imgalt

RMG 29-99

РМГ 29-99

State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

Государственная система обеспечения единства измерений. Метрология. Основные термины и определения

Status: Not effective - Superseded. IUS 5-2015

The recommendations establish the basic terms and definitions of concepts in the field of metrology. The terms established by this document are recommended to be used in all types of documentation, scientific and technical, educational and reference literature on metrology included in the scope of work on standardization and / or using the results of these works.

Рекомендации устанавливают основные термины и определения понятий в области метрологии. Термины, установленные настоящим документом, рекомендуется применять во всех видах документации, научно-технической, учебной и справочной литературе по метрологии, входящих в сферу работ по стандартизации и (или) использующих результаты этих работ.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization and Metrology, 5/17/2000

SKU: RUSS150416

Price: $1,121.00


National keywords: автомобили; безопасность; величины; всн; гост; государственная; государственная система обеспечения единства измерений; государственный метрологический контроль; государственный метрологический надзор; государственный эталон; гси; добровольная сертификация средств измерений; единая; единица измерений; единство измерений; изделие; изделия; измерение; измерительный контроль; инструкция; информационная; испытания средств измерений; калибровка; материалы; машины; методика; методика измерений; методические; метрологическая служба; метрологическая экспертиза; метрология; ми; му; мук; нестабильность средства измерений; нормы; обеспечение единства измерений; оборудование; поверка; погрешность результата измерений; погрешность результатов измерений; погрешность сре; погрешность средства измерений; положение; порядок; правила; продукты; р; рд; рекомендации; руководство; система; системы; снип; совместимость; сп; сплавы; средство измерений; сто; типовая; тои; требования; трубы; тсн; условия измерений; утверждение типа средств измерений; эталон;

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.040 Dictionaries » 01.040.17 Metrology and Measurements. Physical phenomena (Dictionaries) »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T8 State measurement system » T80 Rules, norms, regulations infield of ensuring uniformity of measurements »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » State system for ensuring the uniformity of measurements (GSI) »


The Document is Replaced With:

RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

As a Replacement Of:

GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions

The Document References:

GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions

The Document is Referenced By:

GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.014-84: Working zone air

GOST 12.1.016-79: Work area air

GOST 16865-79: X-ray apparatus for structural and spectral analyses. Terms and definitions

GOST 19619-74: Radio telemetry equipment. Terms and definitions

GOST 1983-2001: Voltage transformers. General specifications

GOST 20798-75: Mutual inductance actual measures. General specifications

GOST 21535-76: Ranging and hyperbolic radio navigation fixing system. Terms and definitions

GOST 22261-94: Measuring instruments for electrical

GOST 22387.2-2014: Combustible natural gases. Methods for determination of hydrogen sulphide and mercaptan sulphur

GOST 22705-77: Radiation engineering. Terms and definitions

GOST 22751-77: Neutron generators. Method of fast neutron flux measurement

GOST 23327-98: Milk and milk products. Determination of mass part of total nitrogen by Kjeldahl method and determination of mass part of protein

GOST 23625-2001: Measuring laboratory voltage transformers. General specifications

GOST 23718-2014: Passenger and transport airplanes and helicopters. Admissible levels of vibration in saloons and crew cabins and methods of vibration measuring

GOST 24368-80: Carbon bearings and pickings of water pumps. Technological process of impregnation with fluoride

GOST 24453-80: Laser parameter and characteristic measurements. Terms, definitions and letter symbols

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 29192-91: Electromagnetic compatibility of technical means. Classification of technical means

GOST 29226-91: Viscometers for liquids

GOST 30421-96: Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications

GOST 30852.3-2002: Explosionproof electrical equipment. Part 2. Filling or purging of the pressurized enclosure «p»

GOST 31580.3-2012: Ophthalmic implants. Intraocular lenses. Part 3. Mechanical properties and test methods

GOST 33950-2016: Pyrotechnic products. Test methods

GOST 4.417-86: Product-quality index system. Geodesic instruments. Index nomenclature

GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications

GOST 7746-2001: Current transformers. General specifications

GOST 8.142-2013: State system for insuring the uniformity of measurements. The national traceability chain for instruments measuring the mass and volumetric (the mass and the volume) flow of liquid

GOST 8.216-2011: State system for ensuring the uniformity of measurement. Potential transformers Checking methods.

