MDS 13-24.2010
МДС 13-24.2010
|
|
Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
Рекомендации по правилам геотехнического сопровождения высотного строительства и прилегающего пространства
Status: Effective
The recommendations set out the general concept of geotechnical support of high-rise construction as a full-fledged complex of geological, geodetic, environmental and other types of engineering surveys (including monitoring), taking into account the conditions of construction and operation of buildings in Moscow.
В рекомендациях изложена общая концепция геотехнического сопровождения высотного строительства как полноценного комплекса геологических, геодезических, экологических и прочих видов инженерных изысканий (в том числе мониторинга) с учетом условий строительства и эксплуатации зданий в Москве.
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS153417
The Product is Contained in the Following Classifiers:
Construction (Max) »
Reference documents »
Policy letters, regulations, recommendations, etc. »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.30 Residential buildings »
The Document References:
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 17.0.0.02-79: Nature protection. Metrological assurance of the control over the contamination of the atmosphere, surface waters and soil.
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 20522-96: Soils. Statistical treatment of the test results
GOST 21.101-97: System of design documents for construction Main requirements for design and working documents
GOST 21.302-96: System of design documents for construction Graphic symbols for engineering geological investigation documents
GOST 21615-76: Resistive-strain sensors. Methods for determining characteristics
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 24846-81: Soils. Measuring methods of strains of structures and buildings bases
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO 9001-2008: Quality management systems. Requirements
Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MDS 11-7.2000: Guidelines to the Scope, Development, Review, and Approval of Urban Planning Documentation
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 13-22.2009: Methods of geodetic monitoring of the technical condition of high-rise buildings and unique buildings and structures
MDS 20-1.2006: Temporary recommendations on the designation of loads and impacts acting on multifunctional high-rise buildings and complexes in Moscow
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
RDS 11-201-95: Instructions on the procedure for conducting state examination of construction projects
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 12-01-2004: Organization of construction
SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design
SNiP 2.02.03-85: Pile foundations
SNiP 22-01-95: Geophysics of hazard natural process
SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 11-101-95: Procedure of Development, Coordination, Approval and Composition of Feasibility Studies for Construction of Enterprises, Buildings and Structures
SP 11-102-97: Engineering environmental site investigations for construction
SP 11-104-97: Collection of rules for engineering surveys for construction. Engineering-geodetic surveys for construction
SP 11-105-97: Engineering and geological survey for construction
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TSN 12-309-2000: Acceptance and commissioning of completed construction projects. Basics
TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures
TSN 50-304-2001: Basements, foundations, and underground constructions
VSN 2-85: City of Moscow Urban Development Code
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.