GOST 8731-74
ГОСТ 8731-74
|
|
Seamless hot-deformed steel pipes. Specifications
Трубы стальные бесшовные горячедеформированные Технические требования
Status: Valid - Supersedes
The standard applies to general-purpose hot-rolled seamless pipes made of carbon and alloy steel.
Стандарт распространяется на горячедеформированные бесшовные трубы общего назначения из углеродистой и легированной стали.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/19/1974
SKU: RUSS15843
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
As a Replacement Of:
GOST 8731-66: Pipes of steel, seamless hot-rolled. General technical requirements
The Document References:
GOST 10006-80: Metal pipes
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic
GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3728-78: Tubes. Method of bend-over test
GOST 380-94: Normal quality carbon steel
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 4543-71: Structural alloyed steel
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 8731-66: Pipes of steel, seamless hot-rolled. General technical requirements
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9567-75: Precision steel tubes. Range
The Document is Referenced By:
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions
GOST 15120-79: Shell-and-tube chillers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 21963-82: Cutoff wheels
GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23270-78: Pipe-billets for machining. General specifications
GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions
GOST 25.503-80: Strength calculation and testing. Methods of mechanical testing of metals compression test method
GOST 25455-82: Rolling bearings. Tapered and withdrawal sleeves. Technical requirements
GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design
GOST 3050-77: Hose joints for flexible hoses
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST 30872-2002: Air cooling machines. General specifications
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 32247-2013: Hard coals. Method for determination of the IGI-VUHIN swelling value
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34329-2017: Formworks. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump
GOST 4610-49: Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 9567-75: Precision steel tubes. Range
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51383-2012: Automatic burner gas forced air. Technical safety requirements and test methods
GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions
GOST R 52609-2006: Hard coals. Method for determination of the IGI-VUHIN swelling value
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52664-2006: Welded pipe sheet piles. General specifications
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55260.1.5-2012: Hydro power plants. Part 1-5. Hydrotechnical constructions of hydroelectric power station. Requirements for projection in seismic areas
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 55778-2013: Jet guns. Technical conditions
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MI 1069-85: State system for ensuring uniformity of measurements. Methodical instructions. Machine-oriented data recording system for metals (alloys)
MRR 2.2.14-06: Handbook for the preparation, maintenance and execution of the working draft of the development and engineering preparation of the territory
OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification
OST 153-34.0-1004-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring. Design and dimensions
OST 153-34.0-1004-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring bloc of hang. Design and dimensions.
OST 153-34.0-1006-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring support. Design and dimensions
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions
OST 26-02-2060-79: Underground horizontal drainage tanks. Specifications
OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.
OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.
OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.
OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 34-10-699-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf
OST 34-10-700-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-569-82: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-42-658-84: Parts and assembly units of NPP pipelines Rwork <2.2 MPa (22 kgf/cm2) T ≤ 350 ° C. Pipes and stock. Assortment.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 35-09-86: Hoisting machinery and equipment. General specifications.
OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-41-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Types and basic parameters.
OST 36-62-81: Hoisting equipment. General technical requirements.
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.
RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-11.354-2001: Recommended Practice for Design and Use of Special Orifice Devices for Measurement of Fuel Oil Consumption at Thermal Power Stations
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 22-207-88: Lifting machines. General requirements and production standards
RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.
RD 24.200.13-90: Seamless steel pipes. Methodic of uniformity incoming ultrasonic control.
RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 31.48.01.01-81: Spare parts for gantry cranes of foreign construction. Assembly units and parts. Technical requirements
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID
RD 39-9-254-79: Guidelines for the design of oilfield facilities using a waterflooding method with polymers
RD EO 0657-2006: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution: Rules for the design and safe operation of steam and hot water boilers
RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
RTM 6.030-1-87: Large systems of community TV reception
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry
SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of
SN 421-71: Consumption rates of materials, pipes, sanitary ware and heating devices for 1 million rubles. estimated cost of construction and installation works. Non-ferrous metallurgy
SN 425-71: Consumption rates of materials, pipes, sanitary wares and heating devices per 1 million rubles. estimated cost of construction and installation works. Ferrous metallurgy
SN 425-78: Consumption rates of materials and products for 1 million rubles. estimated cost of construction and installation works
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas
SNiP II-45-75: Main pipelines
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 16.13330.2011: Steel structures
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 294.1325800.2017: The construction of steel. Design rules
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-104-2000: Design of independent heat supply sources
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
SP 510.1325800.2022: Heating units and internal heating systems
SP 53-102-2004: General rules for steel structure design
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.2-2004: Pipe fittings. Metals used in the valve industry. Part 2. Reference data on the properties of materials
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
TR 126-01: Technical recommendations on the technology of application of various industrial wastes, dornita in road construction
TR 147-03: Technical recommendations for the construction of road structures from cast concrete mixes
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-488-95: Connecting parts and nodes of trunk pipelines on RR up to 10 MPa (100 kgf / cm2)
TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK
TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating
TU 1390-002-86695843-08: Steel pipes and parts of pipes with internal anti-corrosion coating based on highly viscous materials
TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm
TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials
TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating
TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating
TU 1394-006-86695843-10: Steel pipes with epoxy protective coating
TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions
TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields
TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-523-76: Steel pipes lined with high density polyethylene. Technical conditions
TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry
TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications
TU 1469-006-00153229-2001: Parts connecting on Рр up to 16 MPa (160 kgf
TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3-120-81: Expansion Bellows, Axial , Loaded. Technical Specifications
TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs
TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3615-018-00217320-2006: Spherical tanks. Technical specifications
TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases
TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications
TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines
VNTP 13-2-85: Standards for technological design of mining enterprises of metallurgy with underground mining method
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures
VSN 2-139-82: Instructions on the technology of butt welding of small-diameter pipes with large wall thicknesses
VSN 362-87: Disinfections and Etching of Pipelines
VSN 36-86: Installation of Lining in Underground Hydraulic Structures Constructed in Rocky Permafrost Soils
VSN 506-88: Design and construction of ground anchors
VSN 51-3-85: Design of field steel pipelines
Customers Who Viewed This Item Also Viewed:
 |
Petroleum for oil-processing plants. Specifications
Language: English |
Electrical articles. General requirement for environment mechanical stability
Language: English |
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English |
Power transformer on-load tap-changing devices. General specifications
Language: English |
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English |
Glass and glass products. Visual faults. Terms and definitions
Language: English |
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English |
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English |
Crude petroleum. General specifications
Language: English |
Power transformers. Test methods of tap changing devices
Language: English |
Unified system for design documentation. Stages of designing
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English |
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
Water quality. Sewage water
Language: English |
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English |
Passenger cars. Windscreen wiper and washer systems. Technical requirements and test methods
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.