lands to be backfilled

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 23274-84: Mobile buildings. Electrical devices. General specifications

GOST 23407-78: Fencings for building sites. Specifications

GOST 23764-79: Gamma-defectoscopes. General technical specifications

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24297-87: Input inspection of products. General provisions.

GOST 25113-86: Non-destructive testing x-ray apparatus for industrial flaw detection. General specifications

GOST 25866-83: Exploitation of technique. Terms and definitions

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 28012-89: Demountable travelling stage. Specifications

GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 31993-2013: Paint materials. Determination of film thickness

GOST 32299-2013: Paint materials. Pull-off test for adhesion

GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8695-75: Tubing (pipes). Flattening testing method

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control

GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST ISO 8573-3-2006: Compressed air. Part 3. Test methods for measurement of humidity

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 21.1001-2009: System of design documents for construction. General principles

GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents

GOST R 21.1101-2013: System of design documents for construction. Main requirements for design and working documents

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51694-2000: Paints and varnishes. Determination of film thickness

GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules

GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

NRB 99: Radiation Safety Standards

ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways

ODN 218.010-98: Guidelines for the Design, Construction, and Operation of Ice Crossings

OND 1-84: Procedural Guidelines for the Review, Examination, and Conformity Assessment of Proposed Air Quality Protection Measures and for Issuing a Permit for Emission of Pollutants into the Atmosphere

OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions

Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"

Order 223: Rules for the use of scaffolding for construction, reconstruction, operation of linear objects

Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"

Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"

Order 605: Federal norms and rules in the field of industrial safety "Safety rules for blasting operations"

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-372-00: Non-destructive test laboratory certification rules and main requirements.

PB 03-440-02: Attestation rules for nondestructive inspection personnel

PB 08-624-03: Safety Regulations for oil and gas industry

PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety

PB 13-407-01: Uniform Safety Requirements for Blasting Operations

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 03-606-03: Instructions for visual and measuring control

RD 03-613-03: Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities

RD 03-614-03: Order of welding equipment application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.

RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections

RD 11-04-2006: Procedure of state construction supervision inspections and issuing certificates of conformance of built, reconstructed and repaired capital construction objects with the requirements of technical regulations (norms and standards), other statutory norms and design documents

RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.

Resolution 102: On Approval of the Procedure for the Use of Welding Equipment in the Manufacture, Installation, Repair and Reconstruction of Technical Devices for Hazardous Production Facilities

Resolution 390: Fire safety rules in the Russian Federation

Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services

Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SanPiN 2.6.1.2523-09: Norms of radiation safety

SanPiN 2.6.1.3164-14: Hygienic requirements for ensuring radiation safety during X-ray inspection

SN 452-73: Standards for the Allocation of Land for Trunk Pipelines

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SP 103.13330.2012: Protection of mines against ground or surface water

SP 104.13330.2011: Engineering protection of territories from flooding

SP 104.13330.2016: Ground protection from flooding and underflooding

SP 11-105-97: Engineering and geological survey for construction

SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities

SP 112.13330.2011: Fire safety of buildings and works

SP 119.13330.2012: Railways of 1520 mm

SP 121.13330.2012: Aerodromes

SP 12-136-2002: Decisions regarding labor protection and industrial safety in construction organization plans and work execution plans

SP 122.13330.2012: Railway and highway tunnels

SP 126.13330.2012: Survey operations in construction

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2011: Steel structures

SP 2.6.1.1283-03: Radiation safety of X-ray inspection.

SP 24.13330.2011: Pile foundations

SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

SP 36.13330.2012: Trunk pipelines

SP 4.13130.2009: Fire containment at protected facilities. Requirements to spatial planning and structural solutions

SP 4.13130.2013: Systems of fire protection. Restriction of fire spread at object of defense. Requirements to special layout and structural decisions

SP 45.13330.2012: Earth structures, bases and foundations

SP 47.13330.2012: Engineering survey for construction. Basic principles

SP 48.13330.2011: Organization of construction

SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 71.13330.2011: Insulating and finishing coatings

SP 72.13330.2011: Protection of building structures and structures from corrosion

SP 77.13330.2011: Automation systems

SP 77.13330.2016: Systems of automation. 

SP 86.13330.2012: Main pipelines

VSN 006-89: Construction Of Main And Field Pipelines Welding

VSN 010-88: Construction of main pipelines. Underwater transitions

VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works

VSN 179-85: Guidelines for the Remediation of Lands Used for the Construction of Pipelines

VSN 2-105-78: Instructions for construction of temporary roads for pipeline construction in difficult conditions (for wet and saturated terrains)

The Document is Referenced By:

GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications

GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 58329-2018: Rules for the operation of main condensate pipelines and product pipelines

GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules

GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines

GOST R 59411-2021: Field pipelines made of fiberglass pipes. Design and operation rules

GOST R 59510-2021: Internal engineering networks of buildings and structures. Installation and commissioning of heat pump systems for heat and cold supply of buildings. Rules and control of work performance

GOST R 70188-2022: Construction works and typical technological processes. Corrosion protection of steel structures in the conditions of the construction site. Rules and control of work performance

Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes

ODM 218.4.030-2016: Guidelines for assessing the capacity of ice crossings

Order 285/pr: On approval of SP 86.13330.2022 "SNiP III-42-80* Main Pipelines

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"

SP 119.13330.2017: Railways with 1520 mm track

SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas

SP 126.13330.2017: Geodetic works in building

SP 129.13330.2019: External networks and water supply and sewerage facilities

SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction

SP 36.13330.2012: Trunk pipelines

SP 392.1325800.2018: Pipelines trunk and field for oil and gas. Executive documentation during construction. Forms of requirements for maintenance and execution

SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production

SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control

SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities

SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control

SP 424.1325800.2019: Pipelines trunk and field for oil and gas. Corrosion protection works by means of electrochemical protection and work execution control

SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone

SP 471.1325800.2019: Building Information Modeling. Quality control of construction works

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!