State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
Государственная система обеспечения единства измерений. Классификация и применение технических средств испытаний нефти и нефтепродуктов
Status: Effective
The recommendation applies to technical means of testing oil, petroleum products and petrochemical products in operation, and establishes their classification based on standards and other regulatory documents on test methods (analysis, determination, control).
Рекомендация распространяется на технические средства испытаний нефти, нефтепродуктов и продуктов нефтехимического производства, находящиеся в эксплуатации, и устанавливает их классификацию на основе стандартов и других нормативных документов на методы испытаний (анализа, определения, контроля).
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS154056
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
GOST 10120-71: Petroleum paraffins. Method for the determination of fraction composition
GOST 10306-75: Lubricating oils. Method of evaporation loss in dynamic conditions
GOST 10364-90: Petroleum and petroleum products. Method for determination of vanadium
GOST 1036-75: Plastic lubricants. Method of determination of mechanical impurities
GOST 10577-78: Petroleum products. Method for the determination of mechanical impurities
GOST 1057-88: Solvent refined oils. Method for the determination of phenol and cresol content
GOST 10679-76: Liquefied hydrocarbon gases. Method for determination of the hydrocarbon compound
GOST 10734-64: Lubricating oils containing additives. Method for determination of detergen potential
GOST 11011-85: Petroleum and its products. Method for determination of fraction composition by apparatus APH-2
GOST 11063-77: Motor oils containing additives. Method for determination of stabilization by inductive period of sedimentation
GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 11382-76: Refinery gases. Method of test for sulphurated hydrogen content
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11512-65: Petroleum bitumen. Method for determination of ash content
GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition
GOST 12068-66: Mineral oils. Method for determination of demulsification time
GOST 12275-66: Lubricating oils and additives. Method for determination of degree of cleanliness
GOST 12329-77: Petroleum products and hydrocarbon solvents. Method for determination of aniline point and aromatic hydrocarbons
GOST 12417-94: Petroleum products. Method for determination of sulphated ash
GOST 13003-88: Insulating oils. Method of gas stability determination in electric field
GOST 13005-67: Interferometers for determination of liquid and gas concentration. Methods and means for verification
GOST 13210-72: Benzenes. Determination of plumbum content by complexometric titration
GOST 13300-67: Motor oils. Method for the determination of corrosive properties and oxidability at П33 plant
GOST 13301-67: Organic chemical products. Method of test for microdetermination of nitrogen
GOST 13379-82: Petroleum. Determination of C1-C6 hydrocarbons by method of gas chromatography
GOST 13380-81: Petroleum products. Method for determination of sulphur microadmixtures
GOST 13538-68: Additives and lubricating oils with additives. Method for determination of barium, calcium and zinc contents by complexonometric titration
GOST 13718-68: Torque (torsional) balances. Methods and means of verification
GOST 13782-68: General-purpose spring dynamometers. Methods and means of verification
GOST 13844-68: Technical metallic gauges. Methods and means of verification
GOST 14038-78: Shale oils. Method for determination of mechanical impurities and ash
GOST 1431-85: Petroleum products and additives. Method for the determination of sulfur by fusing in a crucible
GOST 1437-75: Dark petroleum products accelerated method for determination of sulfur
GOST 1461-75: Petroleum and petroleum products. Method of ash test
GOST 14920-79: Dry gas. Method for determination of component composition
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 1520-84: Selectively refined oils. Method for determination of furfural presence in oils
GOST 1547-84: Oils and greases. Methods for determination of water presence
GOST 1567-97: Petroleum products. Motor gasoline and aviation fuels. Determination of gum content by jet evaporation method
GOST 15823-70: Oils and lubricants. Method for determination of the saturated vapour pressure
GOST 15886-70: Mineral oils. Method for the determination of gum
GOST 17320-71: State system for ensuring the uniformity of measurements. Plain gauges for dimensions over 500 mm. Verification methods and means
GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration
GOST 17362-71: Mineral oils. Method of determination of saponification number
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 17749-72: Jet fuel. Spectrophotometric method for the determination of bicycles aromatic (naphthalene hydrocarbons) content
