State system for ensuring uniformity of measurements. Fuel dispensers. Method of verification
Колонки топливораздаточные. Методика поверки
Status: Partially effective
Guidelines apply to fuel dispensers in accordance with GOST 9018-82 and establish the methodology for their primary and periodic verification. It is allowed to verify, according to the present guidelines, columns issued prior to the introduction of GOST 9018-82 and imported, state-approved acceptance tests according to GOST 8.001-80 or metrological certification according to GOST 8.326-78, having technical characteristics similar to those specified in GOST 9018-82.
Методические указания распространяются на топливораздаточные колонки по ГОСТ 9018-82 и устанавливают методику их первичной и периодической поверок. Допускается поверять по настоящим методическим указаниям колонки, выпущенные до введения ГОСТ 9018-82, и импортные, прошедшие государственные приемочные испытания по ГОСТ 8.001-80 или метрологическую аттестацию по ГОСТ 8.326-78, имеющие технические характеристики, аналогичные указанным в ГОСТ 9018-82.
Choose Language:
Format: Electronic (pdf/doc)
Approved: All-Russian Research Institute of Flow Measurement,
12/10/1987
SKU: RUSS153770
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.3 Verification, calibration and testing of measuring instruments »
2.3.3 Measurement of flow parameters, flow rate, level, volume of substances »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.060 Measurements of volume, mass, density, viscosity »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
17.120.10 Flow in closed channels »
The Document References:
GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 2405-80: Pressure gauges, vacuum gauges and flow meters, indicating. General specifications
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 2823-73: Glass technical thermometers. Specification
GOST 305-82: Diesel fuel. Specifications
GOST 5072-79: Mechanical stop-watches. Specification
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.045-80: The State Measurement System. Fuel dispensing pumps. Methods and means of verification
GOST 8.326-78: The State Measurement System. Metrological assurance of development, manufacturing and operation of unstandardized measuring instruments. General principles
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.400-80: State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
GOST 9018-82: Fuel dispensing pumps. General specifications
GOST 9018-89: Fuel dispensing pumps. General specifications
The Document is Referenced By:
MI 2322-99: Recommendation. State system for ensuring uniformity of measurements. Typical norms of time for calibration of measuring instruments
MI 2504-98: Recommendation. State system for ensuring uniformity of measurements. Fuel dispensers. Method of testing using the M2r-SS mermers
MP 459-2019: GSI. Fuel dispenser "Kamka"
MP 459-2019: GSI. Fuel dispenser "Kamka"
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