GOST 8.259-2004: State system for ensuring the uniformity of measurements. Electrical induction active and reactive energy meters. Methods of verification

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8.374-2013: State system for insuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric and mass flow (volume and mass) of water

GOST 8.381-2009: State system for ensuring the uniformity of measurements. Standards. Ways for expressing the accuracy

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST 8.518-2010: State system for ensuring the uniformity of measurements. Ferritometers for austenitic steels. Verification procedure

GOST 8.547-2009: State system for ensuring the uniformity of measurements. State verification schedule for means measuring humidity of gases

GOST 8.578-2002: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in gaseous media

GOST 8.578-2008: State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments of the content of components in gaseous media

GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums

GOST 8.584-2004: State system for ensuring the uniformity of measurements. Alternating current static meters for active energy. Methods of verification

GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements

GOST 8.591-2009: State system for ensuring the uniformity of measurements. Nanometre range relief measure with trapezoidal profile of elements. Verification method

GOST 8.592-2009: State system for ensuring the uniformity of measurements. Single-crystal silicon nanometre range relief measures. Geometrical shapes, linear size and manufacturing material requirements

GOST 8.611-2013: State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Procedure for measurements of by ultrasonic meters

GOST 8.619-2013: State system for ensuring the uniformity of measurements. Testing equipment for determination of breakthrough time for respiratory protective devices gas filters. Verification method

GOST 8.628-2013: State system for ensuring the traceability of measurements. Medical electrical products. Веdside monitors. Verification method

GOST 8.629-2013: State system for ensuring the traceability of measurements. Stationary and mobile verification means for combustible gases and vapours gas analysers and gas alarm devices. General technical requirements

GOST 8.630-2013: State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials

GOST R 1.11-99: State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects

GOST R 50012-92: Electromagnetic compatibility of technical equipment. Power electrotechnic equipment. Methods of measurement for low frequency periodical magnetic field parameters

GOST R 51086-97: Electronic sensors and physical value transducers. Terms and definitions

GOST R 51649-2000: Heat meters for water heat supply systems. General specifications

GOST R 51649-2014: Heat meters for water heat supply systems. General specifications

GOST R 51657.4-2002: Water flow measurement in hydromelioration and water supply systems. Water discharge measurement in open channels by triangular profile weirs. General technical requirements

GOST R 51657.5-2002: Water flow measurement in hydromelioration and water supply systems. Manner of measurement of water discharge using the ultrasonic (acoustic) velocity meters. General technical requirements

GOST R 51814.5-2005: Management quality systems for automotive industry. Measurement systems analysis

GOST R 51963-2002: Standard radionuclide solutions and standard ionizing radiation radionuclide sources. Verification certificate contents

GOST R 52039-2003: Ophthalmic implants. Intraocular lenses. Part 3. Mechanical properties and test methods

GOST R 52440-2005: Digital terrain models. General requirements

GOST R 52782-2007: Gas turbines. Test methods. Acceptance tests

GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

GOST R 54082-2010: Requirements for performance of chambers for industrial products environmental endurance tests. Data processing methods for chamber certification (calibration)

GOST R 54127-1-2010: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements

GOST R 54127-2-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance

GOST R 54127-3-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance

GOST R 54127-5-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54455-2011: Alarm systems. Environmental test methods

GOST R 54859-2011: Buildings and constructions. Definition of the parameters of the basic tone of free oscillations of buildings

GOST R 55079-2012: Steel. Method of inductively coupled plasma atomic-emission analysis

GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis

GOST R 55197-2012: Remote control for railway energy supply system. General specifications

GOST R 55233-2012: Intelligent gas sensor modules. General technical requirements and methods of testing

GOST R 55527-2013: Protecting constructions of the railway rolling stock premises. Test methods for determining the thermal technical indicators

GOST R 55847-2013: Air transport. Maintenance and repair system of the aircraft. Monitoring parameters of technological equipment. General principles

GOST R 55867-2013: Air transport. Metrological support on air transport. General principles

GOST R 55974-2014: Sensors and transforming equipment space rocket technology. The composition and presentation of technical data in the design and operational documentation

