imgalt

GOST R 50599-93

ГОСТ Р 50599-93

Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

Сосуды и аппараты стальные сварные высокого давления. Контроль неразрушающий при изготовлении и эксплуатации

Status: Effective - Introduced for the first time

This standard applies to steel welded vessels and apparatus designed for operation under internal overpressure from 10 to 130 MPa at a wall temperature not lower than minus 40 and not higher than 525 degrees. C, and establishes: 1) methods of non-destructive testing (visual, color, magnetic powder, ultrasound, radiographic) of vessels and devices in the process of their manufacture and operation; 2) the basic requirements for the control; 3) assessment of the quality of vessels and apparatus based on the results of non-destructive testing

Настоящий стандарт распространяется на стальные сварные сосуды и аппараты, предназначенные для эксплуатации под внутренним избыточным давлением свыше 10 до 130 МПа при температуре стенки не ниже минус 40 и не выше 525 град. С, и устанавливает: 1) методы неразрушающего контроля (визуальный, цветной, магнитопорошковый, ультразвуковой, радиографический) сосудов и аппаратов в процессе их изготовления и эксплуатации; 2) основные требования к проведению контроля; 3) оценку качества сосудов и аппаратов по результатам неразрушающего контроля

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 10/25/1993

SKU: RUSS15894

Price: $418.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » welding equipment »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 10. Production » 10.6 Non-destructive testing »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G49 Test methods. Packaging. Marking »

National Standards for OKSTU » CHEMICAL AND PETROLEUM ENGINEERING » Control methods (testing, analysis, measurements) »


The Document References:

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements

GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements

GOST 12.2.007.12-88: Chemical current sources

GOST 12.2.007.13-88: Electric light bulbs

GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations

GOST 12.2.007.5-75: Occupation safety standards system. Safety requirements. Power capacitors. Capacitor installations

GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v

GOST 12.2.007.7-83: Occupation safety standards system. Safety requirements. Factory-built assemblies of regulating equipment

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.007.9-88: Electrothermal equipment

GOST 12.2.007.9-93: Electric heating equipment safety

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.016-83: Occupational safety standards system. Special protective clothes. Nomenclature of quality indexes

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22727-88: Rolled sheet. Ultrasonic test methods

GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results

GOST 23764-79: Gamma-defectoscopes. General technical specifications

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3242-79: Welded joints

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation

The Document is Referenced By:

Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 33807-2016: Safety of attractions. General requirements

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications

GOST R 53130-2008: Safety of attractions. General requirements

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements

GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!