Work Execution Requirements for Overhaul of Trunk Pipelines
Правила производства работ при капитальном ремонте магистральных газопроводов
Status: Not effective - Superseded
The rules apply to the overhaul of the linear part of gas pipelines with a diameter of up to 1,420 mm inclusive, laid in normal conditions, conditions of wetlands and permafrost. The standards do not apply to: field pipelines; site (technological) gas pipelines; main gas pipelines of ground and above-ground laying; subsea gas pipelines requiring the use of special means for the production of works; gas pipelines of the gas supply system.
Правила распространяются на производство капитального ремонта линейной части магистральных газопроводов диаметром до 1420 мм включительно, проложенных в нормальных условиях, условиях болот и многолетнемерзлых грунтов. Нормы не распространяются на: промысловые газопроводы; площадочные (технологические) газопроводы; магистральные газопроводы наземной и надземной прокладки; подводные газопроводы, требующие применения специальных средств для производства работ; газопроводы системы газоснабжения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: OJSC Gazprom,
2/20/1997
SKU: RUSS151612
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.2 Industrial safety requirements in oil and gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
As a Replacement Of:
VSN 2-112-79: Rules for the production of overhaul of the linear part of the main oil and gas pipelines
The Document References:
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 15836-79: Bitumen-rubber insulating mastic. Specifications
GOST 17.1.3.06-82: Nature protection. Hydrosphere. General requirements for protection of underground waters
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 17.5.3.04-83: Nature protection. Lands. Reclamation general requirements
GOST 17.5.3.06-85: Nature protection. Lands. Requirements for determination of the fertile soil layer standard disposal while performing earth-moving
GOST 23407-78: Fencings for building sites. Specifications
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents
SN 452-73: Standards for the Allocation of Land for Trunk Pipelines
SNiP 11-01-95: Instructions on the procedure of elaboration, coordination, approval, and composition of design documentation for construction of enterprises, buildings, and structures
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
VSN 004-88: Construction of trunk pipelines. Technology and management.
VSN 006-89: Construction Of Main And Field Pipelines Welding
VSN 007-88: Construction of Trunk and Field Pipelines. Design and Ballasting
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
VSN 011-88: Main pipeline and flowline construction. Bore cleaning and testing
VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works
VSN 013-88/Minneftegazstroj: Construction of main and field pipelines in permafrost
VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection
VSN 179-85: Guidelines for the Remediation of Lands Used for the Construction of Pipelines
VSN 51-1-80: Guidelines for Construction Practices Within Safety Zones of Trunk Pipelines Administered by the Ministry of the Gas Industry
The Document is Referenced By:
R Gazprom: Temporary technical requirements for equipment for opening pipelines
VRD 39-1.10-005-2000: Ordinance on Operation of Gas Distribution Stations of Trunk Gas Pipelines
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VRD 39-1.10-023-2001: Instructions for inspection and repair of gas pipelines subject to SCC, in pits
VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев
VRD 39-1.10-063-2002: Instructions for evaluating the performance and rejection of pipes with dents and corrugations
VRD 39-1.10-069-2002: Provisions on technical operation of gas distribution stations of gas mains
VRD 39-1.12-012-2000: Index of Standards Developed by Gazprom OAO Organizations and Facilities
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.