Manual for impulse and low consumption fire extinguishing systems
Руководство по проектированию автономных источников теплоснабжения
Status: Effective
Manual for impulse and low consumption fire extinguishing systems
Инструкция к импульсным и малопотребляющим системам пожаротушения
Choose Language:
Format: Electronic (pdf/doc)
Approved: PNIIIS Gosstroy of the USSR,
1/1/1977
SKU: RUSS146398
The Product is Contained in the Following Classifiers:
Highways (Max) »
Engineering surveys for construction of roads and artificial structures »
1. General engineering survey questions »
Highways (Max) »
Engineering surveys for construction of roads and artificial structures »
2. Engineering and geodetic surveys »
2.1. General questions of geodetic surveys »
Highways (Max) »
Engineering surveys for construction of roads and artificial structures »
3. Engineering and geological surveys »
3.1. General issues of engineering and geological surveys »
Highways (Max) »
Design, construction, repair and maintenance of roads »
1. General issues of design and construction (reconstruction) of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
3. Economic survey and justification for construction of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
4. Justification of investments in construction of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
8. Contracts for design and construction of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
11. Quality control of design and construction of roads. Diagnostics, assessment of state, acceptance into operation of highways »
Highways (Max) »
Design, construction, repair and maintenance of roads »
12. Repair, maintenance, operation of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
13. Ecological requirements and environmental protection in design and construction of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
19. City roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
20. Organization of construction »
Highways (Max) »
Design, construction, repair and maintenance of roads »
21. Geotextiles in road construction »
Highways (Max) »
Design, construction, repair and maintenance of roads »
22. Strengthening slopes of roadbed, cones of bridges, eroded channels »
Highways (Max) »
Design, construction, repair and maintenance of roads »
24. Roadbed »
24.1 General documents on design and construction of roadbed »
Highways (Max) »
Design, construction, repair and maintenance of roads »
24. Roadbed »
24.7 Design and construction of roadbed in other special conditions »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.1 General documents on design and installation of road pavement »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.2 Concrete pavements »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.3 Asphalt pavements (and others using bitumen, tar and mastic gum) »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
6. Strengthening cones of bridges, eroded channels, slopes of floodplain embankments »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
9. Bridge bed »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
11. Steel and steel-concrete bridges »
11.9. Protection of metal structures against corrosion »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
14. Reinforced concrete bridges »
14.1. Design and Construction Documents »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
19. Reconstruction, repair and maintenance of artificial structures »
19.1. General documents »
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
19. Reconstruction, repair and maintenance of artificial structures »
19.5. Repair of elements of bridge deck »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.5 Coatings and bases of stabilized soil and materials. Use of industrial waste in road construction »
Construction (Max) »
Reference documents »
Reference guidelines to SNiP »
Construction (Max) »
Reference documents »
Policy letters, regulations, recommendations, etc. »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of State Fire Service and private security of Ministry of Internal Affairs »
Construction (Max) »
Regulations »
Regulatory documents of Russian Federation subjects »
Regulatory documents of Moscow »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of artificial structures on roads and railways »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of communication facilities »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of facilities of other ministries »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of energy facilities »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
Construction (Max) »
Regulations »
Regulatory documents of housing and communal services »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents on labor protection »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents on geodesy and cartography »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
1 Organizational and technical measures for ensuring fire safety »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.2 Environmental safety requirements for subsoil use operations »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.4 Requirements for protection of surface water bodies in implementation of activities »
2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.1 Fundamentals of Environmental Management »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
1 Basic labor protection requirements »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
13.020.99 Environmental protection, other aspects »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.010 Energy and heat engineering in general »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.080 Heat pumps »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.020 Telecommunications in general »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.040 Telecommunication Systems »
33.040.35 Telephone networks »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.040 Telecommunication Systems »
33.040.99 Other equipment for telecommunication systems »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.060 Radio communication »
33.060.40 Cable Distribution Systems »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.060 Radio communication »
33.060.99 Other radio equipment »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.160 Audio, video and audiovisual equipment »
33.160.01 Audio, video and audio-visual systems in general »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.100 Materials for strengthening of composites »
59.100.10 Textile fiberglass materials »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.100 Chemical products »
71.100.20 Industrial gases »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.40 Cost of construction and maintenance of buildings and structures »
91.010.40-20 Cost of pre-project and project materials »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.020 Urban planning. Planning and development of settlements »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.20 Acoustics in buildings. Soundproofing »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.60 Water supply systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.80 Drainage Systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.160 Lighting »
91.160.10 Interior lighting »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.01 Construction technology in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.20 Engineering surveys for construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.30 Organization and order of work. Quality management and quality assurance »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.010 Civil engineering in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.45 Foundations »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.040 Construction of bridges »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.01 Road construction in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.99 Road construction, other aspects »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.120 Airport construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
