State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
Государственная система обеспечения единства измерений. Метрология. Основные термины и определения
Status: Effective - Supersedes. IUS 5-2015
The recommendations establish the basic terms and definitions of concepts in the field of metrology. The terms established by the document are recommended to be used in all types of documentation, scientific and technical, educational and reference literature on metrology included in the scope of standardization work and / or using the results of these works.
Рекомендации устанавливают основные термины и определения понятий в области метрологии. Термины, установленные документом, рекомендуется применять во всех видах документации, научно-технической, учебной и справочной литературе по метрологии, входящих в сферу работ по стандартизации и (или) использующих результаты этих работ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/5/2013
SKU: RUSS150415
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.040 Dictionaries »
01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.010 Energy and heat engineering in general »
As a Replacement Of:
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 7.67-2003: System of standards of information, librarianship and publishing. Codes of names of countries
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
The Document is Referenced By:
Decision 189: About the classifier of metrological characteristics
FR 1.31.2007.03794: Methodical recommendations on the application of the method of performing pH measurements in waters by the potentiometric method
GOST 1983-2015: Voltage transformers. General specifications
GOST 26374-2018: Combustible natural gas. Determination of total sulphur
GOST 32019-2012: Technical condition monitoring of the unique buildings and constructions. Rules of design and installation of permanent systems (stations) of monitoring
GOST 33702-2015: Systems for measuring the quantity and quality of gas condensate, liquefied hydrocarbon gas and a wide fraction of light hydrocarbons. General technical requirements
GOST 33873-2016: Gas supply system. Gas production from offshore fields. Conditions of stay and use of buildings and structures safe for human health. Light environment. Inspection
GOST 33935-2016: Gas supply system. Trunk pipeline transportation of gas. Conditions of stay and use of buildings and structures safe for human health. Microclimate. Inspection
GOST 33974-2016: Remote control for railway energy supply system. General specifications
GOST 34049-2017: Milk and dairy products. Determination of aflatoxin M1 content by high performance liquid chromatography with fluorimetric (spectrofluorimetric) detection
GOST 34348-2017: Вакуумная техника. Вакуумметры. Оценивание неопределенностей результатов калибровки при непосредственном сличении с эталоном
GOST 34854-2022: Calibers for connections with tapered threads of casing, tubing, drilling and pipeline pipes. Methods of measuring geometric parameters
GOST 34903-2022: Alcohol products. Guidelines for the application of ultrasonic methods of analysis
GOST 7746-2015: Current transformers. General specifications
GOST 8.010-2013: State system for ensuring the uniformity of measurements. Procedures of measurements. Main principles
GOST 8.021-2015: State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments
GOST 8.278-2013: State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
GOST 8.315-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition and properties of substances and materials. Key Points
GOST 8.321-2013: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods
GOST 8.472-2013: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure
GOST 8.620-2013: State system for ensuring the uniformity of measurements. Testing equipment for determination of particle filter penetration for respiratory protective devices. Verification method
GOST 8.621-2013: State system for ensuring the uniformity of measurements. Testing equipment for determination of resistance to clogging for respiratory protective devices particle filters. Verification method
GOST 8.641-2014: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of power of electromagnetic oscillations in coaxial and waveguide lines
GOST 8.651-2016: State system for ensuring the uniformity of measurements. Medical devices. Radiation sterilization. Dosimetric techniques
GOST 8.662-2018: State system for ensuring the uniformity of measurements. Dissolved hydrogen analyzers. Calibration methods
GOST 8.664-2019: State system for ensuring the uniformity of measurements. Food products. Radiation processing of food products. Dosimetry requirements
GOST ISO Guide 33-2019: Standard samples. Good practice for using reference materials
GOST R 113.06.01-2023: Best available technologies. Automated emission control systems in the production of cement. General requirements for the organization of automatic control and the selection of measuring sections and measurement locations