GOST R 55991.1-2014: In vitro diagnostics medical devices. Part 1. Automatic analysers for biochemical assays. Technical requirements for public procurement

GOST R 55991.2-2014: In vitro diagnostics medical devices. Part 2. Automatic analyser for immunoassays. Technical requirements for public procurement

GOST R 55991.3-2014: In vitro diagnostics medical devices. Part 3. Automatic analysers for bimolecular assays. Technical requirements for public procurement

GOST R 55991.4-2014: In vitro diagnostics medical devices. Part 4. Automatic analysers for coagulation tests. Technical requirements for public procurement

GOST R 55991.5-2014: In vitro diagnostics medical devices. Part 5. Automatic analysers for blood gas, metabolite and acid-base balance assessment. Technical requirements for public procurement

GOST R 55991.6-2014: In vitro diagnostics medical devices. Part 6. Automatic analysers for haematology tests. Technical requirements for public procurement

GOST R 55991.7-2014: In vitro diagnostics medical devices. Part 7. Automatic analysers for general clinical tests. Technical requirements for public procurement

GOST R 56069-2014: Requirements for experts and specialists. Verification of measuring instruments. Basic principles

GOST R 56098-2014: Space systems. Metrological examination design documentation. Organization and procedure

GOST R 56246-2014: Services of trade. Services of the retail markets. General requirements

GOST R 56834-2015: Combustible natural gas. Determination of oxygen content

GOST R 56916-2016: Natural combustible gas. Determination of water vapours content by Karl Fisher method

GOST R 8.562-2007: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.594-2002: State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles

GOST R 8.611-2005: State system for ensuring the uniformity of measurements. Standard thermoelectric platinum rhodium/platinum converters of the first, the second and the third grades. Verification procedure

GOST R 8.617-2006: State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power of electromagnetic waves within the frequency range from 37,50 to 53,57 GHz

GOST R 8.628-2007: State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection

GOST R 8.629-2007: State system for ensuring the uniformity of measurements. Nanometre range relief measures with trapezoidal profile of elements. Methods for verification

GOST R 8.632-2007: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles

GOST R 8.632-2013: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Basic principles

GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements

GOST R 8.649-2008: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the content of components in solid and liquid mediums in spectral range from 0,19 to 1,0 mu

GOST R 8.650-2008: State system for ensuring the uniformity of measurements. Measurement of vibration power flow from machines into connected support structures. Part 1. Direct method

GOST R 8.651-2009: State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration

GOST R 8.653-2009: State system for ensuring the uniformity of measurements. Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Part 2. Indirect method

GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification

GOST R 8.656-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. Methods of verification

GOST R 8.660-2009: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods

GOST R 8.665-2009: State system for ensuring the uniformity of measurements. Photo-electric luхmeter and brightness meter. Methods of verification

GOST R 8.666-2009: State system for ensuring the uniformity of measurements. Moisture meters neutron. The method of verification

GOST R 8.669-2009: State system for ensuring the uniformity of measurements. Vibrometers with piezoelectric, induction and eddy current vibrations transducers. Methods of verification

GOST R 8.673-2009: State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Basic Terms and Definitions

GOST R 8.674-2009: State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function

GOST R 8.676-2009: State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring ethanol content in gaseous and liquid media

GOST R 8.681-2009: State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials

GOST R 8.683-2009: State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods

GOST R 8.684-2009: State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Verification methods

GOST R 8.685-2009: State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Verification methods

GOST R 8.686-2009: State system for ensuring the uniformity of measurements. A.C. balanced bridges. Verification methods

GOST R 8.687-2009: State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods

GOST R 8.689-2009: Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment.