The Document is Replaced With:
ODM 218.2.020-2012: Guidelines for assessing the capacity of highways
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
As a Replacement Of:
VSN 166-70: Technical Instructions for the Construction of the Roadbed from Over-Wet Soils
VSN 55-69: Instruction for determination of required density and supervision of compaction of motor road beds
VSN 97-63: Instructions for the construction of the roadbed
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Code 117-FZ: Tax Code of the Russian Federation (Part Two)
Disposition IS-5-r: Classification of works on repair and maintenance of public roads
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
Federal Law 7-FZ: Environmental Protection
GN 2.1.8/2.2.4.019-94: Tentative Permissible Levels (TPL) of Exposure To Electromagnetic Radiation Emitted By Cellular Radio Communications Systems
GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication
GOST 10060-87: Concretes. Methods of frost resistance determination
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10214-78: Petroleum solvent. Specifications
GOST 10249-90: Millet seeds. Varietal and sowing characteristics. Specifications
GOST 10330-76: Scutched flax fibre. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10448-80: Marine, locomotive and industrial engines. Acceptance. Test methods
GOST 10499-78: Heat insulating products made of glass staple fibre. Technical requirements
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10650-72: Peat. Determination of the disintegration degree
GOST 10690-73: Technical potassium carbonate (potash). Technical conditions
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10807-78: Road signs. General specifications
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 1090-41: Textile fabrics. Test methods
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11086-76: Sodium hypochlorite. Technical conditions
GOST 11130-75: Turf. Methods for the determination of smalls and impurities
GOST 11159-76: Ferric chloride technical
GOST 11209-72: Cotton and mixed fabrics for work clothing
GOST 11209-85: Cotton and blended fabrics for protective clothing
GOST 11246-96: Sunflower extraction cake
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11303-75: Peat and products of its processing. Method of preparation of analysis sample
GOST 11362-76: Petroleum products. Determination of base, acid and acidity by potentiometric titration
GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11512-65: Petroleum bitumen. Method for determination of ash content
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.0.002-80: Occupational safety standards system. Terms and definitions
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.1.040-83: Occupational safety standards system. Laser safety. General
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.1.045-84: Occupational safety standards system. Electrostatic fields. Tolerance levels and methods of control at working places
GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.010-75: Occupational safety standards system. Pneumatic Hand Machines. General safety requirements
GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements
GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking
GOST 12.2.051-80: Occupational safety standards system. Technological ultrasonic equipment. Safety requirements
GOST 12.2.053-91: Occupational safety standards system. Stacker cranes. Safety requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.071-90: Container cranes
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.3.012-77: Occupational safety standards system. Diving works. General safety requirements
GOST 12.3.018-79: Occupational safety standards system. Ventilation system. Aerodynamical test methods
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools
GOST 12.3.035-84: Construction. Painting. Safety requirements
GOST 12.3.046-91: Occupational safety standards system. Automatic fire-fighting sets. General technical requirements
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.049-78: System for safety standard's. Cotton and blended fabrics for industrial clothing. Method of determination wet treatment
GOST 12.4.051-87: Individual hearing protection means
GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications
GOST 12.4.089-86: Occupational safety standards system. Building. Safety belts. General technical specifications
GOST 12.4.107-82: Occupational safety standards system. Building. Safety ropes. General safety requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12.4.125-83: Safety equipment for collective protection of personnel against exposure of mechanical factors
GOST 12026-76: Filter paper for laboratory application
GOST 12071-2000: Soils. Sampling, packing, transportation and storage of samples
GOST 1215-79: Malleable iron castings
GOST 12248-78: Soils. Laboratory methods for determination of shear strength
GOST 12248-96: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12260-81: Seed of annual and biannual flowers. Sowing characteristics. Specifications
GOST 12288-66: Mining rocks. Methods for the determination of mechanical properties by punching
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 125-79: Gypsum binders. Specifications
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12776-67: Stripped supports. Design and dimensions
GOST 12784-78: Mineral powder for asphaltic mixtures. Methods of tests.
GOST 12801-84: Asphaltic concrete mixtures for roads and airdromes, tar concrete mixtures for roads, asphaltic concrete and tar concrete. Methods of testing
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 12871-67: Chrisotile asbestos. Specification
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13073-77: Zinc wire
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 13220-67: Dressed skins of ground squirrel. Specifications
GOST 13496.0-80: Mixed feeding-stuffs. Methods of sampling of average sample
GOST 13508-74: Traffic marking
GOST 13587-68: Bonded fabrics. Sampling methods for laboratory tests and general test conditions
GOST 13587-77: Non-woolen sheets and piece-goods textile. Acceptance rules and sampling-method
GOST 13634-90: Corn
GOST 13830-97: Food common salt. General specifications
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14231-88: Urea-formaldehyde resins. Specifications
GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 1460-81: Calcium carbide. Technical conditions
GOST 1461-75: Petroleum and petroleum products. Method of ash test
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14870-77: Reagents. Methods for determination of water
GOST 14982-69: Rectangular steel all-cast mouldings boxes having inside dimensions: length 1000; 1200 mm, width 800 mm, height 450; 500 mm. Construction and dimensions
GOST 15.004-88: Personal means of protection
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15825-80: Coloured Portland cement. Specifications
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16363-98: Fire protective means for wood. Methods for determination of fire protective properties
GOST 16381-77: Thermal insulating building materials and products. Classification and general technical requirements
GOST 16441-78: Oil-filled cables for alternating voltage 110-500 kV. Specifications
GOST 16470-84: Barley. Requirements for state grain purchases. Specifications
GOST 16475-81: Polyvinylchloride floor tiles. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 16617-87: Household electric heating appliances
GOST 1692-85: Chlorinated lime
GOST 17.0.0.01-76: System of standards in nature protection and improving utilization of nature resources. General provisions.
