MI 3020-2006
МИ 3020-2006
|
|
State system for ensuring uniformity of measurements. Tanks (tanks) steel horizontal cylindrical river bulk vessels (barges). Method of verification by the geometric method
Государственная система обеспечения единства измерений. Резервуары (танки) стальные горизонтальные цилиндрические речных наливных судов (барж). Методика поверки геометрическим методом
Status: Effective - Introduced for the first time
The recommendation applies to steel horizontal cylindrical tanks (tanks) with a nominal capacity of 511, 516, 601 m3 of river bulk vessels (barges) of the type “pr.16802”; 198, 205, 318, 409 m3 of river bulk vessels (barges) of the type “pr.81631”; 190, 285 m3 of river bulk vessels (barges) of the type “pr.KN-16801” intended for transportation of oil and oil products, carrying out state accounting and trade operations, mutual settlements between the supplier and the consumer, tested for the purposes of type approval. The verification interval is set to not more than 5 years, unless a different verification interval is established during the type approval. This recommendation was developed taking into account the requirements of MP71, MP95 OIML.
Рекомендация распространяется на стальные горизонтальные цилиндрические резервуары (танки) номинальными вместимостями 511, 516, 601 м3 речных наливных судов (барж) типа «пр.16802»; 198, 205, 318, 409 м3 речных наливных судов (барж) типа «пр.81631»; 190, 285 м3 речных наливных судов (барж) типа «пр.КН-16801», предназначенных для перевозки нефти и нефтепродуктов, проведения государственных учетных и торговых операций, взаимных расчетов между поставщиком и потребителем, прошедших испытания для целей утверждения типа. Межповерочный интервал установлен не более 5 лет, если при утверждении типа не установлен иной межповерочный интервал. Настоящая рекомендация разработана с учетом требований МР71, МР95 МОЗМ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: FSUE VNIIR-GNMTS,
11/28/2006
SKU: RUSS154332
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.3 Verification, calibration and testing of measuring instruments »
2.3.3 Measurement of flow parameters, flow rate, level, volume of substances »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements
GOST 12.4.010-75: Means of individual protection protective mittens
GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications
GOST 12.4.111-82: Men's suits for protection against oil and products of oil processing
GOST 12.4.112-82: Women’s suites for protection from oil and oil products
GOST 12.4.137-2001: Special shoes with leather upper for the protection from oil, oil products, acids, alkali non-toxic and explosive dangerous dust. Technical specifications.
GOST 12.4.137-84: Special leather footwear for protection from petroleum, petroleum products, acids, alkalis, non-toxic and explosive dust
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13837-79: General purpose dynamometers
GOST 166-89: Vernier callipers. Specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 51330.19-99: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapors relating to the use of electrical apparatus
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