GOST 17750-72: Jet fuel. Method for the determination luminometric number on the ПЛЧT instrument
GOST 17751-79: Jet fuel. Method of test for thermal oxidation stability under dynamic conditions
GOST 17789-72: Petroleum bitumens. Method for determination of paraffin content
GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus
GOST 18180-72: Petroleum bitumen. Method for determination of change of mass after hitting
GOST 18597-73: Motor fuel. Corrosion testing under water condensation conditions
GOST 18598-73: Jet fuel. Method of defining corroding activity
GOST 19006-73: Motor fuel. Method for determination of the filtering factor
GOST 19121-73: Petroleum Products Determination of sulphur content by lamp method
GOST 19199-73: Lubricating oils. Method for determination of anticorrosive properties
GOST 19295-73: Lubricating greases. Method of mechanical stability determination
GOST 19296-73: Petroleum oils. Test for soda reaction from petroleum oils. Photoelectric colorimeter method
GOST 1929-87: Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter
GOST 19678-74: Vacuum oils. Method for determination of vapour pressure and boiling point
GOST 19932-99: Petroleum products. Determination of carbon residue. Conradson method
GOST 20242-74: Additives and oils containing additives. Method for determination of chlorine
GOST 20284-74: Petroleum products. Method for determination of colour on colorimeter ЦНТ
GOST 20287-91: Petroleum products Method of test for flow point and pour point
GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'
GOST 20303-74: Motor oils. Method of estimation of detergent characteristics of oils by installation ИМ-1
GOST 20457-75: Motor oils. Method of test for antioxidzing properties by installation ИКМ
GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility
GOST 20534-75: Taper shank end mills with solid carbide tips. Construction and dimensions
GOST 20684-75: Used motor oils. Method for determination of insoluble sediments
GOST 2070-82: Light petroleum products. Methods for determination of iodine numbers and content of unsaturated hydrocarbons
GOST 20739-75: Petroleum bitumens. Method for determination of solubility
GOST 20924-75: Automobile and aviation gasoline. Method for determination of colour intensity
GOST 20991-75: Motor oils. Method of testing their tendency to form deposits at high temperatures
GOST 20994-75: Motor oils. Method of testing their tendency to form deposits at low temperatures
GOST 21058-75: Aviation hydraulic fluids and lubrication oils. Method for determination of foaming characteristics
GOST 21103-75: Lets fuels. Method of test for naphthene soaps
GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value
GOST 21490-76: Motor oils. Method of test detergent properties by the installation 'УИM-6-НАТИ'
GOST 21534-76: Petroleum The determination of chloride salts content
GOST 21749-76: Petroleum products. The method for determination of saponification value and free fats content
GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics
GOST 22054-76: Motor and aviation gasoline. Method for the evaluation of chemical stability
GOST 22055-76: Motor gasoline. Method for evaluation of gasoline ability to vapour lock formation
GOST 22254-92: Diesel fuels. Cold filter method for determination of lowest filtering temperature
GOST 22385-94: Synthetic fat acids. Photometric method for determination of ester value
GOST 23175-78: Lubricating oils. Method for determination of motor properties and thermal-oxidative stability
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 25337-82: Petroleum paraffin. Method for the determination of colour on colorimeter KNS-2
GOST 25559-82: Liquid petroleum paraffin. Method for determination of impurities content and calculation of n-alkenes content
GOST 25771-83: Paraffin and ceresines. Method of penetration test by needle
GOST 26581-85: Greases. Method of test for effective viscosity on a rotary viscosimeter
GOST 2667-82: Light petroleum products. Method for determination of colour
GOST 26950-86: Soils. Method for determination of exchangeable sodium
GOST 2706.2-74: Benzene hydrocarbons and allied products. Chromatographic method of determination of main substance and impurities content in benzene, toluene and xylene
GOST 27583-88: Hen eggs for food
GOST 27808-88: Liquid petroleum paraffin. Determination of aromatic hydrocarbons by spectrophotometric method
GOST 28582-90: Petroleum products. Method for determination of colour
GOST 28781-90: Petroleum and petroleum products. Method for determination of saturated vapours pressure by mechanical dispersing
GOST 28828-90: Benzenes. Method for determination of plumbum
GOST 29040-91: Gasoline. Method of determination of benzene and total aromatics
GOST 29064-91: Fuel oils for turbine and piston engines. Express-methods for quality control
GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals
