imgalt

RMG 61-2010

РМГ 61-2010

State system for ensuring the uniformity of measurements. Indicators of precision and accuracy of the quantitative chemical analysis techniques. Methods for evaluation

Государственная система обеспечения единства измерений. Показатели точности, правильности, прецизионности методик количественного химического анализа. Методы оценки

Status: Valid - Supersedes

Recommendations apply to methods of quantitative chemical analysis, developed and revised in accordance with GOST 8.010 (GOST R 8.563-2009 applies in the Russian Federation), and establish indicators of accuracy, accuracy, precision of analysis methods and methods for their evaluation. The recommendations are intended for use in assessing the accuracy, accuracy and precision of the analysis methods. Indicators of accuracy, correctness and precision of the analysis methodologies, evaluated in accordance with the recommendations, are used in the following cases: - when issuing certificates of attestation of analysis methods; - at registration of the corresponding sections of the documents containing analysis techniques; - at registration of test reports (control) of products, analysis of objects; - while controlling the quality of analysis results. The provisions of these recommendations can be used to assess the accuracy, correctness and precision of the test methods for substances and materials based on measurements. Recommendations can be used when assessing the quality indicators of methods for quantitative chemical analysis of heterogeneous objects in the case of taking into account the factor associated with the heterogeneity of the object

Рекомендации распространяются на методики количественного химического анализа, разрабатываемые и пересматриваемые в соответствии с ГОСТ 8.010 (на территории РФ действует ГОСТ Р 8.563-2009), и устанавливают показатели точности, правильности, прецизионности методик анализа и методы их оценки. Рекомендации предназначены для применения при оценке показателей точности, правильности, прецизионности методик анализа. Оцененные в соответствии с рекомендациями показатели точности, правильности, прецизионности методик анализа используют в следующих случаях: - при оформлении свидетельств об аттестации методик анализа; - при оформлении соответствующих разделов документов, содержащих методики анализа; - при оформлении протоколов испытаний (контроля) продукции, анализа объектов; - при контроле качества результатов анализа. Положения настоящих рекомендаций могут быть использованы для оценки показателей точности, правильности, прецизионности методик испытаний веществ и материалов, основанных на измерениях. Рекомендации могут быть использованы при проведении оценки показателей качества методик количественного химического анализа гетерогенных объектов в случае учета фактора, связанного с неоднородностью объекта

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/13/2011

SKU: RUSS150362

Price: $1,011.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » I Environmental-legal and economic-legal mechanisms for environmental protection » 1 Management infield of environmental protection and environmental management » 1.5 Environmental monitoring and control »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.2 Organization of activities of metrological services »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.1 Basic requirements for testing laboratories and their activities »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »


As a Replacement Of:

RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination

The Document References:

GOST 12.1.016-79: Work area air

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8.531-2002: State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.753-2011: State system for ensuring the uniformity of measurements. Reference materials of materials (substance). Basic principles

PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality

RMG 43-2001: State system for ensuring the uniformity of measurements. The use of

RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development

RMG 91-2009: State system for ensuring the uniformity of measurements. Joint use of concepts 'error of measurement' and 'uncertainty of measurement'. General principles

RMG 93-2009: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials

The Document is Referenced By:

GOST 10679-2019: Liquefied hydrocarbon gases. Method for the determination of hydrocarbon composition

GOST 16273.0-85: Technical selenium. General requirements for method of spectral analysis

GOST 24975.1-2015: Ethylene and propylene. Chromatographic methods of analysis

GOST 28353.1-2017: Silver. Method of ark atomic-emission analysis

GOST 28353.2-2017: Silver. Method of inductively coupled plasma atomic-emission analysis

GOST 28353.3-2017: Silver. Method of atomic-absorption analysis

GOST 28656-2019: Liquefied hydrocarbon gases. Calculation method for determining the density and pressure of saturated vapors

GOST 32517.1-2013: Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron

GOST 32518.1-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method

GOST 32518.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method

GOST 32520-2013: Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses

GOST 32599.2-2013: Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method

GOST 33527-2015: Milk and dairy component products for baby food. Determination of mono- and disugars mass concentration by method of capillary electrophoresis

