MI 2955-2010
МИ 2955-2010
|
|
Recommendation. State system for ensuring uniformity of measurements. Typical methods of certification of software measuring devices
Рекомендация. Государственная система обеспечения единства измерений. Типовая методика аттестации программного обеспечения средств измерений
Status: Effective
The recommendation was developed in order to implement the requirements for software of measuring instruments in accordance with Article 9 of the Federal Law of the Russian Federation dated June 26, 2008 No. 102-ФЗ “On Ensuring the Uniformity of Measurements”, the Procedure for testing standard samples or measuring instruments for the purpose of type approval The procedure for issuing certificates of approval for the type of reference materials or the type of measuring instruments, establishing and changing the period of validity of the said certificates and the interval between verification of measuring instruments, approved by order of the Ministry of Industry and Trade of Russia dated November 30, 2009 No. 1081, the national standard GOST R 8.654 and other regulatory documents specified in section 2 of the recommendation. The recommendation contains a description of the standard methodology for certification of SI software. The recommendation applies to: - SI software, including measuring, information-measuring systems; - software automated control systems operating with the use of SI or components of the measuring systems; - software controllers, computing units that are not part of the measuring systems, as well as technical systems and devices with measuring functions that process and present measurement information.
Рекомендация разработана в целях реализации требований к программному обеспечению средств измерений в соответствии со статьей 9 Федерального закона Российской Федерации от 26 июня 2008 г. № 102-ФЗ «Об обеспечении единства измерений», Порядком проведения испытаний стандартных образцов или средств измерений в целях утверждения типа и Порядком выдачи свидетельств об утверждении типа стандартных образцов или типа средств измерений, установления и изменения срока действия указанных свидетельств и интервала между поверками средств измерений, утвержденных приказом Минпромторга России от 30 ноября 2009 г. № 1081, национальным стандартом ГОСТ Р 8.654 и другими нормативными документами, указанными в разделе 2 рекомендации. Рекомендация содержит описание типовой методики аттестации ПО СИ. Рекомендация распространяется на: - ПО СИ, в том числе измерительных, информационно-измерительных систем; - ПО автоматизированных систем управления, функционирующих с использованием СИ или компонентов измерительных систем; - ПО контроллеров, вычислительных блоков, не входящих в состав измерительных систем, а также технических систем и устройств с измерительными функциями, осуществляющих обработку и представление измерительной информации.
Choose Language:
Format: Electronic (pdf/doc)
Approved: FSUE VNIIMS,
5/24/2010
SKU: RUSS154310
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.3 Accreditation infield of ensuring uniformity of measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
As a Replacement Of:
MI 2955-2005: GSE. Typical methods of certification of software measuring devices and the order of its implementation
The Document References:
GOST 19.201-78: Unified system for program documentation. Technical specifications for development. Requirements to contents and form of presentation
GOST 19.202-78: Unified system for program documentation. Specification. Requirements to contents and form of presentation
GOST 19.401-78: Unified system for program documentation. Text of program. Requirements to contents and form of presentation
GOST 19.502-78: Unified system for program documentation. Description of use. Requirements for contents and form of presentation
GOST 19.701-90: Unified system for program documentation. Data, program and system flowcharts, program network charts and system resources charts. Documentation symbols and convention for flowcharting
GOST 30319.0-96: Natural gas. Methods of calculation of physical properties
GOST 30319.1-96: Natural gas. Methods for the evaluation of physical properties
GOST 30319.2-96: Natural gas. Methods of calculation of physical properties
GOST 30319.3-96: Natural gas. Methods of calculation of physical properties. Definition of physical properties by equation of state
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST 8.586.3-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
GOST 8.586.4-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements
GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
The Document is Referenced By:
GOST 33896-2016: Centralized traffic and dispatching control systems of trains movement. Safety requirements and methods of checking
GOST R 54899-2012: Centralised traffic and dispatching control systems movement of trains. Safety requirements and methods of checking
GOST R 55867-2013: Air transport. Metrological support on air transport. General principles
GOST R 8.654-2015: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements
GOST R 8.818-2013: State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles
MI 3286-2010: Recommendation. Verifying software protection and determining its level when testing measuring instruments for type approval
MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
R 50.2.077-2011: State system for ensuring the uniformity of measurements. Pattern evaluation of a measuring instrument for pattern approval. Software validation for protection assurance
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
