National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components
Общесоюзные нормы технологического проектирования предприятий по производству минераловатных изделий и конструкций
Status: Not defined by law
All-Union norms of technological design are used in the development of projects for the construction of new, reconstruction, expansion or technical re-equipment of thermal insulation products and structures made of mineral wool obtained by the centrifugal method for melting raw materials in bath slag-receivers from fiery-liquid slags, as well as in cupolas.
Общесоюзные нормы технологического проектирования применяются при разработке проектов на строительство новых, реконструкцию, расширение или техническое перевооружение предприятий теплоизоляционных изделий и конструкций из минеральной ваты, получаемой центробежным способом при плавлении сырья в ванных печах-шлакоприемниках из огненно-жидких шлаков, а также в вагранках.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Ministry of Installation,
3/24/1986
SKU: RUSS147254
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Installation and special construction works »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.020 Processes in textile industry »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
The Document References:
GOST 10140-2003: Thermal insulating mineral wool slabs on bituminous binder. Specifications
GOST 10140-80: Thermal insulating mineral wool slabs on bituminous binder. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10585-75: Black oil fuel
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 10621-80: Self-tapping round-head screws for metals and plastics. Design and dimensions
GOST 10834-76: Hydrophobizing liquid 136-41. Specifications
GOST 10873-73: Ammonium sulfate (ammonium sulfate) purified. Technical conditions
GOST 10923-93: Ruberoid. Specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 13603-89: Twisted wire nettings with hexagonal meshes
GOST 13726-78: Aluminium and aluminium alloys strips. Specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 15542-79: Flame-proof mine power transformers. General specifications
GOST 15879-70: Glass ruberoid. Specifications
GOST 17139-2000: Textile glass. Roving. Specifications
GOST 17139-79: Roving of glass threads. Specifications
GOST 17308-88: Twines. Specifications
GOST 18051-83: Wooden containers for heat-insulating materials and products
GOST 18866-81: Crushed stone from blast-furnace slag for mineral wool
GOST 18866-93: Crushed blast furnace slag for mineral wool. Specification
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19170-2001: Fibre glass. Constructive woven fabrics. Specifications
GOST 19170-73: Constructive fabrics of glass twisted complex threads. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21880-86: Stitched mineral wool mats. Technical requirements
GOST 21880-94: Thermo insulating mineral wool broached mats. Specifications
GOST 22950-78: Mineral wool slads of higher rigidity on synthetic binder. Technical requirements
GOST 22950-95: Mineral wool slabs of higher rigidity on synthetic bond. Specifications
GOST 23208-2003: Thermoinsulating cylinders and semicylinders of mineral wool on synthetic binder. Specifications
GOST 23208-83: Thermoinsulating cylinders and half-cylinders of mineral wool on synthetic binder. Specifications
GOST 23307-78: Thermoinsulating mineral wool vertically-layered mats. Specifications
GOST 25880-83: Heat insulating construction materials and products. Packing, marking, transportation and storage
GOST 25951-83: Thermoshrinking polyethylene film. Specifications
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3340-88: Foundry coal coke
GOST 3560-73: Sealing tepe
GOST 4640-93: Mineral wool. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 5336-80: Single woven steel grids
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 6266-97: Gypsum plasterboards
GOST 6411-76: Heavy cylinder oils
GOST 6617-76: Petroleum construction bitumen
GOST 7376-89: Corrugated paperboard
GOST 7933-89: Cardboard for the retail containers
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8273-75: Packing paper
GOST 8325-78: Hass twisted complex threads. Specifications
GOST 8325-93: Textile glass. Twisted complex threads. Specifications
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9573-82: Thermal insulating mates of mineral wool on synthetic binder. Specifications
GOST 9573-96: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST 9-92: Technical-grade Aqueous ammonia
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 457-74: Norms of allotment of land for airports
SNiP 1.02.01-85: Instructions on the composition, procedure for the development, coordination and approval of design estimates for the construction of enterprises, buildings and structures
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.04.05-86: Heating, Ventilating, and Air Conditioning
SNiP II-12-77: Noise protection
SNiP II-90-81: Production buildings of industrial enterprises
SNiP II-92-76: Auxiliary buildings and premises of industrial enterprises
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.