GOST 33654-2022: Lignite, rock and anthracite coals. General requirements for methods of analysis

GOST 34049-2017: Milk and dairy products. Determination of aflatoxin M1 content by high performance liquid chromatography with fluorimetric (spectrofluorimetric) detection

GOST 34369-2017: Silver. Method of spark atomic-emission analysis

GOST 34903-2022: Alcohol products. Guidelines for the application of ultrasonic methods of analysis

GOST 8.010-2013: State system for ensuring the uniformity of measurements. Procedures of measurements. Main principles

GOST R 55067-2012: Magnesium chloride. Specifications

GOST R 55079-2012: Steel. Method of inductively coupled plasma atomic-emission analysis

GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development

GOST R 56859-2022: Copper and polymetallic ores and products of their processing. Methods of measurement of the mass fraction of gold and silver

GOST R 56931-2016: Foodstuffs and food raw materials. Voltammetric method of mercury determination

GOST R 56999-2016: Disinfectology and disinfection activities. Chemical disinfectants and antiseptics. Method for the determination of chlorine dioxide in drinking water

GOST R 57474-2017: Disinfectology and disinfection activities. Chemical disinfectants and antiseptics. Methods for determination of quaternary ammonium compounds

GOST R 8.1010-2022: State System for Ensuring Uniformity of Measurements (GSI). Mass fraction of water in oil-gas-water mixture. Requirements for measurement techniques (methods)

GOST R 8.613-2013: State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development

ITS 22.1-2016: General principles of industrial environmental control and its metrological support

M 15-2019: Recommendation. General requirements for analysis methods

M 16-2019: Recommendation. Solutions used in quantitative chemical analysis. Preparation and Control Requirements

MI 2427-2016: Recommendation. State system for ensuring uniformity of measurements. Assessment of measurement status in test, measurement and production and analytical control laboratories

MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil

MU 2.6.5.033-2017: Organization of ventilation at radiation-hazardous enterprises (production facilities) of State Corporation 'Rosatom'

MUK 4.1.011-18: Method for measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melt (snow) water by the photometric method

MUK 4.1.012-18: The method of measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and melt (snow) water by Photometric method

MUK 4.1.3560-19: Determination of residual amounts of aluminum phosphate in cabbage and watermelon fruits by capillary gas-liquid chromatography

MUK 4.1.3561-19: Determination of residual amounts of thiencarbazone methyl in the tops and roots of sugar beets by high performance liquid chromatography

MUK 4.1.3562-19: Determination of residual amounts of oxathiapiproline in water, soil, potato tubers, onion turnips, tomato fruits and tomato juice, grapes and grape juice by high performance liquid chromatography with mass spectrometric detection

MUK 4.1.3563-19: Determination of residual amounts of foramsulfuron in tops and root crops of sugar beet by high performance liquid chromatography

R 50.2.074-2010: State system for ensuring the uniformity of measurements. Requirements for the competence of legal persons and individual entrepreneurs, accredited for the works on certification of measurement procedures, used in analytical control

R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application

RD 52.04.822-2015: Mass concentration of sulfur dioxide in air samples. Photometric measurement method using tetrachloromercine and pararosaniline

RD 52.04.823-2015: Mass concentration of formaldehyde in the samples of atmospheric air. Procedure of measurement by photometric method with acetylacetone

RD 52.04.824-2015: Mass concentration of formaldehyde in the samples of atmospheric air. Procedure of measurement by photometric method with phenylhydrazine

RD 52.04.825-2015: Mass concentration of chlorine in air samples. Photometric measurement method with N, N-dimethyl-n-phenylenediamine dihydrochloride

RD 52.04.831-2015: Mass concentration of carbon-containing aerosol in the samples of atmospheric air. Measurement procedure by photometric method

RD 52.04.836-2015: Mass concentration of volatile chlorocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis

RD 52.04.837-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis

RD 52.04.838-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by gas chromatography using headspace analysis

RD 52.04.893-2020: Mass concentration of suspended solids in atmospheric air samples. Gravimetric measurement technique

