RD 10-400-01
РД 10-400-01
|
|
Standards for Strength Analysis of Piping of Piped Heat Distribution Systems
Нормы расчета на прочность трубопроводов тепловых сетей
Status: Effective
The guidance document applies to steel pipelines of water heating networks with a working pressure of up to 2.5 MPa and a working temperature of up to 200 degrees. Celsius and steam lines with a working pressure of up to 6.3 MPa and a working temperature of up to 350 degrees. Celsius, laid on supports (above ground and in closed channels), as well as channelless in the ground.
Руководящий документ распространяется на стальные трубопроводы водяных тепловых сетей с рабочим давлением до 2,5 МПа и рабочей температурой до 200 град. Цельсия и паропроводов с рабочим давлением до 6,3 МПа и рабочей температурой до 350 град. Цельсия, прокладываемых на опорах (надземно и в закрытых каналах), а также бесканально в грунте.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
2/14/2001
SKU: RUSS150344
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.14. Equipment operating under excess pressure of more than 0.07 megapascals or at a water heating temperature of more than 115 degrees Celsius »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.6 Industrial safety requirements for pressure equipment »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
6 Requirements for organizations infield of industrial safety »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
The Document References:
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
The Document is Referenced By:
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 7-VEP: Calculation of district heating systems with the requirements of reliability
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
SNiP 41-02-2003: Heat networks
SP 124.13330.2011: Thermal networks
SP 124.13330.2012: Heating networks
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 41-105-2002: Design and construction of underground thermal networks made of steel pipes with industrial thermal insulation made of polyurethane foam in polyethylene sheath
SP 41-106-2004: Design and erection of underground hot water supply and heat supply pipelines made of asbestos cement pipes
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
TR 160-04: Technical Recommendations for the design and channelless installation of intra-block pipelines for hot water supply and heat supply from glass-basalt-plastic pipes and products
TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