GOST 17.2.1.01-76: Nature protection. Atmosphere. Classification of effluents according to composition
GOST 17.2.1.02-76: Nature protection. Atmosphere. Terms and definitions of emission from motor vehicles, tractors, agricultural machinery and road-building vehicles
GOST 17.2.2.03-87: Nature protection. Atmosphere. Rates and methods of measuring carbon monoxide and hydrocarbons content in exhaust gases of petrol-engine vehicles. Safety requirements
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.4.1.02-83: Nature protection. Soils. Classification of chemicals for pollution control
GOST 17.4.2.01-81: Nature protection. Soils. Nomenclature of sanitary conditions indices
GOST 17.4.2.03-86: Nature protection. Soils. Passport of soil
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 17.4.3.06-86: Nature protection. Soils. General requirements for the classification of soils in accordance with the impact of chemical pollutants on them
GOST 17.4.4.03-86: Nature protection. Soils. Method for determination of potential danger of erosion due to rains
GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions
GOST 17.5.1.02-85: Nature protection. Lands. Classification of disturbed lands to be recultivated
GOST 17.5.1.03-86: Nature protection. Lands. Classification of overburden and enclosing rocks for biological recultivation of lands
GOST 17.5.3.02-90: Nature protection. Lands. Rates for shelter belts allotment along railroads and highways on lands of state forest reserves
GOST 17177-87: Heat insulating construction materials and products. Methods of control
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression
GOST 17308-88: Twines. Specifications
GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17435-72: Drawing rulers. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17697-72: Vehicles. Rolling wheel. Terms and definitions
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17811-78: Polyethylene bags for chemical products. Specifications
GOST 17922-72: Textile fabrics and piece-goods. Method of tearing load determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 18108-80: Polyvinylchloride linoleum with heat and sound-insulating backing. Specifications
GOST 18180-72: Petroleum bitumen. Method for determination of change of mass after hitting
GOST 18276.0-88: Machine-made textile floor coverings and carpet products. Method of sampling
GOST 18276-72: Carpets and carpet products. Test methods
GOST 1839-80: Asbestos cement pipes and couplings for non-pressure pipe lines. Specifications
GOST 18659-81: Bitumen road emulsions. Technical requirements
GOST 18918-85: Amorphous
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19006-73: Motor fuel. Method for determination of the filtering factor
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19121-73: Petroleum Products Determination of sulphur content by lamp method
GOST 19151-73: Red lead. Specifications
GOST 1928-79: Coal solvent. Specifications
GOST 19297-73: Treated for fire-resistance cotton fabrics. Specifications
GOST 19360-74: Film liner-bags. General specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 19651-74: Diammonium phosphate fodder
GOST 19734-80: Input control devices for residential and public buildings
GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
GOST 19912-81: Soils. Field test method by dynamic sounding
GOST 19932-74: Petroleum products. Method of Conradson coking capacity test
GOST 2.114-95: Unified system for design documentation. Specifications
GOST 2.601-95: Operational documents
GOST 20022.14-84: Wood protection. Methods for determination of moisture content prior to impregnation
GOST 20022.6-93: Wood protection. The ways of impregnation
GOST 20054-82: Concrete non-pressure pipes. Specifications
GOST 20069-81: Soils. Field test method by static sounding
GOST 20073-81: General-purpose stationary air piston compressors. Acceptance rules and methods of tests
GOST 20083-74: Fodder yeast
GOST 20287-91: Petroleum products Method of test for flow point and pour point
GOST 20444-85: Noise. Traffic flows. Methods of noise characteristic measurement
GOST 20522-75: Soils. Statistical rating characteristics
GOST 20566-75: Textile fabrics and piece-goods. Acceptance rules and sampling method
GOST 2062-77: Reagents. Hydrobromic acid. Specifications
GOST 2070-82: Light petroleum products. Methods for determination of iodine numbers and content of unsaturated hydrocarbons
GOST 20799-88: Industrial oils Specifications
GOST 2081-92: Carbamide
GOST 2084-77: Mobile gasoline Specifications
GOST 21.101-97: System of design documents for construction Main requirements for design and working documents
GOST 21.608-84: System of building design documents. Interior electric lighting. Working drawings.
GOST 21.613-88: System of building design documents. Power electrical equipment. Working drawings
GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing
GOST 21153.1-75: Rocks. Method for the determination of strength factor according to Protodyakonov
GOST 21153.6-75: Rocks. Method for the determination of bend strength limit
GOST 21153.7-75: Rocks. Method for determination of elastic longitudinal and diametrical waves rate spreading
GOST 21201-75: Support holders for skew clamping of turret lathe cutters. Design and dimensions
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 21241-77: Medical pincers. General specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 21719-80: Soils. In-situ methods of shearing test in boreholes and in massive
GOST 21749-76: Petroleum products. The method for determination of saponification value and free fats content
GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics
GOST 22011-95: Passenger and freight elevators
GOST 2210-73: Ammonium chloride technical. Technical conditions
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 2226-88: Paper bags
GOST 2246-70: Welding steel wire. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22688-77: Lime for building purposes. Test methods
GOST 22689.2-89: Polyethylene waste-pipes
And related shaped parts. Construction
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 22782.3-77: Explosion-proof electrical equipment with special means
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22845-85: Electrical passenger and freight elevators
GOST 22847-85: Ceramic toilet pans. Specifications
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23110-84: Household electric water heaters
GOST 23161-78: Soils. Laboratory method for determination of subsiding characteristics
GOST 23239-89: Synthetic fat acids C5-C6, C7-C9, C5-C9, C10-C13, C10-C16, C17-C20 fractions. Specifications
GOST 23253-78: Soils. Method for field tests of frozen soils
GOST 23274-84: Mobile buildings. Electrical devices. General specifications
GOST 23278-78: Soils. Fields methods of permeability tests
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23457-86: Traffic control devices
GOST 23477-79: Collapsible travelling small panel inventory form for monolithic concrete and reinforced concrete. Specifications
GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 23741-79: Soils. In-situ methods of shearing test mine openings
GOST 23843-79: Pea. Specifications
GOST 23908-79: Soils. A laboratory method for determination of volume change by oedometer test
GOST 23932-79: Laboratory glassware and equipment. General technical requirements
GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 24064-80: Mastics adhering rubber. Specifications
GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications
GOST 24143-80: Soils. Laboratory methods for determination of swelling and shrinking characteristics.
