RD 12-331-99
РД 12-331-99
|
|
Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
Положение по проведению экспертизы промышленной безопасности на объектах газоснабжения
Status: Not effective - Superseded
The published position specifies the procedure and area of analytical research during the examination of industrial safety of project documentation; summarizes the requirements of regulatory and methodological documents on the procedure for the examination of industrial safety of technical devices; The provision contains a list of regulatory documents, on the compliance of the requirements of which the examination is carried out. This provision is intended for employees of the Gosgortekhnadzor system of Russia, managers and specialists of expert organizations, and such organizations controlled by Gosgortechnadzor of Russia operating hazardous production facilities.
Публикуемое положение конкретизирует порядок и область аналитических исследований при проведении экспертизы промышленной безопасности проектной документации; обобщает требования нормативных и методических документов по порядку проведения экспертизы промышленной безопасности технических устройств; в положении дан перечень нормативных документов, на соответствии требований которых проводится экспертиза. Данное положение предназначено для работников системы Госгортехнадзора России, руководителей и специалистов экспертных организаций, а такие подконтрольных Госгортехнадзору России организаций, эксплуатирующих опасные производственные объекты.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
12/14/1999
SKU: RUSS147778
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
7 Examination and declaration of industrial safety »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.40 Gas supply systems »
The Document is Replaced With:
RD 12-608-03: Provisions on industrial safety expertise implementation at gas supply entities.
The Document References:
Federal Law 69-FZ: Fire Safety
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 10798-85: Domestic gas gangec. General specifications
GOST 11032-80: Household gas storage water heaters
GOST 11933-78: Two-disc wedge gate valves with non-sliding spindle are flanged cast iron for gas pipelines on Pd approximately equal to 0.6 MPa (6 kgf / cm2) and Pd approximately 1.0 MPa (10 kgf / cm2). Specification
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.011-78: Explosive mixtures. Classification and test methods
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12532-88: Direct-acting safety valves. Main parameters
GOST 12678-80: Direct-acting pressure regulators. Main parameters
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 12893-83: Single-seated, double-seated and cage control valves.
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16569-86: Burners for domestic gas heaters
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 2.601-95: Operational documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 2.603-68: Unified system for design documentation. Rules of modification in maintenance and repair documentation
GOST 2.604-68: Unified system for design documentation. Repairing drawings
GOST 2.605-68: Unified system for design documentation. Technical educational placards. General technical requirements
GOST 2.608-78: Unified system for design documentation. Order of listing of data for precious materials in operational documentation
GOST 20448-90: Liquefied hydrocarbon fuel gases for domestic use. Specifications
GOST 20548-87: Heating hot-water boilers with heating outputs
GOST 21.610-85: System of building design documents. Gas supply. Outside gas pipe-lines. Working drawings
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 22387.5-77: Gas for households and public utilities. Methods of determining of odor intensity
GOST 22985-90: Liquefied hydrocarbon gases. Method for determination of hydrogen sulphide and mercaptan
GOST 23541-79: Devices for route search. General technical requirements, acceptance rules and test methods
GOST 25696-83: Gas infrared radiant torches
GOST 27441-87: Gas apparatuses for thermal treatment of food for the plants of public catering classification, general technical requirements and test methods
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 3619-89: Stationary steam boilers
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
Manual for SNiP 2.01.01-82: Reference manual to SNiP. Construction climatology and geophysics
NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard
ONTP 24-86/MVD SSSR: Definition of categories of premises and buildings by explosion and fire hazard
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-246-98: Rules for audit of industrial safety
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 12-245-98: Safety Requirements for Gas Supply Facilities
PPB 01-93*: Fire Safety Rules in the Russian Federation
RD 03-129-96: Procedure for Development of a Safety Declaration for a Facility in the Russian Federation
RD 03-298-99: Statute on procedure for approval of industrial safety appraisal statements
RD 08-120-96: Methodological Guidelines For Risk Analysis Related To Hazardous Facilities
RD 10-16-92: Procedural Guidelines for the Inspection of Facilities with Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot-Water Piping
RD 12-88-95: Instruction on the procedure of issuing the permission by (No Suggestions) of Russia for the manufacture and application of equipment for gas industry of Russian federation
Resolution: Rules for the design and safe operation of steam and hot water boilers
SNiP 1.02.01-85: Instructions on the composition, procedure for the development, coordination and approval of design estimates for the construction of enterprises, buildings and structures
SNiP 1.06.05-85: Regulation on construction design supervision of enterprises, buildings and installation by design organizations
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-01-95: Instructions on the procedure of elaboration, coordination, approval, and composition of design documentation for construction of enterprises, buildings, and structures
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.04.09-84: Automatic fire protection systems
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 2.09.03-85: Structures for industrial installations
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
The Document is Referenced By:
RD 12-608-03: Provisions on industrial safety expertise implementation at gas supply entities.
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.