GOST R 8.697-2010: State system for ensuring the uniformity of measurements. Interpenar spacings in crystals. Method for measurement by means of a transmission electron microscope

GOST R 8.700-2010: State system for ensuring the uniformity of measurements. Method of surface roughness effective height measurements by means of scanning probe atomic force microscope

GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles

GOST R 8.708-2010: State system for ensuring the uniformity of measurements. Piezosorption hygrometers. Verification procedure

GOST R 8.711-2013: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of complex dielectric permittivity in range of frequencies from 1 to 178,4 GHz

GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

GOST R 8.734-2011: State system for ensuring the uniformity of measurements. Intelligent sensors and intelligent measuring systems. Methods of metrological self-checking

GOST R 8.735.1-2011: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the state primary standard based on coulometric titration

GOST R 8.735.2-2013: State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of organic components in liquid and solid mediums and materials. Transfer of the units from the state primary standard based on liquid and gas chromate-mass-spectrometry with isotope dilution and gravimetry

GOST R 8.736-2011: State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles

GOST R 8.738-2011: State system for ensuring the uniformity of measurements. Field geophysical survey. Units of measured quantities

GOST R 8.739-2011: State system for ensuring the uniformity of measurements. Etalons for coordinate-temporal measurements. Basic principles. Ways for expressing the errors

GOST R 8.740-2011: State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Measurements procedure by turbine, rotary and vortex flow meters and gas meters

GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure

GOST R 8.758-2011: State system for ensuring the uniformity of measurements. Coulometric hygrometers. General specifications

GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles

GOST R 8.794-2012: State system for ensuring the uniformity of measurements. Ground laser scanners. Verification procedure

GOST R EN 13205-2010: Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations

GOST R ISO 15202-3-2008: Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 3. Analysis

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

M 20-2010: Recommendation. Accuracy standards for the quantitative chemical analysis of ferrous metallurgy materials

M 24-2012: Recommendation. Certification of methods (methods) of measurements of indicators of the composition and properties of objects of metallurgical production, industrial environmental monitoring, environmental monitoring, chemical factors of the industrial en

MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para

MI 1317-86: Guidelines. State system for ensuring uniformity of measurements. Results and characteristics of measurement error. Forms of representation. Methods of use when testing product samples and monitoring their parameters

MI 2267-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Metrological examination of technical documents

MI 2334-2002: State system for ensuring uniformity of measurements. Certified mixtures. General development requirements

MI 2336-2002: State system for ensuring uniformity of measurements. Indicators of accuracy, accuracy, precision of methods for quantitative chemical analysis. Assessment methods

MI 2453-2000: GSE. Methods of radiation monitoring. General requirements

MI 2634-2001: National Measurement Standards. Flow Rate and Quantity of Liquids and Gases. Method for the Determination of Allowable Range of Measurements and Metrological Characteristics of Measurement Complexes with Orifices

MI 2667-2004: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. The method of measurement using averaging tubes ANNUBAR DIAMOND II and ANNUBAR 485. Basic provisions

MI 2667-2011: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. Measurement techniques using averaging pressure tubes ANNUBAR DIAMOND II, ANNUBAR 285, ANNUBAR 485 and ANNUBAR 585. Basic provisions

MI 2731-2002: Recommendation. State system for ensuring uniformity of measurements. Oil flow rate of oil wells. Methods for performing measurements with the mass measurement installation of the type "ASMA"

MI 2803-2003: State system for ensuring uniformity of measurements. Systematic catalog of the state register of measuring instruments

MI 2808-2003: Recommendation. State system for ensuring uniformity of measurements. The amount of electrical energy. Measurement technique for the distribution of unbalances in the wholesale electricity market

MI 2837-2003: Oil hand-over and acceptance points metrological and technical support

MI 2971-2006: Recommendation. State system for ensuring uniformity of measurements. Technique and technology of works during calibration, calibration and adjustment of car scales using weighing car A-300

MI 2986-2006: Recommendation. State system for ensuring uniformity of measurements. Scales for static weighing according to GOST 29329-92 with LEL up to 600 kg with the automated workplace of the verifier (ARMP) manufactured by OOO Mera, Moscow. Method of verification

MI 3021-2006: State system for ensuring uniformity of measurements. Natural gas consumption. Methods of measurement measurement systems with flow meters-meters RS-SPA-M

MI 3082-2007: State system for ensuring uniformity of measurements. The choice of methods and means of measuring flow and the amount of consumed natural gas, depending on the operating conditions at metering stations Recommendations on the choice of working standards for their calibration

MI 3114-2008: State system for ensuring the uniformity of measurements. Automatic weighing instruments for weighing road vehicles in motion and determine the axial load on roadway. Methods of verification

MI 3145-2008: State system for ensuring uniformity of measurements. Small-sized heavy-duty scales for static weighing. Method of calibration using standard scales