GOST 29255-91: Petroleum products and lubricating oils. Neutralization number. Colour indicator titration method
GOST 30050-93: Petroleum products. Total base number. Perchloric acid potentiometric titration method
GOST 3122-67: Diesel fuel Method for determination of cetane index
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 3338-68: Aviation gasolines. Method for determination of performance number by rich mixture
GOST 3877-88: Petroleum products. Determination of sulfur by calorimetric bomb method
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 4039-88: Automobile gasolines. Methods of test for induction period
GOST 4255-75: Petroleum products. Method for determination of melting point by Zhukov
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4338-91: Aviation turbine fuels. Determination of smoke point
GOST 511-82: Fuel for engines. Motor method for determination of octane number
GOST 5211-85: Lubricating greases. Method for determination of soap, mineral oil and high-molecular organic acids percentage
GOST 5346-78: Plastic lubricants. Methods for determination of penetration with the conical penetrometer
GOST 5726-53: Lubricating oils with additives. Method of the determination of washing properties
GOST 5734-76: Greases method for the determination of oxidation stability
GOST 5985-79: Petroleum products. Method for determination of acidity and acid number
GOST 6037-75: Lubricating greases. Method for the determination of creeping tendency
GOST 6073-75: Ethylated benzines. The methods for determination of the content of bromine and chlorine scavengers
GOST 6243-75: Emulsols and pastes. Test methods
GOST 6258-85: Petroleum products method for determination of assumed viscosity
GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies
GOST 6321-92: Engine fuels. Method for copper strip test
GOST 6350-56: Lubricating oils of selective cleaning. Qualitative method of nitrobenzene content
GOST 6356-75: Petroleum products. Method of test for flash point boy closed cup
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 6667-75: Aviation gasoline. Period of stability method
GOST 6707-76: Lubricating greases. Method for determination of free alkalies and free organic acids
GOST 6793-74: Petroleum products. Method of drop point determination
GOST 6994-74: White petroleum products. Method for determination of aromatic hydrocarbons
GOST 7142-74: Lubricating greases. Methods for determination of oil separation
GOST 7143-73: Greases. Method for determination of ultimate strength and thermostrengthening
GOST 7163-84: Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
GOST 7423-55: Aviation petrols. Determination of paraoxydiphenylamine content
GOST 7978-74: Gasoline solvents. Method for determination of tetraethyl lead presence
GOST 8.003-83: State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification
GOST 8.005-2002: State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification
GOST 8.012-72: State system for ensuring the uniformity of measurements. Methods and means for verification of pyrometric millivoltmeters
GOST 8.024-2002: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring density
GOST 8.025-96: State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids
GOST 8.053-73: State system for ensuring the uniformity of measurements. Pressure, combined pressure-vacuum, vacuum, gauges and draught gauges with pneumatic output signals. Methods of verification
GOST 8.092-73: State system for ensuring the uniformity of measurements. Pressure gauges, vacuum pressure gauges, vacuum manometers, draught gauges, delivery head meters and draught head gauges with unified electric (current) output signals. Methods and means of verification
GOST 8.096-82: State system for ensuring the uniformity of measurements. The 1-st order micro manometers of МКМ-type. Methods and means of verification
GOST 8.100-73: State system for ensuring the uniformity of measurements. Volumetric glass ware, standard. Methods and means of verification
GOST 8.111-74: The state system for ensuring the uniformity of measurements. Dead-weight compound pressure and vacuum gauges, МВП-2,5 type. Verification methods and means
GOST 8.120-99: State system for ensuring the uniformity of measurement. State verification schedule for means measuring pH
GOST 8.122-99: State system for ensuring the uniformity of measurements. Rotameters. Methods of verification
GOST 8.130-74: State system for ensuring the uniformity of measurements. General purpose visual pyrometers with disappearing filament. Verification methods and means
GOST 8.146-75: State system for ensuring the uniformity of measurements. Indicating and recording pressure gauge with integrator of SSI. Methods of verification
GOST 8.156-83: State system for ensuring the uniformity of measurements. Cold water meters. Verification methods and means
GOST 8.234-77: State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification
GOST 8.240-77: State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification
GOST 8.243-77: State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified mutual inductance output parameters of the SSI. Methods and means of verification
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8.255-2003: State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.269-77: State system for ensuring the uniformity of measurements. Measuring glass burettes for chemical non-automatic gas analysers. Methods and means of verification
GOST 8.279-78: State system for ensuring the uniformity of measurements. Glass liquid working thermometers. Calibration methods
GOST 8.286-78: State system for ensuring the uniformity of measurements. Electrical timemeters. Methods and means for verification
GOST 8.298-78: State system ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Methods and means of calibration
GOST 8.302-78: State system for ensuring the uniformity of measurements. Compensated fluid micromanometers with micrometric screw, type МКВ-250. Methods and means of verification
GOST 8.321-78: State system for ensuring the uniformity of measurements. Industrial applicator level gauges and float-type level gauges. Methods and means of calibration
GOST 8.324-2002: State system for ensuring the uniformity of measurements. Gas meters. Calibration methods
GOST 8.338-2002: State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure
GOST 8.340-78: State system for ensuring the uniformity of measurements. Dead-weight tester type МП-0,4 methods and means of verification
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8.359-79: State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification
GOST 8.400-80: State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
GOST 8.409-81: State system for ensuring the uniformity of measurements. Ohmmeters. Methods and means of calibration
GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification
GOST 8.422-81: State system for ensuring the uniformity of measurements. Frequency meters. Methods and means for verification
GOST 8.423-81: State system for ensuring the uniformity of measurements. Mechanical stop-watches. Methods and means for verification
GOST 8.427-81: State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers. Methods and means of calibration
GOST 8.451-81: State system of ensuring the uniformity of measurements. Positive displacement liquid meters. Methods and means for verification
GOST 8.461-82: State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration
GOST 8.469-2002: State system for ensuring the uniformity of measurements. Automatic continuous proportional weighers. Methods and means of verification
GOST 8.479-82: State system for ensuring the uniformity of measurements. Piston pressure gauges. Methods and means of verification
GOST 8.485-83: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Methods and means of verification
GOST 8.497-83: State system for ensuring the uniformity of measurements. Ampere meters, voltmeters, watt meters, varmeters. Calibration methods
GOST 8.520-84: State system of ensuring the uniformity of measurements. General purpose balances and reference balances. Rules and procedure for verification
GOST 8.524-85: State system for ensuring the uniformity of measurements. Psychometric tables. Constitution, content, calculating correlations
GOST 8226-82: Fuel for engines. Research method for determination of octane number
GOST 8489-85: Motor fuel. Method for determination of existent gums (Budarov's)
GOST 8674-58: Petroleum products. Determination of fractional composition by evaporation method
GOST 8852-74: Petroleum products. Method of test for coking by apparatus 'LKN-70'
GOST 8997-89: Petroleum products. Electrometric method for determination of bromine numbers and unsaturated hydrocarbons
GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property
GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals
GOST 9090-2000: Petroleum paraffins. Method for determination of oil content
GOST 9144-79: Engine Fuels. Method for determination of thermal stability in static conditions
GOST 9270-86: Oils and greases. Method for determination of mechanical impurities in counting chamber
GOST 9490-75: Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
GOST 9536-79: Isobutyl alcohol. Specifications
GOST 9566-74: Greases. Method for determination of evaporability
GOST 981-75: Mineral oils. Method for determination of oxidation stability
GOST 9827-75: Additives and additive containing oils. Method for determination of phosphorus
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
MI 1031-85: Guidelines. Thermocouples with a unified output signal of the type TSPU-0183, TSMU-0283, THAU-0383, TPPU-0483. Method of verification
MI 1319-86: State system for ensuring uniformity of measurements. Density sensors "Solartron" type 7830. Calibration method
MI 140-89: State system for ensuring uniformity of measurements. Vacuum gauges. Verification procedure
