SNiP II-25-80
СНиП II-25-80
|
|
Wood constructions
Деревянные конструкции
Status: The document is not up to date. The updated version of SP 64.13330.2011 "Wooden structures" is in force
Standards should be observed in the design of wooden structures of new and reconstructed buildings and structures, as well as in the design of wooden poles for overhead power lines. The standards do not apply to the design of wooden structures of hydraulic structures, bridges, as well as structures of temporary buildings and structures
Нормы должны соблюдаться при проектировании деревянных конструкций новых и реконструируемых зданий и сооружений, а также при проектировании деревянных опор воздушных линий электропередачи. Нормы не распространяются на проектирование деревянных конструкций гидротехнических сооружений, мостов, а также конструкций временных зданий и сооружений
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/18/1980
SKU: RUSS151556
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.54 Wooden structures »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.20 Wooden structures »
The Document References:
GOST 13913-78: Laminated wood plastics. Specifications
GOST 15613.4-78: Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 20907-75: Liquid phenol formaldehyde resins. Specifications
GOST 21554.4-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in compression parallel to grain
GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain
GOST 21554.6-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in shearing parallel to grain
GOST 4.208-79: Quality rating system. Building. Timber glulam structures. Nomenclature of characteristics
The Document is Referenced By:
GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings
GOST 20850-84: Wooden laminated structures. General specifications
GOST 24258-88: Different types of scaffolding. General specifications
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 34329-2017: Formworks. General specifications
GOST 4981-87: Wooden joists. Specifications
GOST R 52169-2003: Children's playgrounds equipment. Safety of structure and test methods. General requirements
GOST R 52169-2012: Children’s playgrounds equipment and surfacing. Safety of structure and test methods. General requirements
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 55677-2013: Equipment children's sports grounds. Safety of structure and test methods. General requirements
GOST R 56439-2015: Sets of frame and awning shelters for sports grounds. General requirements
GOST R 56440-2015: Equipment the sports universal free access. Requirements and test methods taking into account safety
GOST R 56879-2016: Modified wood. Blanks for sleepers and poles of power lines. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.03.09-85: Design of asbestos-cement structures
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP II-25-80: Design Guide for Wooden Structures
MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes
MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 13-17.2000: Recommended Practice for Correction of Violations in the Maintenance and Use of Public Housing and Premises Thereof
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
MRR 2.2.07-98: Methods of Inspecting Buildings and Structures Prior to Their Rehabilitation and Alteration
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODN 218.015-01: Industry-Specific Road Standards for Placement of Billboards on Right-of-Ways and Roadsides of Public Roads and Highways
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
OSN-APK 2.10.16.001-04: Instructions for the manufacture and quality control of glued wooden structures for industrial agricultural buildings (in the development of SNiP II-25-80)
RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures
RD 34.21.521-91: Typical instructions for the technical operation of industrial buildings and structures of energy enterprises. Part 1. Organization of operation of buildings and structures
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SNiP 2.02.03-85: Pile foundations
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.10.04-85: Manual on design of greenhouses
SNiP 3.05.06-85: Electrical devices
SNiP 3.06.04-91: Bridges and pipes
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 17.13330.2011: Roofs
SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame
SP 31-113-2004: Swimming pools
SP 31-114-2004: Rules for the design of residential and public buildings for the construction in seismic areas
SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures
SP 55-102-2001: Structures made with gypsum fiber sheets
SP 91.13330.2012: Underground mine workings
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 50-301-96: Design of foundations and foundations of buildings and structures erected in the areas of permafrost soils. Komi Republic.
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system
TU 5366-002-50189474-07: Structural panels of chipboard with oriented chips and effective insulation for low-rise construction
VNTP 21-86: Standards for technological design of flotation plants for non-ferrous metal ores
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings
VSN 61-89(r): Rehabilitation and Renovation of Residential Occupancies. Design Standards
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 3. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