MI 3174-2009: Recommendation. State system for ensuring uniformity of measurements. Establishing the traceability of certified values of reference materials

MI 3195-2009: Recommendation. State system for ensuring uniformity of measurements. Load power voltage transformers, the method of measurement without disconnecting circuits

MI 3196-2009: Recommendation. State system for ensuring uniformity of measurements. Secondary load current transformers. The method of measurement without disconnecting the circuit

MI 3212-2009: State system for ensuring uniformity of measurements. Consumption and quantity of natural gas. Measurement technique for determining the tightness of impulse lines of pines (pneumatic systems for measuring pressure drop and pressure) according to GOST 8.586. (1-5) -2005 measuring systems with restricting devices

MI 3213-2009: State system for ensuring uniformity of measurements. Consumption and volume of gas. Methods of measurement using ultrasonic flow transducers

MI 3235-2009: Recommendation. State system for ensuring uniformity of measurements. Turbine, rotational and vortex gas meters as part of gas metering stations. Method for determining the error (total uncertainty) of gas volume measurements in real conditions of operati

MI 3261-2010: State system for ensuring the uniformity of measurements. Means of measuring the concentration of dissolved oxygen in water. Methods of verification

MI 3278-2010: State system for ensuring uniformity of measurements. Scales non-automatic action. The method of determining the boundary values of the geographical area of operation of the scales and the necessary amendments for their adjustment

MI 3295-2010: State system for ensuring uniformity of measurements. The error rates of the balance of the handed over and received oil in JSC AK Transnefteprodukt

MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support

MI 3312-2011: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic flow transducers. Methods of calibration with a set of pipe piston calibration installation, in-line density converter and mass flow meters

MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil

MI 3350-2011: Recommendation. State system for ensuring uniformity of measurements. Turbine, rotational and vortex gas meters as part of gas metering stations. The method of calculating the error in measuring the volume of gas reduced to standard conditions

MU 64-02-002-2002: Organization and procedure for the execution of metrological examination of regulatory documents

MUK 4.1.035-17: The method of measuring the mass concentration of ammonium perchlorate in the washes from equipment surfaces, building structures, skin and personal protective equipment by the photometric method

NB ZhT TsSh 073-2003: Uncontrolled electro magnetic relays of first-class reliability, relay-based assemblies and racks. Safety Regulations

NVN 33-5.3.01-85: Sampling Instructions for Sewage Analysis

OST 95 10571-2002: Measurement system for the purpose of accounting and control of nuclear materials. Main provisions

PMG 35-2001: State system for ensuring the uniformity of measurements. Regulation on international specimen

PMG 92-2009: The metrological expert evaluation of interstate and national standarts projects

PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality

PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods

PNST 604-2022: Oil and gas industry. Subsea production systems. Use of subsea raw gas flow meters in distribution measurement systems

PR 50.2.019-2006: The state system of measurements. Methods of measurement using the turbine, rotary and vortex meters

R 50.1.025-2000: Energy conservation. Methods for estimation of accuracy and reproducibility of test results of energy efficiency indicators of products

R 50.1.026-2000: Energy conservation. Methods for assurance of energy efficiency indicators of products. General requirements

R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review

R 50.2.029-2003: State system for ensuring uniformity of measurements. Measurements in optoelectronics. Terms and Definitions. Part III. Measuring instruments and their elements

R 50.2.030-2003: National Measurement Standards. Area of Application of Standard Specimens of the Composition and Properties of Substances and Materials Under the Jurisdiction of Government Metrological Monitoring and Inspection

R 50.2.037-2004: State system for ensuring the uniformity of measurements. Underwater acoustic measurements. Terms and definitions

R 50.2.064-2009: State system for ensuring the uniformity of measurements. Spectrophotometrs for medical laboratories. Methods for verification

R 50.2.066-2009: State system for ensuring uniformity of measurements. Immunoassay analyzers. Method of verification

R 50.2.079-2011: State system for ensuring the uniformity of measurements. Coordinate time-domain measurements. Terms and definitions

R 50.4.003-2000: Inspection of Activity in GOST R Certification System of Accredited Testing Laboratories

R 52.08.630-2003: Recommendations. Level gauge float digital UOC. Measurement and results processing

R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation

RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.