MI 1540-91: State system for ensuring uniformity of measurements. Dispensers weight discrete action. Method of verification
MI 1573-86: State system for ensuring uniformity of measurements. Refractometers IRF 460 and IRF-464. Verification procedure
MI 1574-86: State system for ensuring uniformity of measurements. Refractometer IRF 454. Verification procedure
MI 1619-87: State system for ensuring uniformity of measurements. PH meter and ionomer converter, pH meter kits. Method of verification
MI 1711-87: State system for ensuring uniformity of measurements. Household scales. Verification procedure
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
MI 1744-87: State system for ensuring uniformity of measurements. Thermoelectric temperature transducers of platinum-platinum-platinum exemplary type PPO. Method of verification
MI 1747-87: Guidelines. State system for ensuring uniformity of measurements. Mass measures exemplary and general purpose. Method of verification
MI 1770-87: State system for ensuring uniformity of measurements. Glass electrodes for determining the activity of hydrogen ions. Method of verification
MI 1772-87: State system for ensuring uniformity of measurements. Auxiliary electrodes for potentiometric measurements. Method of verification
MI 1773-87: State system for ensuring uniformity of measurements. The reference electrode silver chloride saturated exemplary 2nd discharge. Method of verification
MI 1802-87: Guidelines. State system for ensuring uniformity of measurements. Meteorological membrane barometers. Method of verification
MI 1823-87: State system for ensuring uniformity of measurements. Capacity steel vertical cylindrical tanks. The method of measurement using geometric and volumetric methods
MI 1895-88: State system for ensuring uniformity of measurements. Mercury manometers type IBE. Method of verification
MI 1914-88: State system for ensuring uniformity of measurements. Areometers glass. Method of verification
MI 1928-88: State system for ensuring uniformity of measurements. Indicators lever and gear with the price of division of 0,01 mm. Method of verification
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure
MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification
MI 2035-95: Recommendation. State system for ensuring uniformity of measurements. Central processing units and data display, summing and secondary devices of turbine flow transducers that make up the oil metering stations. Test method
MI 2102-90: National Measurement Assurance System. Pressure gauges and vacuum deformation, standard, with nominal scales
MI 2124-90: State system for ensuring uniformity of measurements. Pressure gauges, vacuum gauges, vacuum gauges, pressure gauges, pressure gauges and pressure gauges showing and recording. Method of verification
MI 2131-90: Goniometers with nonius
MI 2145-91: National Measurement Assurance System. Pressure gauges and vacuum deformation, with nominal scales
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification
MI 2196-92: Depth gauges
MI 2314-2006: Recommendation. State system for ensuring uniformity of measurements. Codifier of groups of measuring instruments
MI 2326-95: State system for ensuring uniformity of measurements. Fluid density sensors vibration firm "Schlumberger". Method of verification
MI 2349-95: State system for ensuring uniformity of measurements. pH meters types Сorning 130 (135), pH 100, pH 300, pH 500, pH 3000. Calibration method
MI 2353-95: State system for ensuring uniformity of measurements. Calorimeter gas automatic model 66. Calibration method
MI 2402-97: National Measurement Standards. Analytical Laboratory Gas Chomatographs. Verification Methods
MI 442-84: State system for ensuring uniformity of measurements. Photoelectric concentration colorimeter KFK-2MP. Verification procedure
MI 487-84: State system for ensuring uniformity of measurements. Viscometer rotational "Reogest 2.1". Method of verification
MI 584-84: Guidelines. Turbine flow converters workers. Method of verification
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
RD 50-211-80: Guidelines. Flow meters and flow meters and gas quantities. Methods and means of verification
RD 50-274-81: Methodological instructions. Dynamometers for variable forces ДПС. Methods and means of verification.
RD 50-290-81: Procedural Guidelines. Instruments for Analysis of Sulfur Content in Oil. Verification Methods and Means
RD 50-294-81: Guidelines. Vibration density meter. Methods and means of verification
RD 50-388-83: Methodological instructions. Standard liquid –level gauges. Methods and means of verification.
The Document is Referenced By:
MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
RD 153-00.0-006-99: Sectoral system for ensuring the uniformity of measurements in the fuel and energy complex. Metrological control and supervision in the fuel and energy complex
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.