GOST 8969-75

ГОСТ 8969-75

Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions

Части соединительные стальные с цилиндрической резьбой для трубопроводов р=1,6 МПа. сгоны Основные размеры

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1676 dated 10.30.91

The standard applies to steel drifts with zinc coating and uncoated with a cylindrical thread, which are used to connect water and gas pipes, using a sealer, in heating systems, water mains, gas pipelines and other systems operating in non-corrosive environments (water, saturated steam and others) at a temperature of the conducted medium not higher than 175 ° C and a pressure P = 1.6 MPa.

Стандарт распространяется на стальные сгоны с цинковым покрытием и без покрытия с цилиндрической резьбой, служащие для соединения водогазопроводных труб, с применением уплотнителя, в системах отопления, водопровода, газопровода и других системах, работающих в условиях неагрессивных сред (вода, насыщенный водяной пар, горючий газ и др.) при температуре проводимой среды не выше 175 °С и давлении Р=1,6 МПа.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 4

Approved: Gosstandart of the USSR, 12/29/1975

SKU: RUSS15619

Price: $8.00

English keywords: metal fittings;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.40 Metal fittings »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.40 Metal fittings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V62 Steel pipes and their connecting parts »

National Standards for OKSTU » INDUSTRIAL PIPELINE FITTINGS AND GATE VALVES » Industrial pipeline steel fittings (including gate valves) »


As a Replacement Of:

GOST 8969-59: Connecting parts steel with a cylindrical thread for pipelines Pd = 16 kgf / cm2. Pipe joints. Basic dimensions

The Document References:

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 10704-76: Electric welded longitudinal steel pipes. Assortment

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа

The Document is Referenced By:

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа

GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

PKO-2010.6: Reference materials for the design work of the electrical part of the project

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems

VSN 370-93: Instructions for the installation of electrical wiring in pipes

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!