RD 10-117-95
РД 10-117-95
|
|
Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
Требования к устройству и безопасной эксплуатации рельсовых путей козловых кранов
Status: Not effective - No longer valid. By the order of Rostekhnadzor No. 163 dated 04/22/2014, the resolution of the Gosgortekhnadzor No. 41 dated 08/08/1995 was declared invalid.
Standards regulate the procedure and standards for the design, construction and operation of rail tracks of gantry cranes with vertical load from a wheel on a rail to 325 kN according to GOST 27584 operation mode groups from 1K to 8K according to GOST 25546. Requirements apply to rail tracks with wooden and reinforced concrete half-ties, also on the way with longitudinal reinforced concrete rail support elements (plates, beams and monolithic reinforced concrete bases).
Нормы регламентируют порядок и нормы проектирования, устройства и эксплуатации рельсовых путей козловых кранов с вертикальной нагрузкой от колеса на рельс до 325 кН по ГОСТ 27584 групп режима работы от 1К до 8К по ГОСТ 25546. Требования распространяются на рельсовые пути с деревянными и железобетонными полушпалами, а также на пути с продольными железобетонными подрельсовыми опорными элементами (плиты, балки и монолитные железобетонные основания).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
8/8/1995
SKU: RUSS149378
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.13. Lifting facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document References:
GOST 10528-90: Geodetic levels
GOST 10529-96: General specifications
GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications
GOST 11530-93: Rail joint bolts. Specifications
GOST 11532-93: Nuts for rail joints. Specifications
GOST 12.4.026-76: Signal colors and safety signs
GOST 12135-75: The plates of spike fastening for railway P50 rails. Design and dimensions
GOST 13837-79: General purpose dynamometers
GOST 1451-77: Hoisting cranes. Wind load. Norms and methods of determination
GOST 16017-79: Inserted bolts for rail track fastenings.
GOST 166-89: Vernier callipers. Specifications
GOST 19128-73: Double-headed fish plates for P50 rails. Design and dimensions
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
GOST 19912-81: Soils. Field test method by dynamic sounding
GOST 20069-81: Soils. Field test method by static sounding
GOST 23407-78: Fencings for building sites. Specifications
GOST 25546-82: Hoisting cranes. Work conditions
GOST 25706-83: Magnifiers
GOST 25835-83: Lifting capacity cranes. Duty classifications of mechanisms
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5812-82: Tie-cotters for broad gage railway
GOST 7173-54: Railway rails type Р43 for industrial conveyance and hoisting lines. Construction and dimensions
GOST 7174-75: Railway rails type Р50. Construction and dimensions
GOST 7392-2002: Crushed stone of solid rocks for railway ballast. Specifications
GOST 7392-85: Crushed natural stone for railway ballast. Specifications
GOST 7394-85: Gravel and sandy-gravel ballast for railway track. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 78-2004: Wooden sleepers for full gauge railways. Specifications
GOST 78-89: Wooden sleepers for railways of full gauge. Specifications
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 809-71: Track wood screws. Specifications
GOST 8161-75: Railway rails type Р65. Construction and dimensions
GOST 8193-73: Double headed fish plates for Р65, Р75 rails. Design and dimensions
GOST 8486-86: Coniferous sawn timber. Specifications
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51685-2000: Railway rails. General specifications.
GOST R ISO 7378-93: Fasteners. Bolts, screws and studs. Split pin holes and wire holes
PB 10-14-92: Codes for installation and safe operation of lifting cranes
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
The Document is Referenced By:
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 225.1326000.2014: Station buildings, structures and devices
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.