imgalt

GOST 11501-78

ГОСТ 11501-78

Petroleum bitumen. Method for determination of depth of penetrometer needle penetration

Битумы нефтяные. Метод определения глубины проникания иглы.

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 141 of 02/12/92

The standard applies to oil bitumens and establishes a method for determining needle penetration (penetration).

Стандарт распространяется на нефтяные битумы и устанавливает метод определения проникания иглы (пенетрации).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 9/6/1978

SKU: RUSS15911

Price: $89.10



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.140 Paraffins, bituminous materials and other petroleum products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B49 Test methods. Packaging. Marking »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 11501-73: Bitumens. Method for determination of depth of penetrometer needle penetratio

The Document References:

GOST 13830-97: Food common salt. General specifications

GOST 1440-78: Instruments for determination of petroleum products penetration. General specifications

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 28498-90: Liquid-in-glass thermometers

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 7580-91: Technic oleic acid. Specifications

GOST R 51574-2000: Food common salt. Specifications

The Document is Referenced By:

DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers

GOST 18659-81: Bitumen road emulsions. Technical requirements

GOST 21822-87: Petroleum fragile bitumens. Specifications

GOST 22245-76: Viscous petroleum road bitumens. Specification

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 6617-76: Petroleum construction bitumen

GOST 7658-74: Synthetic high-melting ceresin. Specifications

GOST 781-78: Bitumen oil high-melting softener

GOST 8771-76: Petroleum bitumen for filling accumulator mastics

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications

GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9548-74: Roofing petroleum bitumens. Specifications

GOST 9812-74: Petroleum insulating bitumen

GOST R 52056-2003: Polymer-bitumen binders for roads on the basis of block copolymers of styrene-butadiene-styrene type. Specifications

GOST R 52128-2003: Bitumen road emulsions. Specifications

GOST R 55052-2012: Reclaimed asphalt. Specifications

GOST R 55420-2013: General use highways. Cationic road bitumen emulsions. Specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions

Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields

Manual for SNiP 3.06.03-85: Manual for surface treatment on roads

Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products

ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.2.004-2006: Recommendations for the determination of resistance to aging and viscosity of bitumen

ODM 218.2.025-2012: Expansion joints of automobile bridges

ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use

ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)

ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.013-2011: Guidelines for the use of bitumen emulsions when arranging protective layers of wear from cast emulsion-mineral mixtures

ODM 218.3.020-2012: Guidelines for ensuring the stability of bitumen against aging in technological processes of manufacturing and using asphalt concrete mixtures

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Recommendations 706: Recommendations on application of asphalt concrete on the basis of different strength stone materials

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SNiP 3.06.03-85: Automobile roads

STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)

TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives

TU 218 RSFSR 541-85: Road asphalt mixes from rubble of different strength. Technical conditions

TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete

TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications

TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete

TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete

TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials

TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes

TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete

TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures

VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders

VSN 175-82: City of Moscow Guidelines for the Construction of Asphalt Concrete Road Pavements

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads

VSN 32-81: Guidelines for hydraulic insulation of structures of bridges and pipes in railway, automobile and city roads

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Waste paper and board. Specifications
Language: English
Price: $169.29
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $160.38
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
Language: English
Price: $251.46
imgalt
Guidelines for gas chromatographic measurement of the content of cyclohexanone and cyclohexanol in the swabs on the skin
Language: English
Price: $478.01
imgalt
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $357.39
imgalt
Medical devices. Safety requirements. Methods of sanitation-chemical and toxicological tests
Language: English
Price: $223.74
imgalt
Gas chromatographic determination of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, isopropanol, acrylonitrile, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, benzene, toluene, ethyl benzene, m-o, and
Language: English
Price: $225.72
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Technical regulations of Customs Union. About safety equipment for use in explosive environments
Language: English
Price: $80.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!