RD 10-112-96
РД 10-112-96
|
|
Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 1: General Provisions
Методические указания по обследованию грузоподъемных машин с истекшим сроком службы. Утв. Госгортехнадзором России 28.03.96 г.
Status: Effective
This document was prepared in accordance with the Rules for the Construction and Safe Operation of Cranes, approved by the Gosgortekhnadzor of Russia on 12/30/92, and the Rules for the Construction and Safe Operation of elevators (towers), approved by the GosGorTechnadzor of Russia on November 19, 1992, establishes general requirements for the frequency, organization and methods for inspecting machines with an expired standard service life to determine the possibility of their further operation and applies to organizations that have load-lifting machines on their balance s, as well as organizations that carry out inspection of lifting machines.
Настоящий документ подготовлен в соответствии с Правилами устройства и безопасной эксплуатации грузоподъемных кранов, утвержденными Госгортехнадзором России 30.12.92, и Правилами устройства и безопасной эксплуатации подъемников (вышек), утвержденными Госгортехнадзором России 19.11.92, устанавливает общие требования к периодичности, организации и методам обследования машин с истекшим нормативным сроком службы для определения возможности их дальнейшей эксплуатации и распространяется на организации, имеющие на балансе грузоподъемные машины, а также на организации, осуществляющие обследование грузоподъемных машин.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
3/28/1996
SKU: RUSS148388
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.13. Lifting facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
6 Requirements for organizations infield of industrial safety »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.01 Lifting equipment in general »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document is Replaced With:
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
The Document References:
GOST 1451-77: Hoisting cranes. Wind load. Norms and methods of determination
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
PB 10-611-03: Installation and safe operation of hoists (towers)
RD 10-49-94: Instructions for the Issue of Special Permits (Licenses) for Activities Connected With Safety Provision for Boiler Inspection Items and Lifting Structures
The Document is Referenced By:
ERD 22-02-99: Guide to Operating Condition Assessment of Steel Crane Support Structures
MU 22-28-05-99: Evaluation of the residual life of the cranes. Methodical instructions
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
RD 03-348-00: Methodological guidelines for magnetic inspection of steel ropes. Basic provisions.
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 10-112-2-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 2: Self-Propelled General-Purpose Boom Cranes
RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes
RD 10-112-5-97: Methodological guidelines on inspection of hoisting equipment with expired service life. Part 5: Bridge and frame cranes.
RD 10-112-6-03: Guidelines for the inspection of special metallurgical cranes
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 24-112-4R: Guidelines for the assessment of the residual life of gantry cranes
RD 24-112-5R: Guidance Document for Estimating the Residual Life of Bridge Cranes
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points
RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
