GOST 17.4.3.04-85
ГОСТ 17.4.3.04-85
|
|
Nature protection. Soils. General requirements for contamination control and protection
Общие требования к контролю и охране от загрязнения.
Status: Valid - Only on the territory of the Russian Federation. The limitation of effectiveness has been lifted: Order of the Ministry of Natural Resources of Russia No. 60 of 04.16.92
The standard establishes general requirements for the control and protection of soil from pollution in the process of production and non-production activities. The standard is designed to control soil pollution by emissions, discharges, waste, run-off and sewage sludge from industrial enterprises, housing and communal services, agriculture, transport and other sources of soil pollution, as well as chemicals for agricultural and forest lands. The standard does not apply to the soils of industrial areas, as well as to soils contaminated as a result of fugitive emissions, breakthrough of sewage treatment plants, transport pipelines and other emergencies.
Стандарт устанавливает общие требования к контролю и охране почв от загрязнения в процессе производственной и непроизводственной деятельности. Стандарт предназначен для контроля за загрязнением почв выбросами, сбросами, отходами, стоками и осадками сточных вод промышленных предприятий, жилищно-коммунального хозяйства, сельского хозяйства, транспорта и других источников загрязнения почв, а также средствами химизации сельскохозяйственных и лесных угодий. Стандарт не распространяется на почвы территорий промышленных площадок, а также на почвы, загрязненные в результате неорганизованных выбросов, прорыва очистных сооружений, транспортных трубопроводов и других аварийных ситуаций.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
12/17/1985
SKU: RUSS15657
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
13.020.01 Environment and environmental protection in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.020 Environmental protection »
13.020.01 Environment and environmental protection in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
System of standards in the field of nature protection and improvement of natural resources use »
The Document References:
GOST 14189-81: Pesticides. Rules for acceptance, methods of sampling, packing, marking, handling and storage
GOST 17.4.1.02-83: Nature protection. Soils. Classification of chemicals for pollution control
GOST 17.4.2.01-81: Nature protection. Soils. Nomenclature of sanitary conditions indices
GOST 27593-88: Soils. Terms and definitions
The Document is Referenced By:
GOST 17.4.3.05-86: Nature protection. Soils. Requirements for waste water and its sediments for irrigation and fertilization
GOST 30095-93: Polyester moulding materials (premixes). General specifications
GOST 30561-2013: Sugar beet molasses. Specifications
GOST 31896-2012: Liquid sugar. specifications
GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications
GOST 33123-2014: Pipe culverts made of polymer composites. Specifications
GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications
GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements
GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications
GOST 33370-2015: Staple chemical fibres for reinforcement of building materials and structures. General specifications
GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications
GOST R 17.4.3.07-2001: Nature protection. Soils. Requirements for sewage sludge use for fertilization
GOST R 51185-98: Tourist services. Means of accommodation. General requirements
GOST R 51768-2001: Resources saving. Waste treatment. Methods for determination of mercury in mercury containing waste. General requirements
GOST R 52304-2005: Sugar beet molasses. Specifications
GOST R 53035-2008: Liquid sugar. Specifications
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications
GOST R 55072-2012: Fiberglass reinforced thermosetting plastic vessels. Specifications
GOST R 55073-2012: Resistance polymer composites for repairing industrial pipe-line. Specifications
GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications
GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications
GOST R 55838-2013: Environmental keeping of write off production beside their utilization. General technical requirements
GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications
GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications
GOST R 56916-2016: Natural combustible gas. Determination of water vapours content by Karl Fisher method
GOST R 57111-2016: Specialized food products. Order to control the content of nanomaterials used in agriculture
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
ODM 218.2.064-2015: Methods for strengthening the slopes of the roadbed of roads by sowing grass in various climatic zones
ODM 218.2.099-2019: Guidelines on the features of environmental engineering surveys in the design of public roads
Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities
OST 10 294-2002: Agricultural land of the steppe zone of the Russian Federation. Indicators of soil fertility
OST 10 295-2002: Agricultural land of the forest-steppe zone of the Russian Federation. Indicators of soil fertility
OST 10 296-2002: Agricultural land of the forest-tundra-north-taiga, middle-taiga and south-taiga-forest zones of the Russian Federation. Indicators of soil fertility
OST 10 297-2002: Agricultural land of dry-steppe and semi-desert zones of the Russian Federation. Indicators of soil fertility
OST 153-39.4-027-2002: The technology of dismantling of the linear part of main oil pipelines
OST 32 30-94: Protection of Nature. Flora. Protective forest plantations of railways. Terms and Definitions
PNST 355-2019: Palm oil and its fractions. General specifications
PNST 756-2022: Environmental protection. Recommendations on formation of environmental safety and environmental protection requirements
RD 152-001-94: Ecological requirements for transportation enterprises
RD 153-39.4-115-01: Unit Standards for Generation of Production and Consumption Wastes During Construction and Operation of Production Facilities of Open Joint Stock Company "AK Transneft
RD 31.31.37.07-83: Standards for technological design of seaports. Section 18. Environmental Protection
RD 39-0147098-005-88: Environmental Protection Regulations for the Production, Treatment, and Transportation of Crude Oil
RD 39-127-93: Ecological certificate of oil-field
RD 39-133-94: Instructions for protecting the environment during onshore oil and gas well construction
RD 51-1-96: Instruction on protection of environment during construction of onshore wells at fields containing multicomponent hydrocarbons, including hydrosulphuric hydrocarbons.
RD 52.18.697-2007: Observations of residual quantities of pesticides in environmental objects. Organization and procedure. NGO "Typhoon"
RD 52.18.827-2016: Mass fraction of mercury in samples of soil, ground, bottom sediments and biomaterial. Measurement procedure by cold vapour atomic absorption spectroscopy
RD 52.18.843-2017: Mass fraction of mercury in organic compounds in samples of soils, bottom sediments and biological material. Measurement procedure by atomic absorption spectroscopy of "cold steam"
RDT 06-2011: General requirements for the competence of laboratories (centers) performing measurements for the purpose of monitoring the environment and its pollution
SP 1.2.1170-02: Hygienic requirements to safety of agrochemicals
SP 11-102-97: Engineering environmental site investigations for construction
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 37.13330.2012: Industrial transport
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 407.1325800.2018: Excavation. Rules for the performance of work by hydromechanization
SP 46.13330.2012: Bridges and pipes
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 86.13330.2014: Main (Trunk) pipelines
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VRD 39-1.13-056-2002: Purification technology for different mediums and surfaces contaminated with hydrocarbons
VRD 39-1.13-057-2002: Work Management Procedure for Environmental Protection During Well Construction
VSN 51-1-97: Work Execution Requirements for Overhaul of Trunk Pipelines
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.