GOST R 50.05.14-2019: Conformity assessment system in the field of atomic energy use. Means of ultrasonic testing of basic materials, welded joints and deposited surfaces of equipment and pipelines of nuclear power plants. General requirements
GOST R 50.05.16-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unbrakable control. Metrological support
GOST R 50.08.04-2022: System of conformity assessment in the field of atomic energy use. Results (protocols) of product tests. The procedure of acknowledgement
GOST R 53188.1-2019: State system for ensuring uniformity of measurements. Sound level meters. Part 1. Technical requirements
GOST R 53188.2-2019: State system for ensuring uniformity of measurements. Sound level meters. Part 2. Test methods
GOST R 53188.3-2019: State system for ensuring uniformity of measurements. Sound level meters. Part 3. Verification Methods
GOST R 53366-2009: Steel pipes for use as casing or tubing for wells in petroleum and natural gas industries. General specifications
GOST R 54977-2019: Mining equipment. Multifunctional coal mine safety systems. Terms and Definitions
GOST R 55798-2013: Gas Turbines. Methods of testing. Acceptance tests
GOST R 56510-2015: Metrological assurance in the field of non-destructive testing
GOST R 56835-2015: Liquefied natural gas. Boil-off gas of liquefied natural gas production. Determination of composition by gas chromatography method
GOST R 57216-2016: Radiation control. Presentation of measuring results
GOST R 57393-2017: Microelectromechanical transducers of linear acceleration. Methods for measurement parameters
GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST R 57553-2017: The nature conservancy. Hydrosphere. The assessment of water quality compliance with the statutory requirements taking into account summation effect
GOST R 57614-2017: Natural combustible gas. Energy determination
GOST R 57975.1-2017: Associated oil gas. Determination of composition by gas chromatography method. Part 1. Determination of hydrocarbons C1-C8+ and inorganic gases content by flame ionization detector and thermal conductivity detector
GOST R 58046-2017: Quality management systems for aviation, space and defense organizations. Advanced product quality planning. Guide to measurement process analysis
GOST R 58274-2018: Space systems. Metrological provision of technological preparation of production. Main provisions
GOST R 58322-2018: Contact network for high-speed rail lines. Technical requirements and control methods
GOST R 58349-2019: General automobile roads. Road clothes. Methods for measuring the thickness of pavement layers
GOST R 58525-2019: Protection of Nature. Hydrosphere. Water quality. Rules for establishing the frequency of control
GOST R 58573-2019: Protection of Nature. Hydrosphere. Water quality. Risk-based control
GOST R 58574-2019: Protection of Nature. Hydrosphere. Water quality. Methodology of economic analysis of conformity assessment with established requirements
GOST R 58575-2019: Protection of Nature. Hydrosphere. Water quality. Conflict resolution technique in disputed (arbitration) situations
GOST R 58597-2019: Additive technology. Additive technology non-destructive testing
GOST R 58601-2019: Unified energy system and isolated energy systems. Operational Dispatch Management. Relay protection and automation. Autonomous emergency recorders. Norms and requirements
GOST R 58926-2020: The system for ensuring the uniformity of measurements at the enterprises of the aviation industry. Basic Provisions
GOST R 58929-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of aircraft products
GOST R 58930-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of automated control devices
GOST R 58938-2020: A system for ensuring the accuracy of geometric parameters in construction. Basic Provisions
GOST R 58943-2020: A system for ensuring the accuracy of geometric parameters in construction. Accuracy control
GOST R 59987-2022: Ship navigation equipment. Systems of free-form inertial navigation of maritime applications. Standardization and control of designation indicators
GOST R 59988.02.1-2022: Computer-aided design systems for electronics. Information support. Technical characteristics of electronic components. Integrated circuits. Specification of declarative knowledge on technical characteristics
GOST R 70024.1-2022: State System for Ensuring Uniformity of Measurements (GSI). Octave and fraction-of-octave bandpass filters. Part 1. Technical requirements
GOST R 70413-2022: ISO/TS 20914:2019 Medical laboratories. A practical guide to the assessment of measurement uncertainty
GOST R 70451-2022: Unified energy system and isolated power systems. Electrical substations. Automated control systems of technological processes. Conditions for creation. Norms and requirements.
