State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination
Государственная система обеспечения единства измерений. Показатели точности, правильности, прецизионности методик количественного химического анализа. Методы оценки
Status: Not effective - Superseded. IUS 8-2012
Recommendations apply to methods of quantitative chemical analysis, intended for use in a number of laboratories, developed and revised in accordance with GOST 8.010.
Рекомендации распространяются на методики количественного химического анализа, предназначенные для применения в ряде лабораторий, разрабатываемые и пересматриваемые в соответствии с ГОСТ 8.010.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/27/2004
SKU: RUSS150365
The Product is Contained in the Following Classifiers:
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
The Document is Replaced With:
RMG 61-2010: State system for ensuring the uniformity of measurements. Indicators of precision and accuracy of the quantitative chemical analysis techniques. Methods for evaluation
The Document References:
GOST 12.1.016-79: Work area air
GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
MI 1317-86: Guidelines. State system for ensuring uniformity of measurements. Results and characteristics of measurement error. Forms of representation. Methods of use when testing product samples and monitoring their parameters
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
RMG 43-2001: State system for ensuring the uniformity of measurements. The use of
RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development
ST SEV 543-77: Numbers. Requirements for Notation and Rounding Off
The Document is Referenced By:
GOST 17261-2008: Zinc. Methods of the atomic emission spectrographic analysis.
GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis
GOST 31411-2009: Ammonium perrenat. Specifications
GOST 33654-2015: Brown coals, hard coals and anthracites. General requirements for methods of analysis
GOST 444-2016: Flotation sulphur pyrite. Specifications
GOST R 52599-2006: Precious metals and their alloys. General requirements for methods of analysis
GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST R 54153-2010: Steel. Method of atomic emission spectral analysis
GOST R 54335-2011: Palladium. Method of spark atomic-emission analysis
GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST R 56307-2014: Silver. Method of spark atomic-emission analysis
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development
GOST R 8.713-2010: State system for ensuring the uniformity of measurements. Metrological assurance of chemical weapons destruction. General requirements for measurement of toxic compounds and their destruction products content in soils
M 15-2010: Recommendation. General requirements for quantitative chemical analysis
M 20-2010: Recommendation. Accuracy standards for the quantitative chemical analysis of ferrous metallurgy materials
M 24-2012: Recommendation. Certification of methods (methods) of measurements of indicators of the composition and properties of objects of metallurgical production, industrial environmental monitoring, environmental monitoring, chemical factors of the industrial en
MI 2976-2006: Recommendation. State system for ensuring uniformity of measurements. Construction, content and presentation of documents governing the methods of quantitative chemical analysis
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MU 08-47/216: Bioobjects (hair, tissue). Inversion voltammetric method for measuring mass concentrations of chromium
MU 2.2.5.2810-10: Laboratory monitoring of harmful substances in air of working zone of enterprises of main industry sectors
MUK 4.1.011-18: Method for measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melt (snow) water by the photometric method
MUK 4.1.034-17: Methods of measuring the mass concentration of ammonium perchlorate in the air of the working area by the photometric method
MUK 4.1.035-17: The method of measuring the mass concentration of ammonium perchlorate in the washes from equipment surfaces, building structures, skin and personal protective equipment by the photometric method
MUK 4.4.052-08: Measurement of ambient dose equivalent and ambient equivalent dose of gamma radiation using gamma radiation dosimeters DKG-02U Arbiter, DKG-01D Garant, DKG-03D Grach, MKS RM-1401K radiation monitoring in an emergency
PND F 16.1:2.3:2.2:3.57-08: Quantitative chemical analysis of soil. Methods for measuring the mass fraction of aluminum in soils, sewage sludge, sludge, production and consumption waste, active sludge from sewage treatment plants, bottom sediments by the photometric method with aluminon
PND F 16.1:2:2.2:2.3:3.64-10: Quantitative chemical analysis of soil. Methods of measuring the mass fraction of petroleum products in samples of soil, soil, sediment, silt, sewage sludge, production and consumption waste by the gravimetric method
PND F 16.1:2:2.2:3.59-09: Quantitative chemical analysis of soil. Methods for measuring the mass fractions of benzene and toluene in the soil, soils, bottom sediments, production waste and consumption by gas chromatography
