GOST 11506-73
ГОСТ 11506-73
|
|
Petroleum bitumen. The method of the determination of softening point by ring and ball
Битумы нефтяные Метод определения температуры размягчения по кольцу и шару
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to oil bitumens, bitumen compositions, raw materials for the production of bitumen, tar, deasphalting asphalt and similar petroleum products and establishes a method for determining the softening temperature of these products on the ring and ball from 20 to 200 ° C.
Стандарт распространяется на нефтяные битумы, битумные составы, сырье для производства битумов, гудроны, асфальты деасфальтизации и подобные им нефтепродукты и устанавливает метод определения температуры размягчения этих продуктов по кольцу и шару от 20 до 200 °С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/18/1973
SKU: RUSS15750
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.140 Paraffins, bituminous materials and other petroleum products »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.140 Paraffins, bituminous materials and other petroleum products »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B4 Petroleum products for industrial and domestic consumption »
B49 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Petroleum and shale bitumens »
As a Replacement Of:
GOST 11506-65: Bitumens. Determination of the softening point
The Document References:
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 6034-74: Dextrins. Specifications
GOST 6259-75: Reagents. Glycerin. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 6823-2000: Crude natural glycerine. General specifications
GOST 6824-96: Distilled glycerin
The Document is Referenced By:
DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers
GOST 10587-84: Uncured epoxy resins. Specifications
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 15125-92: Styroflex, high-frequency, balanced, communication cables
GOST 15836-79: Bitumen-rubber insulating mastic. Specifications
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 17584-72: Cast iron joining rings and fittings for asbestos cement pressure pipes
GOST 18659-81: Bitumen road emulsions. Technical requirements
GOST 21822-87: Petroleum fragile bitumens. Specifications
GOST 22245-76: Viscous petroleum road bitumens. Specification
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 26589-94: Roofing and waterproof mastics. Methods of testing
GOST 2678-87: Rolled roofing and hydroinsulatings materials. Methods of test
GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing
GOST 2889-80: Bitumen hot mastic for roofing. Technical requirements
GOST 28967-91: Petroleum bitumens. X-ray phase method for determination of paraffin
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods
GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods
GOST 4641-80: Сoal tars for road constructions
GOST 515-77: Bitumized and tarred packaging paper
GOST 6617-76: Petroleum construction bitumen
GOST 6942.0-80: Cast iron waste pipes and fittings. General specifications
GOST 6942-98: Cast iron waste pipes and fittings Specifications
GOST 6997-77: Compositions for filling cable joints. Specifications
GOST 781-78: Bitumen oil high-melting softener
GOST 8771-76: Petroleum bitumen for filling accumulator mastics
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9548-74: Roofing petroleum bitumens. Specifications
GOST 9812-74: Petroleum insulating bitumen
GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 52576-2006: General use highways. Road marking materials. Test methods
GOST R 53171-2008: Automobile roads of general use. Road marking wares. Preformed road markings. Methods of checking
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55420-2013: General use highways. Cationic road bitumen emulsions. Specifications
GOST R 56211-2014: Uncured epoxy resins. Specification
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.2.004-2006: Recommendations for the determination of resistance to aging and viscosity of bitumen
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.013-2011: Guidelines for the use of bitumen emulsions when arranging protective layers of wear from cast emulsion-mineral mixtures
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces
ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications
OST 3-6461-88: Polishing and affixing resin. General technical specifications.
RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Recommendations 706: Recommendations on application of asphalt concrete on the basis of different strength stone materials
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives
TU 218 RSFSR 541-85: Road asphalt mixes from rubble of different strength. Technical conditions
TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete
TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications
TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete
TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete
TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials
TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes
TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete
TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads
VSN 4-94: Industry-Specific Building Code for Installation of Heating Supply Networks with Pipes Insulated with Cold-Applied Heat-Resistant Bitumen-Rubber Mastic
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.