GOST 28338-89

ГОСТ 28338-89

Nominal bores (nominal sizes)

Соединения трубопроводов и арматура. Номинальные диаметры. Ряды

Status: Effective - Introduced for the first time

The standard applies to connections of pipelines and valves and sets a number of values of nominal diameters, as well as their designations. The standard does not apply to air conditioning and ventilation systems.

Стандарт распространяется на соединения трубопроводов и арматуру и устанавливает ряд значений номинальных диаметров, а также их обозначения. Стандарт не распространяется на системы кондиционирования воздуха и вентиляции.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 11/21/1989

SKU: RUSS15684




Price: request_a_quote

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.5 Steam traps »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.4 Disk locks and reverse locks »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.3 Cranes »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.2 Shut-off, regulating, check, safety valves »

Standards for pipe fittings (TPA) » 4. Standards for basic parameters of injection molding machines » 4.1 Gate valves »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G10 Classification, nomenclature and general rules »


The Document References:

ST SJeV 254-88: Pipeline connections and fittings. Conditional passages

The Document is Referenced By:

ATK 26-18-13-96: Flanges for reinforcing connecting parts and pipelines for corrosive environments on Ru from 0.6 to 16.0 MPa. Design, dimensions and general technical requirements

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 12678-80: Direct-acting pressure regulators. Main parameters

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21971-76: Threaded piping joints. Conventional passages (nominal sizes). Series

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33662.2-2015: Refrigeration systems and heat pumps. The requirements of safety and environmental protection. Part 2. Design, construction, fabrication, testing, marking and documentation

GOST 34183-2017: Оil and oil products trunk pipeline transportation. Oil centrifugal pumps. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 34564-2019: The main pipeline transport of oil and oil products. Gear pumps. General specifications

GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34569-2019: The main pipeline transport of oil and oil products. Devices for discharge of bulk oil and petroleum products. General specifications

GOST 34609-2019: Ball valves and taps with cone closing element with manual control for gas installations in buildings

GOST 34904-2022: Ship pipeline valves. General specifications

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST 4666-2015: Pipeline accessories. Requirements for marking

GOST 4666-75: Valves. Marking and distinctive painting

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods

GOST 9218-86: Tanks for food liquids mounted on vehicles

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions

GOST EN 378-1-2014: Refrigerating systems and heat pumps. The requirements of safety and environmental protection. Part 1. Basic requirements, definitions, classification and selection criteria

GOST R 50618-93: Metal single layer bellows for compensation. Types, general specifications

GOST R 50619-93: Metal multylevels bellows for compensation. Types, general requirements

GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods

GOST R 51049-2019: Fire fighting equipment. Pressure head fire hoses. General technical requirements. Test methods

GOST R 51208-98: Quick-action couplings of hydraulic systems of tractors and agricultural machines. Mounting dimensions and technical requirements

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 51844-2001: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51844-2009: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52316-2005: Fire equipment. Thermal equipment trips. General technical requirements. Test methods

GOST R 52376-2005: Heat-resistant spiral-wound gaskets. Types. Main dimensions

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53790-2010: Non-traditional technologies. Energetics of biowastes. General technical requirements for biogas sets

GOST R 54086-2010: Pressure regulators. General specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54823-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58540-2019: Fire fighting equipment. Semi-rigid pressure fire hoses. General technical requirements. Test methods

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 58621-2019: The main pipeline transport of oil and oil products. Hose of a high pressure. General specifications

GOST R 58674-2019: Oil vessels and oil berths. Electrostatic and galvanic intrinsic safety. General technical requirements

GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications

GOST R 8.637-2007: State system for ensuring the uniformity of measurements. Certified reference materials for metrological maintenance of pipeline non-destructive testing equipment. General requirements

Manual: Manual for impulse and low consumption fire extinguishing systems

NPB 189-00: Fire-fighting equipment. Air-foam nozzles. General technical requirements. Test methods

NPB 306-2002: Fire-fighting equipment. Suction gauzes. General technical requirements. Test methods

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

OST 68-1.3-97: Order of development, coordination and approval of technical conditions for products manufactured in the Roskartographia system (Russian system of geodesy and cartography)

PNST 790-2022: Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications

RD 26-07-27-99: Pipeline gate valves. Classes and rates of gates sealibility

RST RSFSR 793-91: Valves, type distributing for fuels, oils and special liquids. General technical conditions

SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design

SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations

ST RK 1437-2005: On-board units for locomotive equipment. Design, overall and connection dimensions

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 022-2005: General industrial pipeline valves supplied to nuclear power plants. General technical requirements

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

TU 102-488.1-05: Connecting details and nodes of main pipelines on Рр up to 10 MPa (100 kgf

TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK

Customers Who Viewed This Item Also Viewed:

Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $217.00
Steam and drinking water quality norms, water and chemical QC oversight and chemical control of steam stationary exhaust heat boiler for energy industry
Language: English
Price: $698.11
Armour clothes. Classification and general technical requirements
Language: English
Price: $38.00
Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
Language: English
Price: $640.00
Loads and impacts
Language: English
Price: $306.00
Pipeline valves. Methods of control and testing
Language: English
Price: $417.00
Occupational safety standards system. Personal protective equipment against falls from a height. Rescue harness. General technical requirements. Test methods
Language: English
Price: $250.00
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $359.00
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of welded joints and cladded surfaces
Language: English
Price: $611.00
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of austenitic steel welded joints
Language: English
Price: $226.00
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination
Language: English
Price: $282.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Eddy current control
Language: English
Price: $414.00
Conformity assessment system in the field of atomic energy use. Joints of welded parts from steels of various structural classes for equipment and pipelines of nuclear power plants. The procedure for ultrasonic testing
Language: English
Price: $267.00
Baby diapers. General specifications
Language: English
Price: $267.00
Feeds for non-productive animals. General technical conditions
Language: English
Price: $539.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!