PND F 16.1:2:2.2:3.65-10: Quantitative chemical analysis of soil. Methods of measuring the mass fraction of silicon dioxide in samples of soil, soil, sediment, silt, production and consumption waste by the gravimetric method
PND F 16.1:2:2.2:3.66-10: Quantitative chemical analysis of soil. Methods of measuring the mass fraction of anionic surfactants in samples of soils, soils, bottom sediments, silts, production and consumption wastes by extraction-photometric method
PND F 16.1:2:2.2:3.67-10: Quantitative chemical analysis of soil. Methods of measuring the mass fraction of nitrate nitrogen in samples of soil, soil, sediment, silt, production and consumption waste by the photometric method with salicylic acid
PND F 16.1:2:2.2:3.68-10: Quantitative chemical analysis of soil. Methods of measuring the mass fraction of manganese in soil samples, soil, sediment, silt, production and consumption waste by photometric method with ammonium persulfate
PND F 16.1:2:2.2:3.77-2013: Method for measuring the mass fraction of vanadium in soils, soils, bottom sediments, production and consumption wastes by the photometric method with phosphoric acid and sodium tungstate
R 50.2.011-2005: State system for ensuring uniformity of measurements. Verification of the qualifications of testing (measuring) laboratories performing tests of substances, materials and environmental objects (in composition and physicochemical properties) by means of interlaboratory comparisons
R 50.2.074-2010: State system for ensuring the uniformity of measurements. Requirements for the competence of legal persons and individual entrepreneurs, accredited for the works on certification of measurement procedures, used in analytical control
RD 52.10.735-2010: Hydrogen indicator of marine waters. Potentiometric Measurement Technique
RD 52.10.738-2010: Mass concentration of phosphate in sea waters. Technique for measuring using photometric method.
RD 52.10.739-2010: Mass concentration of total phosphorus in seawater. Measurement technique photometric method after oxidation with potassium persulfate
RD 52.10.740-2010: Mass concentration of nitrite nitrogen in marine waters. Photometric Measurement Technique with Griss Reagent
RD 52.10.743-2010: Total alkalinity of sea water. Measurement method titrimetric method
RD 52.10.744-2010: Mass concentration of silicon in sea water. Measurement technique by the photometric method in the form of a blue form of molybdosilicic acid
RD 52.10.745-2010: Mass concentration of nitrate nitrogen in sea water. Photometric Measurement Technique after Recovery in a Cadmium Reducer
RD 52.18.180-2011: Guidelines. Determination of the mass fraction of organic halide pesticides P, P-DDT, P, P-DDE, alpha-HCH, gamma-HCH, trifluralin in soil samples. Methodology for measurement using gas-liquid chromatography
RD 52.18.188-2011: Mass fraction of triazine herbicides of simazine and prometrin in soil samples. Measurement technique by gas-liquid chromatography. NGO "Typhoon"
RD 52.18.264-2011: Mass fraction of herbicide 2, 4-dichlorophenoxyacetic acid in soil samples. Measurement technique by gas-liquid chromatography. NGO "Typhoon"
RD 52.18.287-2011: Mass fraction of Dalapone herbicide in soil samples. The method of measurement using gas-liquid chromatography. NGO "Typhoon"
RD 52.18.288-2011: Mass fraction of sodium trichloroacetate herbicide in soil samples. Method of measurement by gas-liquid chromatography
RD 52.18.310-2011: Mass fraction of organophosphorus pesticides parathion-methyl, fosalone, dimethoate in soil samples. Method of measurement by gas-liquid chromatography
RD 52.18.571-2011: Method for measuring the mass fraction of arsenic in soil and sediment samples using atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"
RD 52.18.583-2011: Method for measuring the mass fraction of antimony in samples of soils and bottom sediments by atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"
RD 52.18.623-2011: Mass fraction of herbicides bentiocarb and molinate and the identification of propanil and its metabolite 3, 4-dichloraniline in soil samples. Method of measurement by gas-liquid chromatography
RD 52.18.649-2011: Mass fraction of organohalogen pesticides in soil samples. Measurement technique by gas-liquid chromatography. NGO "Typhoon"
RD 52.18.656-2011: Mass fraction of synthetic pyrethroids deltamethrin, fenvalerate, alpha-cypermethrin in soil samples. Method of measurement by gas-liquid chromatography
RD 52.24.309-2011: Organization and conduct of regime monitoring of the state and pollution of surface land waters
RD 52.24.509-2005: Internal hydro-chemical information quality control
RMG 103-2010: State system for ensuring the uniformity of measurements. Proficiency testing of test (measurement) laboratories, conducting the tests of substances, materials and environmental objects (for composition and physico-chemical properties) by means of interla
RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy
RMG 76-2014: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
ST RK 1729-2007: Meat and meat products. Acceptance Rules and Test Methods
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