GOST R 8.1004-2021: State system for ensuring the uniformity of measurements (GSI). Systems for measuring the quantity and parameters of oil and oil-gas-water mixtures and measuring installations. Metrological and technical requirements
GOST R 8.1012-2022: State system for ensuring the uniformity of measurements. Water meters. Verification procedure
GOST R 8.1015-2022: State System for Ensuring Uniformity of Measurements (GSI). Metrological expertise of normative and technical documentation in the field of atomic energy use. Organization and basic requirements to the content
GOST R 8.1016-2022: State system for ensuring the uniformity of measurements (GSI). Measurements of quantity of oil and associated petroleum gas extracted from the subsurface. General metrological and technical requirements
GOST R 8.1017-2023: State system for ensuring the uniformity of measurements. Gas meters. Verification procedure
GOST R 8.696-2010: State system for ensuring the uniformity of measurements. Interplanar spacings in crystals and the intensity distribution in diffraction patterns. Method for measurement by means of an electron diffractometer
GOST R 8.735.1-2014: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulometry
GOST R 8.741-2011: State system for ensuring the uniformity of measurements. Volume of natural gaz. General requirements for measurement procedure
GOST R 8.741-2019: State system for ensuring the uniformity of measurements. The volume of natural gas. General requirements for measurement procedures
GOST R 8.749-2011: State system for ensuring the uniformity of measurements. LED. Methods of photometric measurements
GOST R 8.757-2011: State system for ensuring the uniformity of measurements. Condensation hygrometers. The method of verification
GOST R 8.758-2011: State system for ensuring the uniformity of measurements. Coulometric hygrometers. General specifications
GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements
GOST R 8.794-2012: State system for ensuring the uniformity of measurements. Ground laser scanners. Verification procedure
GOST R 8.811-2012: State system for ensuring the uniformity of measurements. Psychometric tables. Constitution, content, calculating correlations
GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements
GOST R 8.825-2013: State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Methods of accelerated tests
GOST R 8.867-2014: The state system of measurement assurance. The verification of a measuring instruments of direct current in range from 1·10 raised to the power of-15 to 1·10 raised to the power of -9 A
GOST R 8.882-2015: State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles
GOST R 8.885-2015: State system for ensuring the uniformity of measurements. Measurement standards. Basic principles
GOST R 8.888-2015: State system for ensuring the uniformity of measurements. Reference light-emitting diodes (LED) of noncoherent radiation. Technical requirements
GOST R 8.890-2015: State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric measurements
GOST R 8.891-2015: State system for ensuring the uniformity of measurements. Measuring and indicating biochemistry test system. Technical and metrological requirements. Basic principles
GOST R 8.902.1-2015: The state system of ensuring the uniformity of measurements. Variable pressure drop technique. Special orifices. Part 1. Principle of measurement technique and general requirements
GOST R 8.905-2015: State system for ensuring the uniformity of measurements. Indicating pressure gauges. Ordinary measuring instruments. Metrological requirements and test methods
GOST R 8.906-2015: State system for ensuring the uniformity of measurements. Indication pressure gauges. Reference measuring instruments. Metrological requirements and test methods
GOST R 8.909-2016: State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
GOST R 8.910-2016: State system for ensuring the uniformity of measurements. The mass of oil as a part of oil and gas water mixture. Techniques (methods) of measurements
GOST R 8.913-2016: State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.915-2016: State system for ensuring the uniformity of measurements. Diaphragm volumetric gas meters. General technical requirements, test and calibration methods
GOST R 8.918-2016: State system ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements
GOST R 8.920-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics
GOST R 8.921-2016: State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
GOST R 8.925-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
GOST R 8.926-2016: State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics
GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements
GOST R 8.930-2016: State system for ensuring the uniformity of measurements. Transfer units of time, frequency and time scale national UTC (SU) from the State primary standard. The Russian Federation with the use of the GLONASS system. Fundamentals
GOST R 8.931-2016: State system for insuring the uniformity of measurements. Cold and hot water meters. Calibration interval evaluation
GOST R 8.932-2017: State system for ensuring the uniformity of measurements. Requirement to methodologies (to the methods) of measuring in area of uses of nuclear-power. Substantive provisions
GOST R 8.932-2022: State System for Ensuring Uniformity of Measurements (GSI). Requirements to measurement procedures (methods) in the field of atomic energy use. General provisions
GOST R 8.933-2017: State system for ensuring the uniformity of measurements. Establishment and application of precision measurements and acceptance values in the field of nuaclear power using
GOST R 8.972-2019: State system for ensuring the uniformity of measurements. Gas consumption and amount. Measurement technique with critical nozzles
GOST R 8.976-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition of calibration gas mixtures. General specifications
GOST R 8.984-2019: State system for ensuring the uniformity of measurements. Internal quality control of measurements in the field of atomic energy use
