RD 153-34.0-11.209-99
РД 153-34.0-11.209-99
|
|
Recommended Practice. Automated Electric Energy and Power Monitoring and Metering Systems. Standard Method for Measurements of Electric Energy and Power
Рекомендации. Автоматизированные системы контроля и учета электроэнергии и мощности. Типовая методика выполнения измерений электроэнергии и мощности
Status: Effective
The document applies to the developed and revised methods of measuring electricity and power, carried out using existing or newly constructed and reconstructed power plants and substations of RAO UES of Russia and AO-Energo automated measuring systems designed for: control and metering of electricity and power; settlement (commercial) and technical (control) accounting of electricity and power; control and management of electricity consumption and sales; including using the automated system for commercial accounting of power consumption, with the help of which the obtained measurement results are taken into account for carrying out trade operations and mutual settlements between the seller (power supply organization) and the buyer (subscriber) of electricity and power in accordance with art. 13 of the RF Law on ensuring the uniformity of measurements. Typical MVI establishes general provisions and requirements for the construction, content and presentation of documents regulating MVI of active and reactive electricity and power at power facilities. This Typical MVI takes into account the requirements and basic provisions of GOST R 8.563-96. Typical MVI is recommended for personnel of power facilities, design organizations and consumers. Typical MVI does not apply to AMR, for which the metrological characteristics are not normalized under known operating conditions of use in stationary mode of equipment operation.
Документ распространяется на разрабатываемые и пересматриваемые методики выполнения измерений электроэнергии и мощности, проводимые с использованием действующих или вновь сооружаемых и реконструируемых на электростанциях и подстанциях РАО «ЕЭС России» и АО-энерго автоматизированных измерительных систем, предназначенных для: контроля и учета электроэнергии и мощности; расчетного (коммерческого) и технического (контрольного) учета электроэнергии и мощности; контроля и управления потреблением и сбытом электроэнергии; в том числе с использованием АСКУЭ, с помощью которых полученные результаты измерений учитывают для проведения торговых операций и взаимных расчетов между продавцом (энергоснабжающей организацией) и покупателем (абонентом) электроэнергии и мощности в соответствии со ст. 13 Закона РФ об обеспечении единства измерений. Типовая МВИ устанавливает общие положения и требования к построению, содержанию и изложению документов, регламентирующих МВИ активной и реактивной электроэнергии и мощности на энергообъектах. Настоящая Типовая МВИ учитывает требования и основные положения ГОСТ Р 8.563-96. Типовая МВИ рекомендуется для персонала энергообъектов, проектных организаций и потребителей. Типовая МВИ не распространяется на АСКУЭ, для которых не нормируют метрологические характеристики в известных рабочих условиях применения в стационарном режиме работы оборудования.
Choose Language:
Format: Electronic (pdf/doc)
Approved: RAO UES of Russia,
7/21/1999
SKU: RUSS149171
The Product is Contained in the Following Classifiers:
Power Industry »
11. Metrology »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of energy facilities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
The Document References:
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 1983-89: Voltage transformers
GOST 22261-94: Measuring instruments for electrical
GOST 26035-83: Electronic meters of an alternating-current electricity
GOST 26104-89: Electronic measurement instruments
GOST 30206-94: Alternating current static watt-hour meters for active energy ( accuracy classes 0,2 S and 0,5 S)
GOST 30207-94: Alternating current static watt-hour meters for active energy (accuracy classes 1 and 2)
GOST 6570-75: Electrical induction active and reactive energy meters. General technical specifications
GOST 6570-96: Electrical induction active and reactive energy meters
GOST 7746-2001: Current transformers. General specifications
GOST 7746-89: Current transformers. General specifications
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
RD 34.09.101-94: Standard instruction for metering electricity in its production, transmission and distribution
RD 34.11.321-96: Standards for Error in Measurement of Process Parameters of Thermal Power Stations and Substations
SO 153-34.11.325-90: Procedural Guidelines for the Determination of Error in Measurement of Active Electric Power During Generation and Distribution
The Document is Referenced By:
MI 2808-2003: Recommendation. State system for ensuring uniformity of measurements. The amount of electrical energy. Measurement technique for the distribution of unbalances in the wholesale electricity market
MI 3022-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring current transformers
MI 3023-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring voltage transformers
MI 3195-2009: Recommendation. State system for ensuring uniformity of measurements. Load power voltage transformers, the method of measurement without disconnecting circuits
MI 3196-2009: Recommendation. State system for ensuring uniformity of measurements. Secondary load current transformers. The method of measurement without disconnecting the circuit
RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.
RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
