RD 34.03.204
РД 34.03.204
|
|
Safety rules when working with tools and accessories
Правила безопасности при работе с инструментом и приспособлениями
Status: Reference materials, MP, TPR
The document sets out the basic safety rules when working with the use of lifting mechanisms, tools and accessories. For engineering and technical personnel producing maintenance, construction, installation and commissioning work at enterprises and organizations of the Ministry of Energy of the Russian Federation and at enterprises of municipal energy of Russia.
В документе изложены основные правила безопасности при работе с применением грузоподъемных механизмов, инструмента и приспособлений. Для инженерно-технического персонала, производящего ремонтно-эксплуатационные, строительные, монтажные и наладочные работы на предприятиях и в организациях Минэнерго Российской Федерации и на предприятиях коммунальной энергетики России.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Energy of the Russian Federation,
3/27/1991
SKU: RUSS149714
The Product is Contained in the Following Classifiers:
Power industry »
03. Labor protection. Production safety »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of State Energy Supervision »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
The Document References:
GOST 10293-77: Nylon ropes. Specification
GOST 1050-74: High-grade constructional carbon steel
GOST 1088-71: Sisal ropes. Specification
GOST 11384-75: Blacksmith's hand and hammer tools. Flat cross-longitudinal cutting pliers. Design and dimensions
GOST 11385-75: Blacksmith's hand and hammer tools. Flat nose pliers. Design and dimensions
GOST 11386-75: Blacksmith's hand and hammer tools. Crosscutting round nose calliper type pliers. Design and dimensions
GOST 11387-75: Blacksmith's hand and hammer tools. Crosscutting semi-round nose pliers. Design and dimensions
GOST 11388-75: Blacksmith's hand and hammer tools. Crosscutting square nose pliers. Design and dimensions
GOST 11389-75: Blacksmith's hand and hammer tools. Double-beak anvils. Design and dimensions
GOST 11390-75: Blacksmith's hand and hammers tools. Longitudinal cutting round nose pliers. Design and dimensions
GOST 11391-75: Blacksmith's hand and hammer tools. Longitudinal cutting square nose pliers. Design and dimensions
GOST 11392-75: Blacksmith's hand and hammer tools. Longitudinal-cutting rectangular nose pliers. Design and dimensions
GOST 11393-75: Blacksmith's hand and hammer tools. Auxiliary pliers for cylindrical bars. Design and dimensions
GOST 11394-65: Blacksmith's hand and hammer tools. Auxiliary pliers rectangular bars. Design and dimensions
GOST 11395-75: Blacksmith's hand and hammer tools. Auxiliary pliers. Design and dimensions
GOST 11396-75: Blacksmith's hand and hammer tools. Metal tool handles. Design and dimensions
GOST 11397-75: Blacksmith's hand and hammer tools. Beakless anvils. Design and dimensions
GOST 11398-75: Blacksmith's hand and hammer tools. Single-beak anvils. Design and dimensions
GOST 11399-75: Blacksmith's hand and hammer tools. Double-beak anvils. Design and dimensions
GOST 11400-75: Blacksmith's hand and hammer tools. Single-beak console type anvils. Design and dimensions
GOST 11401-75: Blacksmith's hand and hammer tools. Stakes. Design and dimensions
GOST 11402-75: Blacksmith's hand and hammer tools. Chamfered nose sledge hammers. Design and dimensions
GOST 11403-75: Blacksmith's hand and hammer tools. Pointed sledge hammers. Design and dimensions
GOST 11404-75: Blacksmith's hand and hammer tools. Round top swages. Design and dimensions
GOST 11405-75: Blacksmith's hand and hammer tools. Round bottom swages. Design and dimensions
GOST 11406-75: Blacksmith's hand and hammer tools. Angular bottom swages. Design and dimensions
GOST 11407-75: Blacksmith's hand and hammer tools. Square top set hammers. Design and dimensions
GOST 11408-75: Blacksmith's hand and hammer tools. Rectangular bottom set hammers. Design and dimensions
GOST 11409-75: Blacksmith's hand and hammer tools. Semi-round top set hammer. Design and dimensions
GOST 11410-75: Blacksmith's hand and hammer tools. Semi-round bottom set hammer. Design and dimensions
GOST 11411-75: Blacksmith's hand and hammer tools. Fitting tools. Design and dimensions
GOST 11412-75: Blacksmith's hand and hammer tools. Bottom swages for bending. Design. And dimensions
GOST 11413-75: Blacksmith's hand and hammer tools. Flat flatters. Design and dimensions
GOST 11414-75: Blacksmith's hand and hammer tools. Semi-round flatters. Design and dimensions
GOST 11415-75: Blacksmith's hand and hammer tools. Round punches. Design and dimensions
GOST 11416-75: Blacksmith's hand and hammer tools. Oval punches. Design and dimensions
GOST 11417-75: Blacksmith's hand and hammer tools. Square punches. Design and dimensions
GOST 11418-75: Blacksmith's hand and hammer tools. Chisels. Design and dimensions
GOST 11419-75: Blacksmith's hand and hammer tools. Shaped chisels. Design and dimensions
GOST 11420-75: Blacksmith's hand and hammer tools. Straight hardies. Design and dimensions
GOST 11421-75: Blacksmith's hand and hammer tools. Semi-round expansion tools. Design and dimensions
GOST 11422-75: Blacksmith's hand and hammer tools. V-expansion tools. Design and dimensions
GOST 11423-75: Blacksmith's hand and hammer tools. Round nicking tools. Design and dimensions
GOST 11424-75: Blacksmith's hand and hammer tools. Triangular nicking tools. Design and dimensions
GOST 11425-75: Blacksmith's hand and hammer tools. Triangular equilateral nicking tools. Design and dimensions
GOST 11426-75: Blacksmith's hand and hammer tools. Round spring swages. Design and dimensions
GOST 11427-75: Blacksmith's hand and hammer tools. Round split swages. Design and dimensions
GOST 11428-75: Blacksmith's hand and hammer tools. V-blocks. Design and dimensions
