RD 153-34.1-43.106-2001
РД 153-34.1-43.106-2001
|
|
Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI
Типовая инструкция по приемке, хранению и эксплуатации огнестойких турбинных масел типа ОМТИ
Status: Not effective
This guidance document applies to synthetic fire-resistant synthetic turbine oils - OMTI, Reolube-OMTI and Reolube-OMTI-32, intended for use in the lubrication and control systems of turbine units and their auxiliary equipment, as well as in the shaft seal systems of generators of thermal power plants, and sets the rules for acceptance , storage and operation of oils, requirements for equipment, installation and repair work, safety requirements for the application of oils, as well as test methods for oils.
Настоящий руководящий документ распрос��раняется на масла турбинные огнестойкие синтетические - ОМТИ, Реолюбе-ОМТИ и Реолюбе-ОМТИ-32, предназначенные для использования в системах смазки и регулирования турбоагрегатов и их вспомогательного оборудования, а также в системах уплотнения вала генераторов тепловых электростанций, и устанавливает правила приемки, хранения и эксплуатации масел, требования к оборудованию, монтажным и ремонтным работам, требования техники безопасности при применении масел, а также методы испытаний масел.
Choose Language:
Format: Electronic (pdf/doc)
Approved: RAO UES of Russia,
6/29/2001
SKU: RUSS146912
The Product is Contained in the Following Classifiers:
Power industry »
43. Energy oils »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.16 Ensuring safety of working with flammable and combustible liquids »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
I Legal and organizational basis of labor protection »
3 Organization of labor protection at enterprise »
3.1 Development of rules and instructions on labor protection »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.040 Gas and steam turbines. Steam engines »
As a Replacement Of:
RD 34.43.106-90: Standard instructions for acceptance, storage and operation of OMTI fire-resistant turbine oil
The Document References:
GOST 11314-82: Commercial coal xylenols
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.4.122-83: Occupational safety standards system. All service canisters for protective masks. Specifications
GOST 12026-76: Filter paper for laboratory application
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 17216-2001: Industrial cleanliness. Grades of liquids purity
GOST 17216-71: Industrial purity
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 195-77: Reagents. Sodium sulphite. Specifications
GOST 199-78: Reagents. Sodium acetate 3-aqueous. Specifications
GOST 22867-77: Reagents. Ammonium nitrate. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 24363-80: Reagents. Potassium hydroxide. Specifications
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25664-83: Metol (para-methyl-aminophenol sulphate). Specifications
GOST 25828-83: Standard n-heptane. Specifications
GOST 2824-86: Electric insulating cardboard
GOST 28498-90: Liquid-in-glass thermometers
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3765-78: Reagents. Ammonium molibdate. Specifications
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 4198-75: Reagents. Potassium dihydrogen phosphate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 5789-78: Reagents. Toluene. Specifications
GOST 5841-74: Reagents. Hydrazine sulfate
GOST 5955-75: Reagents. Benzene. Specifications
GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 7995-80: Glass stopcocks. Specifications
GOST 902-76: Sodium bisulfite technical (water solution). Technical conditions
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications
RD 153-34.0-43.210-00: Turbine, Petroleum-Based, and Fireresistant Oils. Method for the Determination of Air Content of Oil by Volume
RD 153-34.1-43.211-2000: Fire and mineral turbine oils. Method for determination of deaerating properties and autoignition temperature
RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation
RD 34.43.102-96: Guidelines for Use of Petroleum-Based Turbine Oils
RD 34.43.106-90: Standard instructions for acceptance, storage and operation of OMTI fire-resistant turbine oil
RD 34.49.101-87: Design Guidelines for Fire Protection for Energy Facilities
The Document is Referenced By:
STO: Thermal power plants. Methods of assessing the condition of the main equipment
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.