MDS 12-22.2005

МДС 12-22.2005

Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

Рекомендации по применению в строительном производстве требований нормативных правовых и иных нормативных актов, содержащих государственные нормативные требования охраны труда

Status: Effective

The recommendations are intended to be used in conjunction with SNiP 12-04-2002 in solving practical issues of labor protection in construction organizations, as well as in conducting training and testing knowledge of labor protection requirements of executives and specialists of construction organizations.

Рекомендации предназначены для использования совместно со СНиП 12-04-2002 при решении практических вопросов охраны труда в строительных организациях, а также при проведении обучения и проверке знаний требований охраны труда у руководящих работников и специалистов строительных организаций.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 291

Approved: FGU TsOTS Gosstroy of Russia, 4/19/2005

SKU: RUSS153380

Price: $3,883.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Reference documents » Policy letters, regulations, recommendations, etc. »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 4 Ensuring environmental safety during subsoil use » 4.2 Use and protection of subsoil » 4.2.2 Environmental safety requirements for subsoil use operations »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » I Legal and organizational basis of labor protection » 2 Labor Safety Management » 2.1 The main provisions of public administration of labor »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » I Legal and organizational basis of labor protection » 1 Basic labor protection requirements »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »


The Document References:

Federal Law 181-FZ: Fundamentals of Occupational Safety and Health in the Russian Federation

Federal Law 184-FZ: About technical regulation

Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 1033-79: Fatty cup grease. Specifications

GOST 10354-82: Polyethylene film Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10678-76: Thermal orthophosphoric acid. Specifications

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements

GOST 12.1.016-79: Work area air

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.026-76: Signal colors and safety signs

GOST 12.4.034-2001: Individual respiratory protective devices

GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications

GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements

GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification

GOST 12.4.107-82: Occupational safety standards system. Building. Safety ropes. General safety requirements

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 13837-79: General purpose dynamometers

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 166-89: Vernier callipers. Specifications

GOST 17187-81: Noise meters

GOST 17770-86: Manual machines

GOST 1779-83: Asbestos cord

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications

GOST 23407-78: Fencings for building sites. Specifications

GOST 23779-95: Asbestos paper

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24940-96: Buildings and structures. Methods of measuring luminance

GOST 25573-82: Freight handling rope slings for construction

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions

GOST 2697-83: Roofing asphalt felt. Specifications

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 27372-87: Travelling cradles for constructional works. Specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 2850-95: Asbestos paperboard

GOST 2930-62: Measuring instruments. Characters and signs

GOST 3069-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1 o.с. Dimensions

GOST 3071-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1 o.с. Dimensions

GOST 3077-80: Two lay rope type ЛК-О construction 6x19 (1+9+9)+1 o.с. Dimensions

GOST 3079-80: Two lay rope type ТЛК-О construction 6x37 (1+6+15+15)+1 o.с. Dimensions

GOST 3241-91: Steel ropes

GOST 3242-79: Welded joints

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 380-94: Normal quality carbon steel

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 5378-88: Vernier protractors. Specifications

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs

GOST 6102-94: Asbestos fabric

GOST 6465-76: Enamels PF-115. Specifications

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7668-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions

GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure

GOST 8486-86: Coniferous sawn timber. Specifications

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.402-80: Metal surface preparation for painting

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements

GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 50849-96: Safety belts constructions. General specifications. Test methods

GOST R 51248-99: Overland rail crane tracks. Principal specifications

PB 03-428-02: Safety Requirements for Construction of Underground Structures

PB 03-498-02: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-14-92: Codes for installation and safe operation of lifting cranes

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

PB 10-518-02: Rules for design and safe operation of construction hoists

PB 10-611-03: Installation and safe operation of hoists (towers)

PB 13-407-01: Uniform Safety Requirements for Blasting Operations

POT R M-001-97: Rules for labor protection in logging, woodworking and forestry operations

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation

PPB 01-93*: Fire Safety Rules in the Russian Federation

PPB-05-86: Fire Safety Regulations for the Execution of Construction and Installation Work

RD 03-444-02: The provision of procedure for training and qualification test of workers of organizations engaging in activities of industrial safety of hazardous industrial sites under supervision of Gosgortekhnadzor, Russia

RD 04-265-99: Regulations of training and official evaluation of employees of enterprises operating hazardous production facilities under control of the Gosgortekhnadzor of Russia

SanPiN 2.2.3.1384-03: Hygienic requirements to organizations of civil execution and civil works

SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials

SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-03-99: Occupational safety in construction part one. General safety requirements

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SNiP 2.02.05-87: Foundations of dynamic load machines

SNiP 2.03.06-85: Aluminium structures

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 3.02.01-87: Earthen structures, foundation and basis

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities

SNiP II-25-80: Wood constructions

SP 12-135-2003: Safety in construction. Industry standard safety instructions. To replace SP 12-135-2002

SP 12-136-2002: Decisions regarding labor protection and industrial safety in construction organization plans and work execution plans

The Document is Referenced By:

SP 389.1326000.2018: Technical operation of seaport infrastructure facilities

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!