GOST 24183-80: Power cable for stationary, installation. General technical requirements
GOST 24444-87: General assembly and technological requirements
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 24940-96: Buildings and structures. Methods of measuring luminance
GOST 25100-95: Soils. Classification
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25263-82: Calcium hypochlorite is neutral. Technical conditions
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25485-89: Cellular concretes. Specifications
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25902-83: Auditoria. Speech intelligibility determination method
GOST 26101-84: Welding powdered wire
GOST 26149-84: Sheet floor covering on the base of chemical fibres. Specifications
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 26627-85: Rolled roofing's and hydroinsulatings materials. Acceptance rules
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing
GOST 26887-86: Platforms and ladders for civil engineering work. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 27023-86: Welded carpets of PVC linoleum on heat- and sound-insulating backing. Specifications
GOST 27331-87: Fire engineering. Cassification of fires
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 27750-88: Restoring coatings. Coating thickness control methods
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 28338-89: Nominal bores (nominal sizes)
GOST 286-82: Clay sewer pipes
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements
GOST 29104.0-91: Industrial fabrics. Industrial fabrics. Acceptance rules and sampling method
GOST 29104.1-91: Industrial fabrics. Methods for determination of linear dimensions, linear and surface density
GOST 29104.5-91: Industrial fabrics. Methods for determination of test strength
GOST 29169-91: Laboratory glassware. One-mark pipettes
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 30242-97: Imperfections in metallic fusion welds. Classification, designation and definitions
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30331.1-95: Electrical installations of buildings. General
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 30331.4-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects
GOST 30331.5-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST 30412-96: Road roads and airfields. Methods for measuring base irregularities and coatings
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 305-82: Diesel fuel. Specifications
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3122-67: Diesel fuel Method for determination of cetane index
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 380-94: Normal quality carbon steel
GOST 3811-47: Textile fabrics. Methods for determining linear dimensions and weight
GOST 3811-72: Textile materials. Textile fabrics, nonwoven fabrics and piece-articles. Methods for determination of linear dimensions linear and surface density
GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 4.106-83: System of product quality indices. Gas extinguisher mixtures. Nomenclature of indices
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 4147-74: Reagents. Ferric chloride hexahydrate. Specifications
GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications
GOST 4255-75: Petroleum products. Method for determination of melting point by Zhukov
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 473.1-81: Chemically resistant and heat resistant ceramic wares. The method for determination of acid resistance
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 4795-53: Concrete for hydraulic engineering. General requirements
GOST 4-84: Carbon tetrachloride for industrial use. Specifications
GOST 4979-49: Water of economical-drinking and industrial water supply. Methods for chemical analysis. Sampling, storing and transportation of samples
GOST 5066-91: Motor fuels. Methods for determination of cloud, chilling and freezing points
GOST 5072-79: Mechanical stop-watches. Specification
GOST 5180-84: Soils. Laboratory methods for determination
GOST 539-80: Asbestos cement pressure pipes and couplings. Specifications
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 5686-78: Piles. Field test methods
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 5985-79: Petroleum products. Method for determination of acidity and acid number
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 606-75: Cottonseed solvent cake
GOST 61-75: Reagents. Acetic acid. Specifications
GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies
GOST 6318-77: Sodium sulfate technical. Technical conditions
GOST 6321-92: Engine fuels. Method for copper strip test
GOST 6356-75: Petroleum products. Method of test for flash point boy closed cup
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6465-76: Enamels PF-115. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6617-76: Petroleum construction bitumen
GOST 6718-86: Chlorine liquid. Specification
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 6787-2001: Ceramic floor tiles. Specifications
GOST 6793-74: Petroleum products. Method of drop point determination
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6823-77: Crude glycerine. Specifications
GOST 6942.0-80: Cast iron waste pipes and fittings. General specifications
GOST 6942.24-80: Cast iron waste pipes and fittings. Branch pipes with accessories. Construction and dimensions
GOST 6943.0-93: Textile glass. Rules of acceptance
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7169-66: Wheat pran. Specifications
GOST 7212-74: Cape chisels
GOST 7251-77: Polyvinilohloride linoleum with woven and unwoven backing. Specifications
GOST 7328-82: General-purpose and reference mass gages
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 7931-76: Natural drying oil
GOST 8.014-72: State system for ensuring the uniformity of measurements. Methods and means for verification of photoelectric illumination photometers
GOST 8.023-90: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring continuous and pulse luminous radiation parameters
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8.563.1-97: Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
GOST 8050-85: Carbon dioxide,
GOST 8135-74: Iron minimum. Specifications
GOST 8242-88: Profiled details from wood and wood materials for building. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8268-82: Gravel for construction work
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8489-85: Motor fuel. Method for determination of existent gums (Budarov's)
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 8515-75: Diammonium phosphate. Technical conditions
GOST 8559-75: Square bar steel. Products sizes
GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements
GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST 8709-82: Light boards for industrial and public buildings
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-85: Sand for construction work. Technical requirements
GOST 8736-93: Sand for construction works. Specifications
GOST 8749-79: Foundry aerators. Types, basic parameters and dimensions
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 8946-75: Ductile iron and steel fittings with parallel thread for pipelines. Union passage elbows. Basic dimensions
GOST 8947-75: Ductile iron and steel fittings with parallel thread for pipelines. Transition angles. Basic dimensions
GOST 8949-75: Ductile iron and steel fittings with parallel thread for pipelines. Transition tees. Basic dimensions
GOST 8954-75: Ductile iron fittings with parallel thread for pipelines. Straight short sockets. Basic dimensions
GOST 8960-75: Ductile iron fittings with parallel thread for pipelines. Threaded bushings. Basic dimensions
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.072-77: Unified system of corrosion and ageing protection. Paint coating. Terms and definitions
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-80: Metal surface preparation for painting
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9078-84: Flat pallets
GOST 9087-81: Welding melted fluxes
GOST 9097-82: Ammonium sulfate
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9179-77: Lime for building purposes. Specifications
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 9410-78: Petroleum xylol. Specifications
GOST 9413-78: Lighting panels for dwelling-houses. General specifications
GOST 9463-88: Round wood products
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9480-89: Sawn facing slabs of stone. Specifications
GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting
GOST 9980.2-86: Paint materials. Test sampling
GOST R 1.5-92: State system for standardization of the Russian Federation. General requirements for lay-out, formulation, presentation and contents of standards