GOST R 8.985-2020: State system for ensuring the uniformity of measurements. Standard Reference Service for the Use of Atomic Energy. General Provisions
GOST R ISO 10360-3-2017: Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines with the axis of a rotary table as the fourth axis
GOST R ISO 10360-4-2017: Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines used in scanning mode
GOST R ISO 17511-2022: Medical products for in vitro diagnostics. Requirements for establishing metrological traceability of values assigned to calibrators, correctness control materials and samples of human biological material
M 15-2019: Recommendation. General requirements for analysis methods
M 16-2019: Recommendation. Solutions used in quantitative chemical analysis. Preparation and Control Requirements
MI 2427-2016: Recommendation. State system for ensuring uniformity of measurements. Assessment of measurement status in test, measurement and production and analytical control laboratories
MI 2453-15: GSE. Methods of radiation monitoring. General requirements
MI 3174-2009: Recommendation. State system for ensuring uniformity of measurements. Establishing the traceability of certified values of reference materials
MI 3195-2018: Recommendation. State system for ensuring uniformity of measurements. Method of measuring the load power of measuring voltage transformers under operating conditions
MI 3290-2010: State system for ensuring uniformity of measurements. Recommendation on the preparation, execution and review of test materials of measuring instruments for type approval
MI 3592-17: Recommendation. State system for ensuring uniformity of measurements. Methods for determining the metrological characteristics of measuring instruments used in the field of atomic energy use
MI NTP.INT-17.01-2018: The method of measuring the indicators of the intensity of the labor process for the purpose of a special assessment of working conditions
MI TTP.INT-16.01-2018: Methodology for measuring the severity of the labor process for the purpose of a special assessment of working conditions
MU 2.6.5.032-2017: Control of radioactive contamination of surfaces
MUK 4.1.034-17: Methods of measuring the mass concentration of ammonium perchlorate in the air of the working area by the photometric method
ODM 218.5.014-2019: Methodology for monitoring the performance and monitoring of metrological characteristics of complexes of automated weight and size control
Order 1794: About the approval of the state verification scheme for measuring instruments of torque
PMG 126-2013: State system for ensuring the uniformity of measurements. Procedure for certification of measurement techniques and their applications in the fields of legal metrology of the Commonwealth of Independent States
PMG 16-2019: Regulation on the Interstate Standard Model
PMG 26-2019: Register of interstate reference materials for the composition and properties of substances and materials. Key Points
PNST 159-2016: Automatic information and measuring system of commercial accounting of electric energy. General specifications
PNST 188-2017: Measurement procedures for operational control of instruments for activity measurement
PNST 360-2019: State system for ensuring the uniformity of measurements. Measurements of the amount of oil and associated petroleum gas extracted from the bowels of the earth. General metrological and technical requirements
PNST 604-2022: Oil and gas industry. Subsea production systems. Use of subsea raw gas flow meters in distribution measurement systems
R 50.2.094-2013: State system for ensuring the uniformity of measurements. The methodology of the metrological examination of the technical regulations of the Customs Union
R 50.2.096-2015: State system for ensuring the uniformity of measurements. Metrological criteria of conformity assessment of the object of technical regulation to the requirements of technical regulations and standards
R 50.2.097-2015: State system for ensuring the uniformity of measurements. Assessment of the state of activity measurement, calibration and testing laboratories to meet accreditation criteria in the area of traceability
RD 52.04.716-2009: Rules of operation of civil aerodrome weather equipment.
RD 52.08.828-2015: Departmental measurement chain for measuring instruments of water flow speed in the range from 0.01 to 5.00 m/s
RD 52.08.829-2015: Measurement chain for water level measuring instruments in the range from 0 to 20 m
RD 52.18.103-2019: Quality control of analytical works on determining the content of pollutants in the soil
RD 52.18.642-2018: Rules for the construction, presentation, design, designation and requirements for the content of text documents
RMG 115-2019: State system for ensuring the uniformity of measurements. Calibration of measuring instruments. Algorithms for processing measurement results and estimating uncertainty
RMG 119-2013: State system for ensuring the uniformity of measurements. General to meet testing works
RMG 128-2013: State system for ensuring the uniformity of measurements. Requirements for the creation of laboratories performing tests and measurements
RMG 132-2013: State system for ensuring the uniformity of measurements. The automated data-measuring systems for the commercial metering of electric power. Recommendations on drawing up of type description
RMG 133-2013: State system for ensuring the uniformity of measurements. The automated data-measuring systems for the commercial metering of electric power. Model verification procedure
RMG 17-2019: The order of planning work on cooperation in the field of creation and application of standard samples of the composition and properties of substances and materials
RMG 75-2014: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions
RMG 91-2019: State system for ensuring the uniformity of measurements. Use of the concepts “measurement error” and “measurement uncertainty”. General principles
RMG 93-2015: State system for ensuring the uniformity of measurements. Estimation of metrological characteristics of reference materials
STO 1.1.1.07.001.0675-2017: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.