RD 153-34.0-11.341-00: Method for Measurements of Quantity of Thermal Energy Released from Heat Sources in Piped Hot Water Heat Supply Systems

RD 153-34.0-11.342-00: Method for Measurements of Quantity of Thermal Energy Released from Heat Sources in Piped Steam Heat Supply Systems

RD 153-34.0-11.343-00: Method for Measurements of Flow Rate and Quantity of Steam Released from Heat Sources in Piped Steam Heat Supply Systems

RD 153-34.0-11.344-00: Method for Measurements of Pressure of Steam Released from Heat Sources in Piped Steam Heat Supply Systems

RD 153-34.0-11.345-00: Method for Measurements of Temperature of Steam Released from Heat Sources in Piped Steam Heat Supply Systems

RD 153-34.0-11.346-00: Method for Measurements of Flow Rate and Quantity of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems to Heat Source

RD 153-34.0-11.347-00: Method for Measurements of Temperature of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems at Heat Source

RD 153-34.0-11.348-00: Method for Measurements of Flow Rate and Quantity of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems at Heat Source

RD 153-34.0-11.349-00: Method for Measurements of Pressure of Condensate Returned from Heat Source of Piped Steam Heat Supply Systems and Cold Water Used as Feed Water

RD 153-34.0-11.350-00: Method for Measurements of Flow Rate and Quantity of Condensate Returned to Heat Source from Piped Steam Heat Supply Systems

RD 153-34.0-11.351-00: Method for Measurements of Temperature of Condensate Returned from Heat Source of Piped Steam Heat Supply Systems and Cold Water Used as Feed Water

RD 153-34.0-11.352-2001: Method for Measurements of Quantity of Thermal Energy and Heat Transfer Agent Released to Piped Hot Water Heat Supply Systems from Heat Source Using Ultrasonic Heat Meters

RD 153-34.0-15.502-2002: The leading document. Methodical instructions on control and the analysis of electric energy quality in general purpose power supply systems. Part 2. Analysis of electric energy quality.

RD 153-34.1-11.312-2000: Methods for measuring the air temperature behind the heaters of steam boilers at thermal power plants

RD 153-34.1-11.317-2001: Methods for measuring the temperature of feed water in thermal power plants

RD 153-34.1-11.318-2000: Methods for measuring the pressure of fresh steam behind the boiler and in front of the turbine stop valves in thermal power plants

RD 153-34.1-11.319-2001: Methods for measuring the temperature of fresh steam behind the boiler and in front of the turbine stop valves in thermal power plants

RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant

RD 153-39.4-113-01: Standards for technological design of main pipelines

RD 32.12-2002: Metrological support of tolerance control for railway transport.

RD 52.04.688-2006: Provision on methodological guidance for monitoring the state and pollution of the environment. Part 1. Meteorological, actinometric and heat balance observations

RD 52.04.716-2009: Rules of operation of civil aerodrome weather equipment.

RD 52.14.642-2003: Text documents. General requirements for composition, presentation, design, content and designation

RD 52.18.718-2008: Organization and procedure for the observation of soil pollution by toxicants of industrial origin

RD 52.18.750-2010: Mass concentration of phenols in waters. Measurement technique by high performance liquid chromatography using solid phase extraction. NGO "Typhoon"

RD EO 0515-2004: Standards of measurement accuracy of the main heat-engineering quantities for nuclear power plants with water-cooled power reactors VVER-1000

RMG 129-2013: State system for ensuring the uniformity of measurements. Requirements to the specialists in the sphere of ensuring of measurements uniformity, working in the field of legal metrology (experts-metrologists)

RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

RMG 43-2001: State system for ensuring the uniformity of measurements. The use of

RMG 52-2002: State system for ensuring the uniformity of measurements. General methological recommendations for the implementation of GOST 8.315-97 principles in the development and use of reference materials

RMG 57-2003: State system for ensuring the uniformity of measurements. Samples for monitoring the accuracy of the test results of food products. General provisions

RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development

RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

RMG 75-2004: State system for ensuring the uniformity of measurements. Measurements of substances moisture. Terms and definitions

ST SSFZhT TsE 136-2002: Telemechanics equipment traction substations. Typical certification test methods

STO 1.1.1.07.001.0675-2008: Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!