GOST R 12.0.006-2002: Occupational safety standards system. General requirements on occupational health and safety management in organization system
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 50030.1-92: Low-voltage switchgear and control gear. Part 1. General rules
GOST R 50030.2-94: Low-voltage switchgear and control gear. Part 2. Circuit-breakers
GOST R 50275-92: Geotextiles. Sampling method
GOST R 50345-99: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.11-96: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 701. Locations containing a bath tub or shower basin
GOST R 50571.12-96: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 703. Locations containing sauna heaters
GOST R 50571.13-96: Electrical installations of buidings. Part 7. Requirements for special installations or locations. Section 706. Restrictive conducting locations
GOST R 50571.14-96: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 705. Electrical installations of agricultural and stock-breeding buildings
GOST R 50571.15-97: Electrical installations of buildings
GOST R 50571.16-99: Electrical installations of buildings. Part 6. Verification. Chapter 61. Initial verification
GOST R 50571.17-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 48. Choice of protective measures as a function of external influences. Section 482. Protection against fire
GOST R 50571.18-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 442. Protection of low-voltage installations against faults between high-voltage systems and earth
GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching
GOST R 50571.20-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 444. Protection against electromagnetic interferences (EMI) in installations of buildings
GOST R 50571.21-2000: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Section 548. Earthing arrangements and equipotential bolding for information technology installations
GOST R 50571.22-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 707. Earthling requirements for the installation of data processing equipment
GOST R 50571.23-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 704. Construction and demolition site installations
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R 50571.7-94: Electrical installations of buildings. Part 4. Protection for safety. Isolation, switching off, control
GOST R 50571.9-94: Electrical installations of buildings. Part 4. Security requirements. Application of overcurrent protection measures
GOST R 50597-93: Automobile roads and streets. The requirements to the level of maintenance. Satisfied the traffic safety
GOST R 50810-95: Fire hazard of textiles. Decorative textiles. Flammability test method and classification
GOST R 50849-96: Safety belts constructions. General specifications. Test methods
GOST R 50923-96: Displays. Operator's workplace. General ergonomic requirements and environmental requirements. Measuring methods
GOST R 50969-96: Automatic gas fire extinguishing systems. General technical requirements. Test methods
GOST R 51032-97: Building materials spread flame test method
GOST R 51069-97: Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
GOST R 51293-99: Identification of products. General principles
GOST R ISO 5089-99: Textiles. Preparation of laboratory test samples and test specimens for chemical testing
Letter 14-00-09/1044: About the presence of a typo in the Safety Manual
Manual for MGSN 2.04-97: Design of sound insulation of walling of residential and public buildings
Manual for MGSN 2.04-97: Designing protection against traffic noise and vibrations of residential and public buildings
Manual for MGSN 2.04-97: Designing protection against noise and vibration of engineering equipment in residential and public buildings
Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas
MGSN 1.01-97: Part 1: Interim Urban Development Code of the City of Moscow
MGSN 2.02-97: Allowable levels of ionizing radiation and radon at the construction sites
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
MU 1.1.724-98: Organization and conduct of sanitary and hygienic measures in chemical accident zones
NPB 03-93: Approval procedure of design estimates for construction by the state fire fighting supervision bodies
NPB 05-93: The order of participation of bodies of state fire supervision of Russian federation in work of commissions on acceptance in operation of the objects, completed by construction
NPB 104-95: Design of Public Fire Warning Systems in Buildings and Structures
NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard
NPB 201-96: Industrial fire brigades. General requirements
NPB 232-96: Procedure for monitoring of compliance with requirements of normative documents for fire protection means (production, use, and maintenance)
NPB 240-97: The smoke control systems of buildings. Methods of acceptance and routine tests
NPB 251-98: Fire retardant compositions and substances for wood. General requirementes. Test methods
NPB 257-2002: Textile materials. Bedding articles. Upholstered furniture. Blinds. Curtains. Flammability test methods
NPB 51-96: Gaseous Fire Extinguishing Agents. General Technical Requirements for Fire Safety and Test Methods
NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
NRB 99: Radiation Safety Standards
ODN 218.046-01: Design of non-rigid pavement
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 105: Federal norms and rules in the field of industrial safety "Safety rules for offshore oil and gas facilities"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 48: On approval of the Safety Guide "Technique for technical diagnostics of gas reduction points"
Order 490: Federal norms and rules in the field of industrial safety "Basic requirements for non-destructive testing of technical devices, buildings and structures at hazardous production facilities"
Order 515: On the approval of the Federal norms and rules in the field of industrial safety "Instructions for predicting dynamic phenomena and monitoring the rock mass during the development of coal deposits"
Order 515: Federal norms and rules in the field of industrial safety "Rules for the safe operation of infield pipelines"
Order 520: Model regulation on a unified industrial safety and labor protection management system for organizations for the extraction (processing) of coal (oil shale)
Order 520: On the approval of the Federal norms and rules in the field of industrial safety "Instructions for localization and elimination of the consequences of accidents at hazardous production facilities where mining operations are carried out"
Order 520: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities of main pipelines"
Order 520: On approval of the Regulations on the functional subsystem of the organization of work to prevent and eliminate oil and oil products spills on inland waterways from ships and objects of sea and river transport of the unified state system for the prevention and elimination of emergency situations
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Order 542: On approval of standard lease agreements for forest areas
Order 542: Federal norms and rules in the field of industrial safety "Safety rules for gas distribution and gas consumption networks"
Order 558: Federal norms and rules in the field of industrial safety "Safety rules for facilities using liquefied petroleum gases"
Order 558: On approval of the forms of checklists (lists of checklists) used in the implementation of licensing activities for the examination of industrial safety
Order 781: Recommendations for the development of localization and emergency response plans for explosion-, fire- and chemically hazardous production facilities
Order 96: Federal norms and rules in the field of industrial safety "General rules of explosion safety for explosion and fire hazardous chemical, petrochemical and oil refining industries"
Ordinance 561-RM: Regulations on the unified order of pre-project and project preparation of construction in Moscow.
Ordinance OS-754-r: On enactment of "Temporary Guidelines on the organization of the development of innovations in the design, construction, reconstruction, repair and maintenance of roads and road structures
OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
PB 03-108-96: Process pipeline design and safe operation rules
PB 10-06-92: Installation and Safe Operation Requirements for Elevators
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 12-368-00: Gas industry safety rules
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation
PPB 01-93*: Fire Safety Rules in the Russian Federation
R 2.2.755-99: Hygienic Criteria for Evaluation and Classification of Labor Conditions by Indexes of Harmfulness and Danger of Industrial Environment and Working Process Difficulty and Intensity
RD 03-33-2008: Instructions on organization of software protection measures, while ensuring the safety of nuclear facilities.