GOST 11429-75: Blacksmith's hand and hammer tools. Two-sided afes. Design and dimensions
GOST 11430-75: Blacksmith's hand and hammer tools. One-sided axes. Design and dimensions
GOST 11431-75: Blacksmith's hand and hammer tools. Trapezoidal axes. Design and dimensions
GOST 11432-75: Blacksmith's hand and hammer tools. Semi-round axes. Design and dimensions
GOST 11433-75: Blacksmith's hand and hammer tools. Burring chisels. Design and dimensions
GOST 11434-75: Blacksmith's hand and hammer tools. Eyes for wooden tool handles. Design and dimensions
GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.8-75: Devices for electric welding and plasma treatment
GOST 12.2.007.9-88: Electrothermal equipment
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.2.009-80: Metalworking machines
GOST 12.2.010-75: Occupational safety standards system. Pneumatic Hand Machines. General safety requirements
GOST 12.2.013-75: Occupational safety standards system. Electric hand-held tools. General safety requirements
GOST 12.2.013-87: Occupational safety standards system. Electric hand-held tools. General safety requirements and methods of tests
GOST 12.2.017-86: Occupational safety standards system. Forging and pressing equipment. General safety requirements
GOST 12.2.026.0-77: Occupational safety standards system. Wood working equipment. General safety construction requirements
GOST 12.2.026.11-81: Occupational safety standards system. Wood working equipment. Circular saws. Safety requirements
GOST 12.2.026.13-81: Occupational safety standards system. Wood working equipment. Lathes and ronding machines. Safety requirements
GOST 12.2.026.17-82: Occupational safety standards system. Wood working equipment. Vertical log band sawing machines. Safety requirements for design
GOST 12.2.026.2-80: Occupational safety standards equipment. Planing machines. Safety requirements for construction
GOST 12.2.026.3-80: Occupational safety standards system. Wood working equipment. Shapers. Safety requirements for construction
GOST 12.2.026.4-80: Occupational safety standards system. Wood working equipment. Drilling machines and mortisers. Safety requirements
GOST 12.2.026.5-80: Occupational safety standards system. Wood-working equipment. Tenoning machines. Safety requirements
GOST 12.2.026.7-80: Occupational safety standards system. Wood working equipment. Sanding machines. Safety requirements for construction
GOST 12.2.029-88: Machine tool attachments
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.054-81: Acetylene installations
GOST 12.2.060-81: Acetylene pipelines
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.029-76: Special aprons
GOST 12.4.035-78: Protective face shields
GOST 12.4.040-78: Industrial equipment controls
GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications
GOST 12.4.107-82: Occupational safety standards system. Building. Safety ropes. General safety requirements
GOST 12634-80: Pneumatic grinding manual machines. Specification
GOST 13861-89: Pressure regulators for the flame machining
GOST 14651-78: Electrode holders for manual arc welding
GOST 16519-78: Portable tools. Methods for measurement of parameters of vibration
GOST 1765-89: Linen cords and ropes. Specifications
GOST 1868-88: Ropes for industrial and household use. Specification
GOST 191-82: Loading leaf chains
GOST 19822-88: Industrial container. Specifications
GOST 21963-82: Cutoff wheels
GOST 2270-78: Abrasive tool. Main dimensions of fixing elements
GOST 228-79: Anchor chains
GOST 2297-70: Cords, technical, special, of cotton
GOST 23182-78: Grinding wheels for hand-held grinders
GOST 2424-83: Grinding wheels
GOST 24258-88: Different types of scaffolding. General specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 27321-87: Demountable tubular scaffold for construction works. Specification.
GOST 27595-88: Grinding materials and abrasive tools. Packing, marking, transportation and storage
GOST 28012-89: Demountable travelling stage. Specifications
GOST 3241-91: Steel ropes
GOST 380-88: Common quality carbon steel. Grades
GOST 483-75: Hemp ropes. Specification
GOST 588-81: Hauling leaf chains
GOST 7399-80: Connective wires and cords for voltages up to 450 v
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8556-72: Portable wood fire ladders
GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications
GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications
GOST 9462-88: Round timber of broadleaf sorts
GOST 9463-88: Round wood products
GOST 977-88: Steel castings. General specifications
GOST R 50209-92: Vibration. Requirements for means of testing mechanical hammers
OST 21-6-87: Occupational safety standards system. Glass lighting filters for eye protection against harmful radiation at production. Specifications.
SNiP II-4-79: Natural and artificial lighting
The Document is Referenced By:
GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification
MDK 4-02.2001: Model Guidelines for Operation of Piped Heat Supply Networks of Public Piped Heat Supply Systems
MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
RD 153-34.0-20.608-2003: Guidelines. Project work for the repair of power equipment power plants. Requirements for the composition, content and design
RD 153-34.3-20.662-98: Model Guidelines for Maintenance of and Repair of Overhead Electric Power Transmission Lines at Voltage of 0.38-20 kV with Uninsulated Conductors
RD 34.03.230: Model Occupational Safety and Health Guidelines for the Electrician for Repair of Overhead Electric Power Transmission Lines
RD EO 1.1.2.01.0480-2009: Regulations on accreditation and audit of organizations for performance of work, provision of services for the repair of nuclear power plants of Energoatom Concern OJSC
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.