ST SEV 543-77
СТ СЭВ 543-77
|
|
Numbers. Requirements for Notation and Rounding Off
Числа. Правила записи и округления
Status: Effective
The CMEA standard establishes the rules for recording and rounding numbers expressed in decimal notation. The rules for recording and rounding numbers set forth in this standard of the CMEA are intended for use in regulatory, design and technological documentation. The CMEA standard does not apply to special rounding rules established in other CMEA standards.
Стандарт СЭВ устанавливает правила записи и округления чисел, выраженных в десятичной системе счисления. Правила записи и округления чисел, установленные в настоящем стандарте СЭВ, предназначены для применения в нормативно-технической, конструкторской и технологической документации. Стандарт СЭВ не распространяется на специальные правила округления, установленные в других стандартах СЭВ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
1/1/1977
SKU: RUSS147391
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
PromExpert »
SECTION I. TECHNICAL REGULATION »
II Standardization »
1 Basic provisions of standardization system »
ISO classifier »
07 MATHEMATICS. NATURAL SCIENCES »
07.020 Mathematics »
National standards »
07 MATHEMATICS. NATURAL SCIENCES »
07.020 Mathematics »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T1 Math »
T10 General Mathematics Questions »
The Document is Referenced By:
GOST 10025-2016: Tin-phosphor bronze rods. Specifications
GOST 10089-89: Coal coke. Method for measurement of reactivity
GOST 10155-2016: Manganin uninsulated wire. Specification
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 1048-2016: Strips of aluminium bronze for springs. Specifications
GOST 1049-2015: Manganese nickel wire. Specifications
GOST 1066-2015: Brass wire. Specifications
GOST 10749.3-80: Ethyl alcohol for industrial use. Method for determination of carbonyl compounds
GOST 10749.4-80: Ethyl alcohol for industrial use. Method for determination of alkali
GOST 10749.5-80: Ethyl alcohol for industrial use. Method for determination of acids
GOST 10749.6-80: Ethyl alcohol for industrial use. Method for determination of esters
GOST 10749.7-80: Ethyl alcohol for industrial use. Method for determination of sulphur
GOST 10749.9-80: Ethyl alcohol for industrial use. Method for determination of dry residue
GOST 10854-2015: Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 10988-2016: Oxygen-free copper bars for electrovacuum industry. Specifications
GOST 11365-75: Nitrophoska
GOST 1150-2018: Boiler zinc plates. Specifications
GOST 12920-2013: Brass wire for cold upsetting
GOST 13047.1-2002: Nickel. Cobalt. General requirements for methods of analysis
GOST 13047.1-2014: Nickel. Cobalt. General requirements for methods of analysis
GOST 13056.6-97: Seed of trees and shrubs. Methods for determination of germination
GOST 13056.8-97: Seed of trees and shrubs. Methods for determination of high quality
GOST 13073-2018: Zinc wire.Technikal requirements. Specifications
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification
GOST 14657.0-78: Bauxite. General requirements for methods of chemical analysis
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 15136-2020: Refractory products. Methods for measuring the depth of bumping of corners and edges
GOST 1535-2016: Copper rods. Specifications
GOST 15471-2014: Ribbons and strips made of oxygen-free copper for electronics. Specifications
GOST 15515-2016: Nickel electrolyzed strips. Specifications
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 15834-2016: Beryllium bronze wire. Specification
GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 1628-2019: Bars are bronze. Technical conditions
GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions
GOST 16680-79: Processed kaolin. Method of brightness measurement
GOST 167-2018: Lead tubes. Specifications
GOST 17038.1-79: Ionizing radiation scintillation detectors. Methods for measurement of non-linearity and instability of installation for determination of scintillation detector parameters
GOST 17038.2-79: Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of full absorption peak or common distribution edge
GOST 17038.3-79: Ionizing-radiation scintillation detectors. Method for measurement of detector light yield of photomultiplier anode current
GOST 17038.4-79: Ionizing-radiation scintillation detectors. Method for measurement of relative scintillator efficiency
GOST 17038.5-79: Ionizing-radiation scintillation detectors. Method for measurement of photomultiplier spectrometric constant used for detector scintillation parameter determination
GOST 17038.6-79: Ionizing-radiation scintillation detectors. Method for measurement of intrinsic and given detector resolution
GOST 17038.7-79: Ionizing-radiation scintillation detectors. Methods for measurement of effective light attenuation index of scintillation in detector
GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1789-2013: Beryllium bronze strips and tapes. Specifications
GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification
GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.