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-606-03: Instructions for visual and measuring control
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-333-99: Standard Guidelines for Personnel Responsible for the Safe Operation of Pressure Vessels
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 10-577-03: Typical instruction for metal control and extend the life of the main elements of boilers, turbines and pipelines of thermal power stations. Serie 10. Output 30.
RD 12-253-98: Procedural Guidelines for Inspection of Gas Supply Facilities
RD 153-34.0-17.464-00: Guidelines for metal control and extension of the service life of pipelines of categories I, III and IV
RD 153-34.0-20.585-00: Guidelines for Analysis of Quality of Startup (Shutdown) of Main Thermal Power Equipment of Thermal Power Stations
RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment
RD 153-34.0-39.604-00: Procedural Guidelines for Detaching Support and Suspension System of Piping System and Acceptance of Support and Suspension Fastening System After Completion of Repair
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-17.455-98: Instructions for monitoring and extending the service life of steam pipelines of thermal power plants made of centrifugal cast pipes
RD 153-34.1-17.467-2001: Rapid method for evaluating remaining life of boiler header and steam pipeline joints according to structure factor.
RD 153-34.1-26.304-98: Instructions for organization of operating, order and timing for verification of safety devices of boilers at thermal power plants.
RD 153-34.1-30.502-00: Procedural Guidelines for Organization of Rust-Preventive Treatment of Thermal Energy Equipment Using Air
RD 153-34.1-39.401-00: Procedural Guidelines for Initial Adjustment of Piping Systems at In-Service Thermal Power Stations
RD 153-34.1-39.502-98: Guidelines for Operation and Procedure and Schedule for Checking safety Devices for Vessels, Apparatus, and Piping Systems of Thermal Power Stations
RD 153-34.1-39.504-00: General technical requirements for fittings of CHP plant ( TPP OTT - 2000).
RD 22-01-97: Requirements on Safety Assessment of the Operation of Production Buildings and Structures of Factory and Industrial Facilities (Inspection of Structural Elements by Specialized Organizations)
RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.
RD 34.03.202: Safety regulations for electrical installations
RD 34.03.284-96: Guidelines for Organization and Performance of Hazardous Work
RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines
RD 34.20.591-97: Procedural Guidelines for Preservation of Thermal Mechanical Equipment
RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures
RD 34.25.101-87: Power Units with Turbines T-180/210-310 and K-215-130 and Drum Boilers -Standard Startup Process
RD 34.26.508: Model Guidelines for Operation of Reduction-Cooling Units (BROU, ROU, PSBU, and PSBU SN)
RD 34.26.516-96: Model Guidelines for Startup from Various Thermal States and Shutdown of Medium-Pressure and High-Pressure Steam Boilers of Interconnected Thermal Power Stations
RD 34.39.503-89: Model Guidelines for Operation of Thermal Power Station Piping Systems
RD 34.45-51.300-97: Electrical equipment testing scope and standards.
RD 34.49.501-95: Model Guidelines for Operation of Automatic Water-Based Fire Extinguishing Systems
RD 78.145-93: Guiding document systems and complexes of security, fire and security and fire alarm rules for execution and acceptance of work
RD 78.146-93: Guidelines for Technical Supervision of the Design and Installation of Security Alarm Systems
RD 78.147-93: Common requirements to technical strengthening and alarm equipment of guarded objects
RDS 11-201-95: Instructions on the procedure for conducting state examination of construction projects
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution: Rules for the design and safe operation of steam and hot water boilers
Resolution 1485: On the approval of the Regulation on the training of citizens of the Russian Federation, foreign citizens and stateless persons in the field of protection against emergencies of natural and man-made nature
Resolution 18-25: Temporary order of application in the construction of new, including imported materials, products and structures
Resolution 207: Rules for the organization of preparation and production of excavation and construction work in Moscow.
Resolution 632: On approval of the Procedure for determining the payment and its maximum amount for environmental pollution, waste disposal, other types of harmful effects (as amended on December 26, 2013) (invalidated from 03/17/2017 on the basis of Decree of the Government of the Russian Federation of 03/03/2017 N 255 )
Resolution 730: Regulations on the admission of Russian carriers to the implementation of international road transport
Resolution 730: Regulations on the development of action plans for the containment and elimination of the consequences of accidents at hazardous production facilities
Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services
Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 2.1.6.575-96: Hygienic requirements for atmospheric air protection of the population aggregates
SanPiN 2.1.6.983-00: Atmospheric air and air in the enclosed rooms, sanitary air protection Hygienic requirements to quality assurance of atmospheric air in the populated areas
SanPiN 2.2.0.555-96: Hygienic Requirements for the conditions of Work of Women
SanPiN 2.2.1/2.1.1.1278-03: Health requirements for natural, artificial and mixed lighting of residential and public buildings
SanPiN 2.2.1/2.1.1.567-96: Sanitary Protection Zones and Sanitary Classification of Enterprises, Constructions and other Objects
SanPiN 2.2.2.1332-03: Hygienic Requirements for Organization of Work at Copying and Reproducing Equipment
SanPiN 2.2.2.542-96: Hygienic requirements to videodisplay terminals, personal electronic computers and work organization. Sanitary rules and norms
SanPiN 2.2.2/2.4.1340-03: Hygienic requirements for personal electronic computers and work organization
SanPiN 2.2.4.1191-03: Physical factors of the production environment. Electromagnetic fields in production environment
SanPiN 2.2.4.1294-03: Hygienic requirements for the air ion level of industrial and public facilities
