imgalt

GOST 11505-75

ГОСТ 11505-75

Petroleum bitumen. Method for determination of ductility

Битумы нефтяные Метод определения растяжимости

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to petroleum bitumen establishes a method for determining ductility.

Стандарт распространяется на нефтяные битумы устанавливает метод определения растяжимости (дуктильности).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/29/1975

SKU: RUSS15709

Price: $101.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B49 Test methods. Packaging. Marking »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 11505-65: Bitumens. Method for determination of ductility

The Document References:

GOST 13830-97: Food common salt. General specifications

GOST 17299-78: Technical ethyl alcohol. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 28498-90: Liquid-in-glass thermometers

GOST 3479-85: Tissue paper. Specifications

GOST 6034-74: Dextrins. Specifications

GOST 6259-75: Reagents. Glycerin. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 6823-2000: Crude natural glycerine. General specifications

GOST R 51574-2000: Food common salt. Specifications

The Document is Referenced By:

DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers

GOST 15836-79: Bitumen-rubber insulating mastic. Specifications

GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements

GOST 18659-81: Bitumen road emulsions. Technical requirements

GOST 22245-76: Viscous petroleum road bitumens. Specification

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods

GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods

GOST 6617-76: Petroleum construction bitumen

GOST 8771-76: Petroleum bitumen for filling accumulator mastics

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications

GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9812-74: Petroleum insulating bitumen

GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications

GOST R 52128-2003: Bitumen road emulsions. Specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions

Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields

Manual for SNiP 3.06.03-85: Manual for surface treatment on roads

Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88

MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.2.004-2006: Recommendations for the determination of resistance to aging and viscosity of bitumen

ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use

ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.021-2011: Guidelines for the selection of compositions of asphalt mixes, taking into account the effect of adhesive additives on the aging of organic binders in bitumen-mineral mixtures

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Recommendations 706: Recommendations on application of asphalt concrete on the basis of different strength stone materials

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)

TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives

TU 218 RSFSR 541-85: Road asphalt mixes from rubble of different strength. Technical conditions

TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete

TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications

TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete

TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete

TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials

TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes

TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete

TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads

VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!