GOST 9965-76

ГОСТ 9965-76

Petroleum for oil-processing plants. Specifications

Нефть для нефтеперерабатывающих предприятий. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to oil supplied to refineries and intended for processing. The standard does not apply to oil, unique in physical and chemical composition.

Стандарт распространяется на нефть, поставляемую нефтеперерабатывающим предприятиям и предназначенную для переработки. Стандарт не распространяется на нефти, уникальные по физико-химическому составу.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 11/4/1976

SKU: RUSS15737

Price: $18.00

English keywords: raw oil;

National keywords: сырая нефть;


The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.2 Testing and control of products of fuel and energy industry » 4.2.2 Oil, oil products and gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.040 Crude oil »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.040 Crude oil »

National Standards for KGS (State Standards Classification) » Latest edition » A. Mining. Minerals » A2 Hydrocarbon minerals » A22 Crude Oil »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Extracted oil, oil directed to preparation, treated oil, oil by type of supply and natural ozokerite »


As a Replacement Of:

GOST 9965-62: Oil supplied from the fields for processing. Technical requirements

The Document References:

GOST 11011-85: Petroleum and its products. Method for determination of fraction composition by apparatus APH-2

GOST 1437-75: Dark petroleum products accelerated method for determination of sulfur

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure

GOST 1756-52: Petroleum products. Determination of saturated vapors pressure

GOST 21534-76: Petroleum The determination of chloride salts content

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 3877-88: Petroleum products. Determination of sulfur by calorimetric bomb method

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

The Document is Referenced By:

GOST 11209-2014: Fabrics for protective clothing. Technical general requirements. Methods for testing

GOST 12.4.129-2001: Occupational safety standards system. Special foot-wear, personal means of hands protection, special protective clothes and materials for their manufacture. Method for determination of petroleum and petroleum products penetration

GOST 12.4.129-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petrolеum and petrolеum products penetration

GOST 12.4.130-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petroleum and petroleum products resistance

GOST 12.4.165-2019: Occupational safety standards system. Personal Protective Equipment Special shoes with leather upper. Method for determining the coefficient of reduction in the strength of fastening from exposure to aggressive environments

GOST 12.4.165-85: Occupational safety standards system. Protective leather footwear. Determination of the coefficient of attachment strength decrease due to aggressive media action

GOST 12.4.168-85: Occupational safety standards system. Polymers means for protection of hands. Method for determination of petroleum and petroleum products penetration

GOST 13379-82: Petroleum. Determination of C1-C6 hydrocarbons by method of gas chromatography

GOST 26976-86: Petroleum and petroleum products. Methods of mass measurement

GOST 9.506-87: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals in water-petroleum environments. Methods of protective ability evaluation

GOST R 12.4.290-2013: Occupational safety standards system. Special clothing to protect from oil and oil products. Technical requirements

GOST R 54567-2011: Petroleum. Requirements for chemical products ensuring their safe application in petroleum industry

GOST R 57649-2017: Microbiological products. Bacterial neftedestruktor. Specifications

GOST R 57877-2017: Fabrics for protective clothing. General specifications

IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory

MI 2153-2001: State system for ensuring uniformity of measurements. Density of oil. Requirements for the method of performing measurements by the areometer with the operations taken into account

MI 2366-96: Recommendation. State system for ensuring uniformity of measurements. Hydrometers of oil type UDVN. Verification Method

MI 2444-97: Recommendation. State system for ensuring uniformity of measurements. Sulfur content in total oil. Measurement technique on an ASOMA 282T X-ray fluorescence analyzer

MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method

MI 2632-2001: Recommendation. State system for ensuring uniformity of measurements. Density of oil and oil products and coefficients of volume expansion and compressibility. Methods and calculation program

MI 2637-2001: State system for ensuring uniformity of measurements. The density of oil and oil products at 20 degrees Celsius. Density Conversion Tables

MI 2693-2001: Crude Oil Metering Oil Production Facilities

OST 39-095-79: Automated modular oil treating equipment

RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation

RD 39-0147103-318-86: Oil treatment technology using LAU reagent

RD 39-0147103-319-86: Technology for protection of high-temperature equipment for oil preparation from salt deposits

RD 39-0147103-354-89: Model Provision for a Laboratory Performing Oil Analysis for Acceptance Operations

RD 39-0147103-388-87: Methodical instructions for determining the technological losses of oil at the enterprises of the Ministry of Petroleum Industry

RD 39-030-90: Technology of complex processing of oil emulsions by demulsifiers and corrosion inhibitors

RD 39-1-1261-85: Technological regulations on the use of demulsifiers in oil preparation processes

RD 39-1-159-79: Unified technological schemes of complexes for collecting and preparing oil, gas and water in oil producing regions

RD 39-1-294-79: The technology of using polyelectrolytes to combat salt deposits in oil treatment apparatus. Instructions for use

RD 39-1-401-80: Guidelines for the use of demulsifying reagents for oil demulsification in fields in Western Siberia

RD 39-23-1082-84: Instructions on the technology of the use of inhibitors for protection against local corrosion of low-pressure conduits of the reservoir pressure maintenance system

RD 39-30-577-81: Method of thermal hydraulic calculation of pipelines for stationary pumping of Newtonian oils, taking into account friction heat

RD 39-30-627-81: Instruction on oil accounting at oil and gas production corporations

RD 39-30-678-82: Instructions for the accounting of oil at oil pipelines

RD 39-30-731-82: Typical methodology for conducting comparative measurements of the amount of marketable oil by meters and calibrated reservoirs at oil collection points

RD 39-30-898-83: Instructions for the study of oils and oil emulsions in order to provide initial data for the design of oil treatment plants

RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water

RD 39-5-649-81: Rules of industrial commissioning of petroleum quantity measuring systems

RD 39-5-770-82: Instructions On Determination of Oil Quantity On Automated Metering Systems With Turbine Counters During Metering Or Calculations

RMG 112-2010: State system for ensuring the uniformity of measurements. Tanks of river and sea liquid cargo vessels. Procedure of verification by volumetric method

TU 39-1435-89: Oil for transportation to consumers. Technical conditions

VNTP 3-77: Norms of technological design of facilities for the collection, transport, preparation of oil, gas and water of oil fields

VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields

Customers Who Viewed This Item Also Viewed:

Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
Language: English
Price: $28.00
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $58.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $177.00
Straight and diamond knurl. Form and basic dimensions
Language: English
Price: $76.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
Language: English
Price: $142.00
White sugar. Specifications
Language: English
Price: $279.00
Pipeline valves. Methods of control and testing
Language: English
Price: $246.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Pipeline valves. Leakage rates of valves
Language: English
Price: $175.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $104.00
Graphite electrodes and nipples. Specifications
Language: English
Price: $279.00
Welded steel pipes for gas and oil pipelines. Technical specifications
Language: English
Price: $90.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!