GOST 18327-2018: Zinc strips for general use. Specifications
GOST 18394-2016: Tin plated lead and tin foil. Specifications
GOST 18846-2018: Zinc foil. Specifications
GOST 19241-2016: Wrought nickel and fow-alloy nickel. Grades
GOST 19241-80: Wrought nickel and low-alloy nickel. Grades
GOST 19283-93: Microtalc. Methods for determination of dispersion composition
GOST 19347-2014: Copper sulfate. Technical conditions
GOST 19522-74: Ammonium Rodanist technical. Technical conditions
GOST 20707-2015: Copper and brass ribbons for radiators. Specifications
GOST 20996.0-2014: Selenium technical. General requirements for methods of analysis
GOST 2169-69: Silicon technical. Specifications
GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications
GOST 2179-2015: Nickel and siliceous nickel wire. Specifications
GOST 2205-2016: L-90 tapes and strips for plating. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22306-77: Metals of high and special purity. General requirements for methods of analysis
GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications
GOST 23963-86: Magnetic tapes for domestic sound recording. General specifications
GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications
GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications
GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis
GOST 25371-82: Petroleum products. Methods for calculating viscosity index
GOST 25542.0-93: Alumina. General requirement for methods of chemical analysis
GOST 25905-2018: Aluminium foil for condensers. Specifications
GOST 26178-84: Reference tapes. Testing methods of physico-mechanical properties
GOST 26876-86: Cemented carbides. General requirements for methods of chemical analysis
GOST 26955-86: Agricultural mobile machinery. Rates of force produced by propelling agents on soil
GOST 2771-81: Cold-drawn round wire. Gauge
GOST 28419-97: Grain. Method for determination of foreign matter and grain impurities content using analyser УI-EAS-M
GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications
GOST 30305.1-95: Evaporated and sweetened condensed dairy products. The procedures of measurement of moisture content
GOST 30305.2-95: Sweetened condensed preserved and dry milk products. Procedure of measurement of saccharose content
GOST 30305.3-95: Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
GOST 30305.4-95: Dry dairy products. The procedure of measurement of solubility index
GOST 30483-97: Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles
GOST 30559-98: Alumina, nonmetallurgical. Specifications
GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces
GOST 31382-2009: Copper. Methods of analysis
GOST 31964-2012: Macaroni products. Acceptance rules and methods of quality determination
GOST 32196-2013: Gluten-free macaroni products. Enzyme immunoassay method for determination of gluten
GOST 32197-2013: Macaroni products. Methods for determining the colour and darkening on three coordinate colorimeter
GOST 32221-2013: Copper concentrates. Methods of analysis
GOST 32582-2013: Plain aluminum foil web for packing of food products for household purposes. Specifications
GOST 32691-2014: Public catering service. Method of elaborating and approving of house specialties at public catering enterprises
GOST 444-2016: Flotation sulphur pyrite. Specifications
GOST 4442-2014: Bands and strips of lead brass. Specifications
GOST 4752-2012: Cylinder copper wire. Specifications
GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades
GOST 5017-2006: Wrought tin bronzes. Grades
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5189-2018: Constantan strips. Specifications
GOST 5220-2018: Germen silver wire. Specifications
GOST 5221-2008: Tin-zink bronze wire. Specifications
GOST 5222-2016: Silicon-manganese bronze wire. Specifications
GOST 5307-2015: Constantan uninsulated wire. Specifications
GOST 5362-2018: Brass ribbons. Specifications
GOST 5638-2018: Copper roil foil for technical purposes. Specifications
GOST 598-2020: General purpose zinc sheets. Specifications
GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.
GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 618-2014: Aluminum foil for technical purposes. Specifications.
GOST 6235-2020: Nickel sheets and strips. Specifications
GOST 745-2014: Aluminium foil for packing. Specifications
GOST 767-2020: Copper anodes. Specifications
GOST 8036-2013: Strips of brass Л90. Specifications
GOST 849-2018: Primary nickel. Specifications
GOST 859-2001: Copper. Grades
GOST 859-2014: Copper. Grades
GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 8776-99: Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 89-2018: Rolled-in lead sheets. Specifications
GOST 9816.0-2014: Tellurium technical. General requirements for methods of analysis
GOST 9816.0-84: Technical tellurium. General requirements for methods of analysis
GOST R 50814-95: Meat products. Methods of penetration determination by means of the cone and the needle indentor
GOST R 51174-98: Beer. General specifications
GOST R 52377-2005: Macaroni products. Acceptance rules and methods of quality determination
GOST R 52599-2006: Precious metals and their alloys. General requirements for methods of analysis
GOST R 52998-2008: Copper concentrate. Specifications
GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST R 53405-2009: Copper cylinder wire. Specifications
GOST R 53439-2009: Brass wire for cold upsetting. Specifications
GOST R 53499-2009: Tombac strips. Specifications
GOST R 53803-2010: Copper rod for electrical purposes. Specifications
GOST R 53996-2010: Public catering service. Method of elaborating and approving of house specialties at public catering enterprises
GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications
GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte
GOST R 55685-2013: Blister copper. Methods of analysis
GOST R 55917-2013: Nickel and copper-nickel alloys wire for extension leads for thermoelectric temperature transducers. Specifications
GOST R 56240-2014: Copper. Spectral methods of impurity analysis
GOST R 56754-2015: Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 56859-2022: Copper and polymetallic ores and products of their processing. Methods of measurement of the mass fraction of gold and silver
GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations
GOST R 58466-2019: Ores copper-iron-vanadium and iron-vanadium commodity unenriched. Technical specifications
GOST R 58605-2019: Mines apatite-nepheline mined. Technical specifications
GOST R 58821-2020: Phosphogypsum. Acceptance rules, sampling, transportation and storage
MI 2578-2003: State system for ensuring the uniformity of measurements. Method of measurement of natural gas in the Moscow region by measurement systems based on orifice with registration of measurement results on the charts recording instruments and the use of these r
RD 50-290-81: Procedural Guidelines. Instruments for Analysis of Sulfur Content in Oil. Verification Methods and Means
RD 50-292-81: Guidelines. Dilcometric oil hydrometers. Methods and means of verification
RD 50-294-81: Guidelines. Vibration density meter. Methods and means of verification
RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination
SO 34.26.722: Guidelines for testing steam boiler superheaters
ST SEV 4887-84: Technical acid casein. Method for determination of lactose mass fraction
ST SJeV 4181-83: Doors are wooden. Flatness Method
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.