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SanPiN 2.2.4/2.1.8.055-96: Physical Factors of the Industrial Environment. Physical Factors of the Ambient Medium Radiofrequency electromagnetic radiation (rf emr) Radiofrequency electromagnetic radiation (rf emr) under occupational and living conditions
SanPiN 2.2.4/2.1.8.582-96: Hygienic requirements when working with sources of air and contact ultrasound for industrial, medical and household purposes
SanPiN 2.6.1.1281-03: Sanitary rules on the radiation safety of personnel and the public during transportation of radioactive materials (substances)
SanPiN 4630-88: Sanitary rules and standards for preservation of surface waters against pollution
SDA 34-2008: Requirements for testing laboratories of the energy safety subsystem
SN 174-75: Instruction for industrial power supply design
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 25-74: Guidelines for Application of Soils Strengthened with Binders for Use in Beds and Pavements of Roads and Airfields
SN 305-77: Instructions for the design and installation of lightning protection of buildings and structures
SN 449-72: Design Guidelines for Roadbeds for Roads and Railroads
SN 462-74: Norms for Allocating Land for Prospecting Wells
SN 467-74: Land allocation standards for motor roads
SN 47-67: Instructions on the procedure for the preparation and approval of projects for the organization of construction and projects of work
SN 47-74: Instructions for the development of construction projects and projects of work
SN 496-77: Temporary instruction on designing the facilities for treatment of surface waste waters
SN 497-77: Temporary instruction on design, installation and operation of inflatable pneumatic structures
SN 509-78: Guidelines for Determination of Return on Investment from the Use of New Technologies, Inventions, and Innovations in Construction
SN 550-82: Specification for plastic process pipeline design
SN 65-76: Instructions for the protection of reinforced concrete structures against corrosion caused by stray currents
SNiP 1.02.07-87: Engineering Research for Construction
SNiP 1.06.05-85: Regulation on construction design supervision of enterprises, buildings and installation by design organizations
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-01-95: Instructions on the procedure of elaboration, coordination, approval, and composition of design documentation for construction of enterprises, buildings, and structures
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design
SNiP 2.02.03-85: Pile foundations
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.02.05-87: Foundations of dynamic load machines
SNiP 2.03.02-86: Concrete and reinforced concrete structures of dense silicate concrete
SNiP 2.03.03-85: Ferro cement structures
SNiP 2.03.04-84: Concrete and reinforced concrete structures designed to operate under elevated and high temperatures
SNiP 2.03.06-85: Aluminium structures
SNiP 2.03.09-85: Design of asbestos cement structures
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.03.13-88: Floors
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.04.05-86: Heating, Ventilating, and Air Conditioning
SNiP 2.04.09-84: Automatic fire protection systems
SNiP 2.05.08-85: Aerodromes
SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices
SNiP 2.06.14-85: Protection of Mining Excavations Against Groundwater and Surface Water
SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering
SNiP 2.10.03-84: Cattle-breeding poultry and fur-farming buildings and premises
SNiP 2.11.02-87: Refrigerators
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.02.03-84: Underground workings
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.01-87: Insulation and finishing coatings
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 3.05.03-85: Heat networks
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 3.05.06-85: Electrical devices
SNiP 3.05.07-85: Automated systems
SNiP 3.06.03-85: Automobile roads
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.06.06-88: Airports
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SNiP 32-03-96: Aerodromes
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SNiP II-11-77: Civil defense protective facilities
SNiP II-12-77: Noise protection
SNiP II-18-76: Foundations and foundations on permafrost soils. Design Standards
SNiP II-21-75: Concrete and reinforced concrete structures
SNiP II-25-80: Wood constructions
SNiP II-26-76: Roofing
SNiP II-4-79: Natural and artificial lighting
SNiP II-54-77: Concrete and Reinforced Concrete Dams
SNiP II-56-77: Use of Concrete and Reinforced Concrete Structures in Hydraulic Construction
SNiP II-60-75: Planning and development of cities, towns and rural settlements
SNiP II-6-74: Loads and Impacts
SNiP II-9-78: Engineering surveys for construction. Main provisions
SNiP II-A.6-72: Construction climatology and geophysics
SNiP III-10-75: Regulations for execution and acceptance of works. Site Improvement
SNiP III-15-76: Concrete and reinforced concrete structures monolithic
SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.
SNiP II-V.9-73: Anticorrosive protection of building structures of buildings and structures. Design Standards
SNiP I-V.2-62: Inorganic Binders and Admixtures for Concretes and Mortars
SP 11-102-97: Engineering environmental site investigations for construction
SP 11-105-97: Engineering and geological survey for construction
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
SP 12-101-98: Technical rules for manufacture of the outdoor thermal insulation of buildings with fine plaster on the insulant
SP 12-136-2002: Decisions regarding labor protection and industrial safety in construction organization plans and work execution plans
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 2.5.1198-03: Sanitary regulations for the organization of passenger transportation by rail
SP 2.5.1277-03: Sanitary and epidemiological requirements for the transport by rail of organized children's groups
SP 2.6.1.799-99: Main sanitary regulations to ensure radiation safety
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 40-101-96: Design and installation of pipelines made of polypropylene "Random copolymer"
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SP 40-103-98: Design and installation of pipeline systems of domestic hot and cold water supply using metal-polymer pipes
SP 40-104-2001: Design and installation of underground pipelines of water supply with fibreglass pipes. Amendments, published in the BST 2002, №1 № 4, № 5, 2005.
SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-102-98: Design and installation of heating system pipelines using metal-polymer pipes
SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
SP 42-104-97: Code of regulations on application of valving for construction of gas supply systems
SP 55-101-2000: Fencing structures made with gypsum-cardboard sheets
SP 55-102-2001: Structures made with gypsum fiber sheets
ST SEV 2440-80: Corrosion protection in construction. Structures of concrete and reinforced concrete. Classification of corrosive environments. To replace part of RS 2371-70
TSN 23-302-99: Local construction normatives. Daylight, artificial and combined lighting
TSN 23-315-2000: Allowable Levels of Noise and Vibration and Soundproofing Requirements for Residential and Public Buildings
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TSN 50-304-2001: Basements, foundations, and underground constructions
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TU 152-12-008-99: Installation of gas-LPG equipment for work on liquefied petroleum gas (GOS) on buses. Acceptance and release after installation. Test gas systems
VSN 115-75: Technical Guidelines for the Preparation and Application of Road Emulsions
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 123-90: Instructions for execution of acceptance documentation on electrical erection works
VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements
VSN 175-82: City of Moscow Guidelines for the Construction of Asphalt Concrete Road Pavements
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 20-87: Guidelines for Cold-Weather Skid Control for Roads and Highways
VSN 21-83: Guidelines for the Assessment of Return on Investment in Construction and Rehabilitation of Roads and Highways
VSN 23-75: Instructions for services on railway crossing
VSN 24-88: Technical Guidelines for Road Repair and Maintenance
VSN 25-86: Road Traffic Safety Guidelines
VSN 2-85: City of Moscow Urban Development Code
VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads
VSN 34-78: Guidelines for Clearing Drifts in Snow Barrier Plantings Along Roads and Highways
VSN 35-95: Process Guidelines for the Use of Polymer Filter Membranes for the Protection of Below-Grade Portions of Buildings and Structures Against Groundwater
VSN 37-84: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
VSN 39-79: Technical Guidelines to Stabilization of Roadsides
VSN 41-88: Regional and industry standards for the inter-repair service life of non-rigid pavements and coatings
VSN 41-88: Use of chemical additives
VSN 42-87: Guidelines to Financial Feasibility Studies for Road and Highway Design
VSN 45-68: Guidelines for Road and Highway Traffic Monitoring
VSN 47-68: Minavtoshosdor RSFSR Guidelines for the construction of small precast concrete bridges and rectangular pipes
VSN 4-81: Inspection Guidelines to Road Overpasses and Underpasses
VSN 490-87: Design and Installation of Pile Foundations and Sheet Pile Retaining Walls for Industrial Facility Rehabilitation and Urban Development
VSN 53-86(r): Rules for assessing the physical wear of residential buildings
VSN 58-88(r): Ordinance for Rehabilitation, Renovation, and Technical Inspection of Residential Occupancies, Public Utility Facilities, and Facilities Used for Amusement, Entertainment, and Recreation
VSN 59-88: Electrical Equipment for Residential and Public Buildings. Design Standards
VSN 60-89: Communications Devices, Alarm and Remote Control Systems for Building Services Equipment Used in Residential and Public Buildings. Design Standards
VSN 6-90: Requirements on Diagnostics and Assessment of the Condition of Roads and Highways
VSN 85-68: Technical Guidelines for the Design and Erection of Span Structures of Road and Urban Street Bridges with Pavement Constructed of Reinforced Concrete Slabs Without Applied Waterproofing
VSN 9-79: Instructions on taking into account the requirements of environmental protection and land use in the reconstruction of roads in the conditions of the Moldavian SSR
The Document is Referenced By:
Disposition 113-r: Typical solutions to restore the bearing capacity of the roadbed and to ensure the strength and frost resistance of road surfaces on the heaving sections of roads
Disposition IS-1146-r: Concept for improving the condition of bridge structures on the federal network of Russian highways (for the period 2002-2010)
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines
Letter 08-00-12/106: On the application of safety guidelines "Methods of assessment of consequences of accidents at chemical plants with explosion and fire hazard
Letter 12-50/6036-OG: About consideration of the appeal
Letter 14-00-09/1044: About the presence of a typo in the Safety Manual
Letter 14-00-09/274: On application of safety guidelines "Methodology of accident risk analysis at hazardous oil and gas production facilities
Letter 14-00-09/296: On application of safety guidelines "Methods of establishing acceptable accident risk in substantiating safety of hazardous oil and gas production facilities
Manual AV-22-r: Guidelines for technical diagnostics of road tunnels
MDS 11-21.2009: Method of determination of exact location and depth, as well as ruptures of underground utilities (power, signal cables, pipelines, gas, water, etc.) to prevent their damage during excavation
MGSN 3.01-01: Residential buildings
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MRR 9.10-17: Design of special construction methods
ODM 218.11.001-2015: Methodical recommendations about the accounting of increase in dynamic influence of loading in process of accumulation of roughnesses and to determination of coefficient of dynamism depending on a flatness indicator
ODM 218.2.013-2011: Guidelines for traffic noise protection for areas adjacent to roads
ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.020-2012: Guidelines for assessing the capacity of highways
ODM 218.2.028-2012: Methodical recommendations on the technical and economic comparison of pavement options
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.032-2013: Guidelines for accounting for the movement of vehicles on highways
ODM 218.2.033-2013: Guidelines for the implementation of engineering and geological surveys on landslide-prone slopes and slopes of roads
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials
ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.001-2007: Methodical recommendations on the technology of using the cadem-type surfactant additive Cadem-VT in the construction of asphalt concrete pavements
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
ODM 218.4.004-2009: Guidelines for the elimination and prevention of the occurrence of areas of concentration of road accidents during the operation of roads
ODM 218.5.006-2008: Guidelines for the use of environmentally friendly anti-icing materials and technologies in the maintenance of bridge structures
ODM 218.9.079-2016: Recommendations about design macrorough pavings
Order 48: On approval of the Safety Guide "Technique for technical diagnostics of gas reduction points"
Ordinance OS-754-r: On enactment of "Temporary Guidelines on the organization of the development of innovations in the design, construction, reconstruction, repair and maintenance of roads and road structures
RD 31.33.02-81: Guidelines for determination of wind and wave conditions in the design of seaports. Minmorflot. Soyuzmorniiproekt. 1981
RD 50:48:0075.05.07: Guidelines for the industrial safety expertise of buildings and structures with crane loads. Part I. General Provisions
RMD 50-06-2009 Sankt-Peterburg: Drainages in the design of buildings and structures
SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules
TR 168-05: Technical recommendations for the design, installation and operation of drainage from polyethylene pipes with filter sheath
TSN 30-304-2000: City of Moscow Planning and Development Code
TsPI 32: Technological guidelines for stabilization of the roadbed and ballast layer
VSN 137-89: Design, construction and maintenance of winter motor roads in Siberia and North-East of the USSR
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.