RD 52.04.894-2020: Mass concentration of hydrogen fluoride and solid soluble fluorides from one sample of atmospheric air. Photometric Measurement Procedure Using Xylene Orange

RD 52.10.772-2013: Mass concentration of ammonium nitrogen in sea waters. Measurement technique by the photometric method in the form of indophenol blue

RD 52.10.773-2013: Mass concentration of ammonium nitrogen in sea waters. Photometric Measurement Technique with Nessler's Reagent

RD 52.10.774-2013: Mass fraction of mercury in bottom sediments. Measurement Technique by Atomic Absorption Spectrometry

RD 52.10.775-2013: Mass fraction of metals in bottom sediments. Measurement Technique by Atomic Absorption Spectrometry

RD 52.10.777-2012: Internal quality control of information on the state and pollution of the marine environment

RD 52.10.778-2013: Mass concentration of dissolved forms of iron, manganese and chromium in samples of sea water. Measurement Technique by Atomic Absorption Spectrometry

RD 52.10.779-2013: Mass concentration of petroleum hydrocarbons in seawater samples. Methods of measurement by infrared spectrometry

RD 52.10.803-2013: Mass fraction of petroleum hydrocarbons in samples of marine bottom sediments. Methods of measurement by infrared spectrometry

RD 52.10.804-2013: Mass fraction of anionic synthetic surfactants in samples of sea bottom sediments. Measurement technique by atomic absorption spectrometry in electrothermal atomization mode

RD 52.10.805-2013: Mass concentration of total nitrogen in seawater. Measurement technique photometric method after oxidation with potassium persulfate

RD 52.10.806-2013: Mass concentration of chlorides in samples of desalinated sea waters. Measurement technique using argentometric method

RD 52.10.807-2013: Mass concentration of anionic synthetic surface-active substances in sea waters. Methods for measuring by extraction-photometric method with methylene blue

RD 52.18.103-2019: Quality control of analytical works on determining the content of pollutants in the soil

RD 52.18.571-2011: Method for measuring the mass fraction of arsenic in soil and sediment samples using atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"

RD 52.18.583-2011: Method for measuring the mass fraction of antimony in samples of soils and bottom sediments by atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"

RD 52.18.827-2016: Mass fraction of mercury in samples of soil, ground, bottom sediments and biomaterial. Measurement procedure by cold vapour atomic absorption spectroscopy

RD 52.18.843-2017: Mass fraction of mercury in organic compounds in samples of soils, bottom sediments and biological material. Measurement procedure by atomic absorption spectroscopy of "cold steam"

RD 52.24.309-2016: Organization and conduct of regime observations of the state and pollution of surface land waters

RD 52.24.509-2015: Internal quality control of hydrochemical information

RD 52.44.588-2016: Mass concentration of organochlorine pesticides and the sum of polychlorbiphenyl isomers in air and precipitation samples. Method of measurement by gas-liquid chromatography

RD 52.44.589-2016: Mass concentration of priority components of polycyclic aromatic hydrocarbons in atmospheric air samples. Measurement technique by high performance liquid chromatography

RD 52.44.590-2016: Mass concentration of priority components of polycyclic aromatic hydrocarbons in samples of precipitation and surface water. Measurement technique by high performance liquid chromatography

RD 52.44.591-2015: Mass concentration of mercury in atmospheric air. Measurement procedure by cold vapour atomic absorption spectrometry'

RD 52.44.593-2015: Mass concentration of heavy metals in atmospheric air. Measurement technique by atomic absorption spectrometry with flameless atomization

RD 52.44.594-2016: Mass concentration of heavy metals in precipitation and surface waters. Measurement technique by atomic absorption spectrometry with flameless atomization

RD 52.44.816-2015: Mass concentration of methane and carbon dioxide in the surface layer of atmospheric air. Gas Chromatography Measurement Technique

RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements

ST RK 2486-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of cobalt, tin, and lead by stripping voltammetry

ST RK 2487-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of potassium, selenium and silver by stripping voltammetry

ST RK 2730-2015: Water quality. Method for the determination of nitrate ions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!